Product Name: DSAW Steel Pipe Product Keyword: Steel Pipe, Welded Pipe, Oil & Gas Pipe, SAW Pipe, DSAW, LSAW, SAWL, Line Pipe, Steel Tube Brief Description: DSAW Steel Pipe, Outside Diameter: 219mm-1820mm, Wall Thickness: 5.0mm-50mm, Length: 6meter-18meter, End-Finish: Square Ends or Beveled for welding Product Details: Process: LSAW (Longitudinal Submerged Arc Welded) DSAW (Double Submerged Arc Welded) Quality Specifications: API 5L Line Pipe ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless ASTM A252 Welded and Seamless Steel Pipe Piles BS: 1387 Steel Tubes for use for Water, Gas, Air and Steam DIN 2458 Welded Steel Pipes And Tubes EN10217 Welded Steel Tubes For Pressure Purposes. Technical Delivery Conditions. Non-Alloy Steel Tubes With Specified Room Temperature Properties IS: 3589 Steel Tubes For Water And Sewage IS : 1978-1982:Steel Tubes For Use In Transportation Of Oil; Gas & Petroleum Products GB/T3091 Welded Steel Pipe For Low Pressure Liquid Delivery GB/T9711 Petroleum And Natural Gas Industries--Steel Pipe For Pipelines SY/T5037 Spiral Submerged Arc-Welded Steel Pipe For Pipelines For Low Pressure Field Fluid Service SY/T 5040 Spiral Submerged Arc-Welded Steel Pipe Piles CJ/T 3022 Spiral Submerged-Arc Welded Steel Pipe For Municipal Heat Supply Steel Grade: API 5L: A, B, X42, X46, X52, X56, X60, X65 X70 ASTM A 53: Gr. A, Gr B, Gr C, Gr. D BS:1387, EN10217:S185, S235,S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, St12, St13, St14, St33, St37, St44, ST52 GB/T 9711: L175, L210, L245, L290, L320, L360, L290, L320, L360, L390, L415, L450, L485, L555 GB/T 3091, SY/T5037, SY/T 5040,CJ/T 3022:Q195, Q215, Q235, Q275, Q295, Q345, 08F, 08, 08AL, 08F, 10F, 10, HG5, DF08 SPHC, M8 Size: Outside Diameter: 219mm-1820mm Wall Thickness: 5.0mm-50mm Length: 6meter-18meter End: Square Ends (Straight Cut, Saw Cut, And Torch Cut) Or Beveled For Welding Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) Coating Standard: ANSI/AWWA C104/A21.4 American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water ISO 21809 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems DIN 30670 Polyethylene coatings of steel pipes and fittings Packing: Plastic Plugs in both ends, Hexagonal Bundles of max. 2,000kg with several Steel Strips, Two Tags on each bundle, Wrapped in Waterproof Paper, PVC Sleeve, and Sackcloth with several Steel Strips, Plastic Caps. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. Mill Test Certificate: EN 10204/3.1B Usage: Used for structure, low pressure liquid delivery of water, gas and oil.
Product name: Mechanical tube Product keyword: Steel pipe, seamless pipe, mechanical tube, structural pipe, steel tube Brief description: Mechanical tube, outside diameter: 6mm to 168.3mm, wall thickness: 0.5mm-25mm, heat-treatment: annealed, stress relieved, normalized Product details: Standards: astm a519, din2391 Sizes: od 6~168.3mm, wall thickness 0.5 ~25mm Heat-treatment: annealed, stress relieved, normalized Surface: passivated, oiled, or bright and smooth Coating: 1. Olive green coated seamless steel pipe Coat thickness: 8-25 micrometers Length of pipe coated: less than 3.5m Free of cr6 2. Galvanized seamless steel pipe Zinc thickness as per customers¡¯ needs and standard requirements Usage examples: A. High pressure fuel tube Standard: din 2391 Specification: 6x1.2, 6x1.5, 6x1.8, 6x2 etc. Surface: bright and smooth B. Automobile air-conditioner tube Process: heat treatment Surface: bright and smooth
Product name: Cylinder tube Product keyword: Steel pipe, seamless pipe, hydraulic cylinder, cylinder pipe, precision pipe, steel tube Brief description: Cylinder tube, outside diameter: 60mm to 299mm, delivery condition: annealing, stress relieve, normalizing, bright annealing, cold-draw Product details: Production standard: gb/t3639 Steel grades: 20#, 45#, 16mn, 25mn, 27simn Od range: 60 mm ~ 299mm Delivery condition: annealing, stress relieve, normalizing, bright annealing, cold-draw Usage: hydraulic cylinder, precision machinery, textile machinery, pressure vessels
Product Name: SSAW Steel Pipe Product Keyword: Steel Pipe, Welded Pipe, Oil & Gas Pipe, SAW Pipe, SSAW, SAWH, HSAW, Line Pipe, Steel Tube Brief Description: SSAW Steel Pipe, Outside Diameter: 219.1mm - 4064mm (8" - 160"), Wall Thickness: 3.2 mm - 40mm, Length: 6meter-18meter, End-Finish: Square Ends or Beveled for welding Product Details: Process: SSAW: Spiral Submerged Arc Welded Quality Standard: API 5L Line Pipe ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless ASTM A252 Welded And Seamless Steel Pipe Piles DIN 2458 Welded Steel Pipes And Tubes EN10217 Welded Steel Tubes For Pressure Purposes. Technical Delivery Conditions. Non-Alloy Steel Tubes With Specified Room Temperature Properties IS: 3589 Steel Tubes For Water And Sewage IS: 1978-1982:Steel Tubes For Use In Transportation Of Oil, Gas & Petroleum Products GB/T3091 Welded Steel Pipe For Low Pressure Liquid Delivery GB/T9711 Petroleum And Natural Gas Industries--Steel Pipe For Pipelines SY/T5037 Spiral Submerged Arc-Welded Steel Pipe For Pipelines For Low Pressure Field Fluid Service SY/T 5040 Spiral Submerged Arc-Welded Steel Pipe Piles CJ/T 3022 Spiral submerged-arc welded steel pipe for municipal heat supply Steel Grade: API 5L: A, B, X42, X46, X52, X56, X60, X65 X70 ASTM A 53: Gr A, Gr B, Gr C, Gr D BS1387, EN10217: S185, S235,S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, St12, St13, St14, St33, St37, St44, ST52 GB/T9711: L175, L210, L245, L290, L320, L360, L290, L320, L360, L390, L415, L450, L485, L555 GB/T3091, SY/T5037, SY/T 5040,CJ/T 3022: Q195, Q215, Q235, Q275, Q295, Q345, 08F, 08, 08AL, 08F, 10F, 10, HG5, DF08 SPHC, M8 Size: Outside Diameter: 219.1mm - 4064mm (8" - 160") Wall Thickness: 3.2 mm - 40mm Length: 6meter-18meter End: Square Ends (straight cut, saw cut, and torch cut) or Beveled for welding Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) Coating Standard: ANSI/AWWA C104/A21.4 American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water ISO 21809 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems DIN 30670 Polyethylene coatings of steel pipes and fittings Packing: Plastic Plugs in both ends, Hexagonal Bundles of max. 2,000kg with several Steel Strips, Two Tags on each bundle, Wrapped in Waterproof Paper, PVC Sleeve, and Sackcloth with several Steel Strips, Plastic Caps. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. Usage: Used for piling, structure, low pressure liquid delivery of water, gas and oil.
Product Name: Seamless Line Pipe Product Keyword: Steel Pipe, Oil & Gas Pipe, Petroleum Pipe, API Pipe, Seamless Pipe, Line Pipe, Steel Tube Brief Description: Seamless Line Pipe, Outside Diameter: 5/8¡± to 36¡±, Wall Thickness: 1.24mm-45mm; Type of End-Finish: BBE or PE Product Details: Operative Standard & Grade: API 5L PSL1, PSL2: Gr B, X42, X52, X56, X60, X65, X70 Addition: NACE MR-0175, ISO 15156 1, 2, 3 ASTM/ASME: A53: GRADE A & B A106: GRADE A, B & C A178: GRADE A, C & D A179/A192/A214/A513: Low Carbon Steel A210: GRADE A-1 & C A213: T2, T5, T11, T22, T91 A333: GRADE 1 & 6 A334: GRADE P5, P11, P22, P91 A500: GRADE A, B, C & D A519: 1008,1010,1020,1026,1035,1045,1050,1518,1524,4118,4130,4135,4140,4142,5115,5120,5140,52100 AMS: AMS-T-6736, 4130 SAE: J524/J525 Low Carbon Steel DIN: DIN2391: ST30, ST35, ST45, ST52 DIN2393: RST34-2, RST37-2, ST44, ST52-3 DIN2394: RST34-2, RST37-2, ST44-2, ST52-3 DIN17175: ST35.8, ST45.8, 17Mn4, 19Mn5, 15Mo3, 13CrMo44, 13CrMo910 DIN2448,1629,1630: ST37, ST37.4, ST44, ST44.4, ST52, ST52.4 BS: BS3059: 320, 360, 440, 243, 620-460, 622-490 BS6323: CFS3, CF3A, CFS5, CFS6, CFS7, CFS8, CFS9, CFS10, CFS11 EN: EN10305-1,2,4: E215, E235, E255, E275, 26Mn5, C35E, C45E, 26Mo2, 25McrMo4, 42CrMo4, E155, E195, E235, E275, E355 EN10216-1: TC1, P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2 EN10216-2: 195GH, P235GH, P265GH, 16MO3, 10CrMo5-5, 13CrMo4-5, 10CrMo9-10 EN10216-3: P275NL1,NL2, P355NL1,NL2; EN10216-4: P215NL1, P255QL, P265NL Size Range: OD 5/8"-36", WT 1.24mm-45mm Type of End-Finish: BBE (Black Beveled Ends) or PE (Plain Ends) Coating: Black Paint or Varnish, Passivation and Oiled, Galvanized Packing: Plastic Plugs in both ends, Bundles of max. 3,000kg with several Steel Strips, Two Tags on each bundle, Wrapped in Waterproof Paper and Sackcloth with several Steel Strips Mill Test Certificate: EN 10204/3.1B USAGE: Oil & Gas Transportation, Heat-Exchanger & Boiler, Low-Temperature Service, Ship-Building, etc.
Product name: Api 5ct tubing pipe Product keyword: Steel pipe, oil & gas pipe, petroleum pipe, api pipe, tubing pipe, steel tube Brief description: Api 5ct tubing pipe, outside diameter: 2-3/8¡± to 4-1/2¡±, steel grade: j55, n80, l80, p110, type of end-finish: eue & nue, length range: r1/r2/r3, manufacture process: seamless or electric-welded (electric-resistance or electric-induction welded), Product details: Standard: api specification 5ct, ninth edition, july 2011, Outside diameter: 2-3/8¡± to 4-1/2¡± (60.32-114.30mm), Steel grade: j55, n80, l80, p110, Range length: r1 (6.10-7.32metres), r2 (8.53-9.75metres), r3 (11.58-12.80metres), Manufacture process: seamless or electric-welded (electric-resistance or electric-induction welded), Type of end-finish: nu (non-upset), eu (external-upset), or pe (plain end, unthreaded), Type of thread: 8 round thread or 10 round thread. Tubing is pipe used for the transportation of crude oil and natural gas from an oil or gas layer to the surface after drilling is complete. It is made to withstand the pressure generated from the extraction process. Tubing is manufactured in the same way as casing, except that an additional process known as "upsetting" is applied to thicken the pipes. The tubing production processing is similar to the process of casing production. Tubing pipes typically have diameters of 60.32 mm to 114.30 mm.
Product Name: API 5DP Drill Pipe Product Keyword: Steel Pipe, Oil & Gas Pipe, Petroleum Pipe, API Pipe, Drill Pipe, Steel Tube Brief Description: API 5DP Drill Pipe, Outside Diameter: 2-3/8¡± to 6-5/8¡±, Steel Grade: E75, X95, G105, S135, Type of Upset: IU, EU & IEU. Product Details: Standard: ANSI/API Specification 5DP, First Edition, August 2009 or ISO 11961:2008, Outside Diameter: 2-3/8¡± to 6-5/8¡± (60.32-168.28mm), Steel Grade: E75, X95, G105, S135 Upset Type: IU (Internal Upset), EU (External Upset), IEU (Internal-External Upset) Range Length: R1 (6.10-7.01metres), R2 (8.84-9.75metres), R3 (12.19-13.72metres) Drill pipes are steel tubes with threaded ends that are used to connect a drill rig¡¯s surface equipment with its drilling equipment, or bottomhole assembly, at the bottom of a well. They are used to transport drilling fluid to drill bits, and to raise, lower and rotate the bottomhole assembly along with the drill bit. Drill pipes must be manufactured to withstand severe internal and external pressure, distortion, bending and vibration. They are reusable and are not considered consumables in the process of exploring for and extracting oil and gas. Green pipes, raw steel tubes, are processed through a number of steps to make them into drill pipes. First, the walls of green pipes are thickened by a process called "upsetting" through which a pipe¡¯s exterior surface is pushed inward. Next, the pipes are threaded and receive a strength-enhancing copper plating. Nondestructive quality control inspection then takes place, after which the pipes are welded to tool joints. Pipes then undergo weld heat treatments and a weld finishing processes that removes welding stress. More tests, including hardness, pressure and non-destructive inspection are carried out on the finished drill pipes before final coating and packaging. The length of drill pipe typically is around nine meters.
Product Name: ERW Steel Pipe Product Keyword: Steel Pipe, Welded Pipe, Oil & Gas Pipe, ERW, HFW, Line Pipe, Steel Tube Brief Description: ERW Steel Pipe, Outside Diameter: 6mm-610mm (1/16"-24"), Wall Thickness: 0.3mm-22mm, Length: 0.5meter-20meter, End-Finish: Square Ends or Beveled for welding Product Details: Process: ERW(Electric Resistance Welded) HFI(High Frequency Induction) EFW(Electric Fusion Welded Tube) HFW(High-Frequency Welding) Quality Specifications: API 5L Line Pipe ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless DIN 2458 Welded Steel Pipes And Tubes EN10217 Welded Steel Tubes For Pressure Purposes. Technical Delivery Conditions. Non-Alloy Steel Tubes With Specified Room Temperature Properties BS: 1387 Steel Tubes For Use For Water, Gas, Air And Steam GB/T3091 Welded Steel Pipes for Low Pressure Liquid Delivery GB/T9711 Petroleum And Natural Gas Industries--Steel Pipe For Pipelines IS: 3589 Steel Tubes For Water And Sewage IS: 1978-1982 Steel Tubes For Use In Transportation Of Oil; Gas & Petroleum Products Steel Grade: ASTM A 53: Gr. A, Gr B, Gr C, Gr D API 5L: A, B, X42, X46, X52, X56, X60, X65 X70 GB/T3091:Q195, Q215, Q235, Q275, Q295, Q345, 08F, 08, 08AL, 08F, 10F, 10, HG5, DF08 SPHC, M8 BS:1387, EN10217:S185, S235,S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, St12, St13, St14, St33, St37, St44, ST52 Size: Outside Diameter: 6mm-610mm (1/16"-24") Wall Thickness: 0.3mm-22mm Length: 0.5meter-20meter End: Square Ends (straight cut, saw cut, and torch cut) or Beveled for welding Surface: Lightly Oiled, Hot Dip Galvanized, Electro Galvanized, Black, Bare, Varnish Coating/Anti Rust Oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) Coating Specs: ANSI/AWWA C104/A21.4 American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water ISO 21809 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems DIN 30670 Polyethylene coatings of steel pipes and fittings Packing: Plastic Plugs in both ends, Hexagonal Bundles of max. 2,000kg with several Steel Strips, Two Tags on each bundle, Wrapped in Waterproof Paper, PVC Sleeve, and Sackcloth with several Steel Strips, Plastic Caps. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. Mill Test Certificate: EN 10204/3.1B Third party inspection: SGS, BV, Lloyds etc. Usage: Used for low pressure liquid delivery, such as water, gas and oil.
Product Name: DSAW Steel Pipe Product Keyword: Steel Pipe, Welded Pipe, Oil & Gas Pipe, SAW Pipe, DSAW, LSAW, SAWL, Line Pipe, Steel Tube Brief Description: DSAW Steel Pipe, Outside Diameter: 219mm-1820mm, Wall Thickness: 5.0mm-50mm, Length: 6meter-18meter, End-Finish: Square Ends or Beveled for welding Product Details: Process: LSAW (Longitudinal Submerged Arc Welded) DSAW (Double Submerged Arc Welded) Quality Specifications: API 5L Line Pipe ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless ASTM A252 Welded and Seamless Steel Pipe Piles BS: 1387 Steel Tubes for use for Water, Gas, Air and Steam DIN 2458 Welded Steel Pipes And Tubes EN10217 Welded Steel Tubes For Pressure Purposes. Technical Delivery Conditions. Non-Alloy Steel Tubes With Specified Room Temperature Properties IS: 3589 Steel Tubes For Water And Sewage IS : 1978-1982:Steel Tubes For Use In Transportation Of Oil; Gas & Petroleum Products GB/T3091 Welded Steel Pipe For Low Pressure Liquid Delivery GB/T9711 Petroleum And Natural Gas Industries--Steel Pipe For Pipelines SY/T5037 Spiral Submerged Arc-Welded Steel Pipe For Pipelines For Low Pressure Field Fluid Service SY/T 5040 Spiral Submerged Arc-Welded Steel Pipe Piles CJ/T 3022 Spiral Submerged-Arc Welded Steel Pipe For Municipal Heat Supply Steel Grade: API 5L: A, B, X42, X46, X52, X56, X60, X65 X70 ASTM A 53: Gr. A, Gr B, Gr C, Gr. D BS:1387, EN10217:S185, S235,S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, St12, St13, St14, St33, St37, St44, ST52 GB/T 9711: L175, L210, L245, L290, L320, L360, L290, L320, L360, L390, L415, L450, L485, L555 GB/T 3091, SY/T5037, SY/T 5040,CJ/T 3022:Q195, Q215, Q235, Q275, Q295, Q345, 08F, 08, 08AL, 08F, 10F, 10, HG5, DF08 SPHC, M8 Size: Outside Diameter: 219mm-1820mm Wall Thickness: 5.0mm-50mm Length: 6meter-18meter End: Square Ends (Straight Cut, Saw Cut, And Torch Cut) Or Beveled For Welding Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) Coating Standard: ANSI/AWWA C104/A21.4 American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water ISO 21809 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems DIN 30670 Polyethylene coatings of steel pipes and fittings Packing: Plastic Plugs in both ends, Hexagonal Bundles of max. 2,000kg with several Steel Strips, Two Tags on each bundle, Wrapped in Waterproof Paper, PVC Sleeve, and Sackcloth with several Steel Strips, Plastic Caps. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. Mill Test Certificate: EN 10204/3.1B Usage: Used for structure, low pressure liquid delivery of water, gas and oil.
Product Name: API 5CT Casing Pipe Product Keyword: Steel Pipe, Oil & Gas Pipe, Petroleum Pipe, API Pipe, Casing Pipe, Steel Tube Brief Description: Outside Diameter: 5-1/2¡± to 20¡±; Steel Grade: J55, K55, N80, L80, P110; End-Finish: PE, STC, LTC, BTC; Length Range: R1/R2/R3; Manufacture Process: Seamless or Electric-Welded (Electric-Resistance or Electric-Induction Welded); Product Details: Standard: API Specification 5CT, Ninth Edition, July 2011 Outside Diameter: 5-1/2¡±-20¡± (114.30-508.00mm) Steel Grade: J55, K55, N80, L80, P110 Range Length: R1 (4.88-7.62metres), R2 (7.72-10.36metres), R3 (10.36-14.63metres); Manufacture Process: Seamless or Electric-Welded (Electric-Resistance or Electric-Induction Welded); Type of Threading: STC (Short Round Thread), LTC (Long Round Thread), BTC (Buttress Thread), or PE (Plain End, unthreaded). Casing is a large-diameter pipe that serves as the structural retainer for the walls of oil and gas wells, or wellbore. It is inserted into a well bore and cemented in place to protect both subsurface formations and the wellbore from collapsing and to allow drilling fluid to circulate and extraction to take place. The following different types of casing are used in the extraction process: Surface casing - Protects the well from contamination in shallow water and gas layers. - Supports the wellhead equipment and sustains the weight of the other layers of casing. Intermediate casing - Isolates different layers of pressure to facilitate normal circulation of drilling fluid and protect the production casing. - Intermediate casing facilitates the installation of blow-out preventers, anti-leakage devices and tailpipes in the well. Production casing (oil string) - It is the conduit through which oil and gas pass from a below surface reservoir. - It protects the well and separates fluids into various layers. For the manufacture of casing, green pipes are threaded on each end at first. The threading is then inspected and, if necessary, rethreaded to ensure that the thread accurately connects to the coupling. The casing are strengthened by surface treatment and are subject to various inspections, including drifting and hydrostatic tests before they are coated and packaged into casing.
Hot dipped galvanized square steel pipes Materials: q195-q235 O.D.: 16.0-63.5mm W.T.: 0.5-2.3mm Standard: gb, astm, api, jis, din, en, bs Hs code:7306309000 Application: low pressure liquids delivery, water pipe, heating pipe, structure and so on. In bundle or seaworthy package
Hot dipped galvanized steel pipes Materials: q195-q235 O.D.: 16.0-63.5mm W.T.: 0.5-2.3mm Standard: gb, astm, api, jis, din, en, bs Hs code:7306309000 Application: low pressure liquids delivery, water pipe, heating pipe, structure and so on. In bundle or seaworthy package
Welded steel pipes Materials: q195-q235 O.D.: 16.0-63.5mm W.T.: 0.5-2.3mm Standard: gb, astm, api, jis, din, en, bs Hs code:7306309000 Application: low pressure liquids delivery, water pipe, heating pipe, structure and so on. In bundle or seaworthy package
Hot dipped galvanized rectangular steel pipes Materials: q195-q235 O.D.: 15.0-50.0mm W.T.: 0.5-2.3mm Standard: gb, astm, api, jis, din, en, bs Hs code:7306309000 Application: low pressure liquids delivery, water pipe, heating pipe, structure and so on. In bundle or seaworthy package
Carbon seamless pipes are widest uesd.If you need .Pls send e-mail to me. O.D:17-470mm Wt:1-77mm
Carbon seamless pipes are widest uesd.If you need .Pls send e-mail to me. O.D:17-470mm Wt:1-77mm
Od 21-114mm Wt 2.5-20mm Standard gb/t8162-2008, Jisg3441-1994, en10210-1 Grade carbon structural steel, low alloy steel. Section shape round Application for making pipeline, container, equipments, pipe fittings, machinery structural. Material 10/20/45/45mn2, 27simn acc spec. Surface bare, varnish, color painted End be or plain end Type seamless Moq 2tons Supply ability 6000 tons/ month Terms of payment t/t or l/c at sight Terms of shipment within 10-20 days after receipt of deposit or L/C at sight Packaging in standard export packaging Technique hot rolled, cold rolled and cold drawn. Steel strip
As1163. 165*2.5*6.5m 114*2.0*6.5m 89*2.6*6.5m 60.3*2.3*6.5m
As1163. As1163
Steel pipe.
