Duplex s32205, s31803 is a nitrogen enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 serious stainless steel. "duplex" describes a family of stainless steel that are neither fully austenitic, like 304 stainless, nor purely ferritic phase. In the annealing condition, 2205 contains approximately 40-50% ferrite. Often referred to as the work horse grade, 2205 is the most widely used grade in the duplex stainless tube. As required
Grades 304, 304l, 316, 316l, 321, 321l etc. Size of the material ranges from 6.35mm od to 273.1mm od Box packing available, bundle packing also available
Item¡êohot rolled seamless carbon steel pipe End type: be/pe Length: 1-12 m or as client's requirement. Packing: 1.With plastic cap to protect both ends 2.Plastic bag wrapped outside the pipe 3. Bundles to be covered by polythene & strapped securely. Delivery: 5 to 50 days after receving the advancement. Packing: 1.With plastic cap to protect both ends 2.Plastic bag wrapped outside the pipe 3. Bundles to be covered by polythene & strapped securely.
Item¡êoseamless carbon steel pipes End type: be/pe Length: 1-12 m or as client's requirement. Packing: 1.With plastic cap to protect both ends 2.Plastic bag wrapped outside the pipe 3. Bundles to be covered by polythene & strapped securely. Delivery: 5 to 50 days after receving the advancement. Payment terms: t/t, d/a, l/c, etc. Trade terms: fob, cif, c&f, cfr Packing: 1.With plastic cap to protect both ends 2.Plastic bag wrapped outside the pipe 3. Bundles to be covered by polythene & strapped securely.
Item¡êogalvanized carbon steel pipe 16" End type: be/pe Length: 1-12 m or as client's requirement. Packing: 1.With plastic cap to protect both ends 2.Plastic bag wrapped outside the pipe 3. Bundles to be covered by polythene & strapped securely. Delivery: 5 to 50 days after receving the advancement. Payment terms: t/t, d/a, l/c, etc. Trade terms: fob, cif, c&f, cfr Packing: 1.With plastic cap to protect both ends 2.Plastic bag wrapped outside the pipe 3. Bundles to be covered by polythene & strapped securely.
Item¡êoapi 5l erw steel pipes End type: be/pe Length: 1-12 m or as client's requirement. Packing: 1.With plastic cap to protect both ends 2.Plastic bag wrapped outside the pipe 3. Bundles to be covered by polythene & strapped securely. Packing: 1.With plastic cap to protect both ends 2.Plastic bag wrapped outside the pipe 3. Bundles to be covered by polythene & strapped securely.
Carbon steel.
Serve: kinds of steel pipe 1. Straight-seam pipe, spiral welded pipe: Welding method: electric arc weld, erw (high frequency, low frequency), gas-welding, continuous furnace welding. 1-1 longitudinal electric resistance welded steel tubes: Material:5, q235b. Specification: od.5-508, wt. 0.5-13.0. 1-2 welded stainless steel pipes for liquid delivery: Material:1cr18ni9, 0cr18ni9(304), 00 The ones in the brackets are that of american standard. Specification: od.8-630, wt. 0.3-16 1-3 stainless welded pipe for mechanical structure: Material: 1cr18ni9, 0cr18ni9 (304), 00cr18ni10 (304l), 0cr18ni10ti (321). The ones in the brackets are that of american standard. Specification: od.8-630, wt. 0.3-16. 1-4 welded pipe for low-pressure fluid delivery: Material q215a, q215b, q235a, q235b, q295a, q295b, q345a, q345b. Specification: od: 77.8-1626, wt.4-25. 2. Seamless pipe 2-1 stainless steel seamless pipe for fluid delivery: Material£º1cr18ni9, 0cr18ni9(304), 00 The ones in the brackets are that of american standard. Specification: od. 6-426, wt. 0.25-65 2-2 seamless pipe for low temperature pipeline: Material: 16mndg, 10mndg, 09dg, 09mn2vdg, 06nimodg. Specification: od.6-426, wt. 0.25-30. 2-3 cold draw seamless square tube, rectangular tube, shaped tube: material 10, 20, 35, 45, q195, q215, q235, q295, q345, q390, Specification: size: 10-400, wt. 0.8-2.5. Length: 5.8m, 6m, 12m Can serve cut length
Hebi dingsheng pipe industry co., ltd. One of important seamless pipe mills in north of china. We mainly manufacture and export seamless pipe acc. To api 5l/astm a106/a53 gr.B ranges from 3"-34". And din/en/jis standard seamless pipes Packing in bundles or packing according to customer's request
API 5L Grade B API 5L X42, X52, X56, X60, X65, X70, X80, X100 PSL 1 and PSL 2 Weld Alternatives: ERW/HFW, DSAW/SAWL, SMLS, HSAW OD Size Range: ERW/HFW: 0.375" through 26" DSAW/SAWL: 12.75" through 144" SMLS: 0.840" through 56" HSAW: 8.625" through 144" Wall Ranges: ERW/HFW: 0.07" through 1.000" DSAW/SAWL: 0.250" through 6.000" SMLS: 0.12" through 12" HSAW: 0.250" through 1.000" Lengths: Single Random Double Random Custom (up to 300') Surface Finishes: Bare, Oiled, Mill Varnish, Galv, FBE, FBE Dual, 3LPE, 3LPP, Coal Tar, Concrete Coating and Tape Wrap. End Finishes: Beveled, Square Cut, Threaded & Coupled. Additional Services: Internal Coating container
E, x-95, g-105, s-135 Specifications: Api 5 d Weld alternatives: seamless Od size range:2.375" through 6.625" Weight range: 6.27#/ft through 27.72#/ft Lengths:Range 2range 3 Surface finishes:N/a End finishes:Internal upset, external upset, plain end upset, non upset Container
Our main products: Erw: d:21.7-457.2mm; t: 1.4-14.8mm Spirally submerged arc welded pipe: d: 219-3040mm; t: 5.0-30mm Application: for oil pipe, casing, line pipe in petroleum and natural gas, structural pipe, line pipe in mineral slurry and bittern, water and gas; and also being used for chemical industry, electric power engineering, building structure and pile driving.
Our main products: Erw: d:21.7-457.2mm; t: 1.4-14.8mm Spirally submerged arc welded pipe: d: 219-3040mm; t: 5.0-30mm Application: for oil pipe, casing, line pipe in petroleum and natural gas, structural pipe, line pipe in mineral slurry and bittern, water and gas; and also being used for chemical industry, electric power engineering, building structure and pile driving.
SS/CS steel seamless/welded pipes The main materials are stainless steel (304/304L/316/316L and forged ), carbon steel, and cast iron , etc. SS/CS steel seamless/welded pipes The main materials are stainless steel (304/304L/316/316L and forged ), carbon steel, and cast iron , etc.
Type:elbows/reducer/tee/cap Size: from 1/2" to 48" Wall thickness: sch20-sch160, xxs Standard: iso, ansi, jis, din, gb Material: carbon steel, alloy steel, stainless steel carbon steel pipe fittings Applications:oil, gas, chemical industry, water conservancy, electric power, boiler, machinery, metallurgy, sanitary construction etc. Productivity :50000t/y Plywood cases , wooden pallet plastic bag or as per customers requirement
Pipe fitting elbow Our elbow fittings are available in different specifications are manufactured with quality raw materials to meet the challenges of many kinds. These fittings have been serving industries like chemical, oil & gas, pharmaceutical & power industries. We have many options in the elbow fittings category listed as below:- We are one of the best & leading manufacturer & supplier of bulk head elbows, which are used in many big industries and provide required function. These are procured out of premium grade materials to make sure the functionality of the parts with perfection. We offer these bulk head elbows at affordable costs to our customers. Free fumigation plywood case or plywood pallet.
The specification of our products are 219-2020mm, thickness is 1-14mm, length is 6-12m, and we can produce as your requirements. Our products mainly used in water supply engineering, petrochemical industry , chemical industry, electric power industry , agricultural irrigation, urban construction, and it is one of 20 key product development in our country . We use cif or cfr, and we can guarantee that our products are of high quality and reasionable price, and we can make delivery as soon as possible! As your request
Specification is 13*13-600*600mm, thickness is 0.6-30mm, length is 6-12m, and we can produce as your request.They usually be used in the projects of construction, machinery manufacturing , steel construction, it is also used in the shipbuilding, solar power stents, steel structure engineering, power engineering, power plants, agricultural and chemical machinery, glass curtain wall, automobile chassis, airport, the boiler's construction, highway fence, building structure, pressure vessel, oil storage tanks, bridges, power station equipment, lifting transportation machinery and other high load of welded structure, etc. We use cif or cfr, and we can guarantee that our products are of high quality and reasionable price, and we can make delivery as soon as possible! As your request
The specification is 10*20mm-200*400mm, thickness is 0.5-25mm.Main material is q235, q235b, q345, 16mn.It is used in the projects of construction, machinery manufacturing, steel construction, and also used in the aspect of shipbuilding, solar power stents, steel structure engineering, power engineering, power plants, agricultural and chemical machinery, glass curtain wall, automobile chassis, airport, etc.We could produce as your request!we use cif or cfr, and we can guarantee that our products are of high quality and reasionable price, and we can make delivery as soon as possible. As your request
Od:21.3-219.1mm, thickness:2.8-20mm, length:6-12m, main material is q235, q345, 16mn.And we can produce as your request. All the production process are made under the iso9001:2000strictly, our company is specializing in the galvanized pipes, welded pipes and other pipes. We can also process steel pipes according to our customers' orders. Our products are mainly applied to many fields such as construction, furniture, scaffolds, petroleum, and coal gas, natural gas, heating power stations, high-pressure hydropower stations and more. The quality of our products is trustworthy. We use cif or cfr, and we can guarantee that our products are of high quality and reasionable price, and we can make delivery as soon as possible! As your request
