Webforge gratings are manufactured using a high voltage resistance welder, which is computer controlled. Cross rods (square twisted or round) are set horizontally on evenly spaced flat bars automatically and welded using high electrical current of 1600kva and hydraulic pressure of 1000kn to produce forge-welded grating panels of considerable rigidity and strength capable of supporting high loading
Stainless steel anchors 20kg
Steel band Steel brand: q235, q195, q195l, q195ld, 08al, spcc Thickness: 0.18mm-3.0mm Width: 0-780mm Width tolerance: different as per different width Thickness tolerance: different as per different thickness Hardness of steel coil: >95hv (softened and hardened we can offer) Weight: 3-9mt/c (or according to the customerí»s requirement) Surface: general, bright, dull and mirror finish, oiled or unoiled Packing: standard exporting packing with edge protector, steel hoop and seals, or as per customer's requirements Steel band Steel brand: q235, q195, q195l, q195ld, 08al, spcc Thickness: 0.18mm-3.0mm Width: 0-780mm Width tolerance: different as per different width Thickness tolerance: different as per different thickness Hardness of steel coil: >95hv (softened and hardened we can offer) Weight: 3-9mt/c (or according to the customerí»s requirement) Surface: general, bright, dull and mirror finish, oiled or unoiled Packing: standard exporting packing with edge protector, steel hoop and seals, or as per customer's requirements
Rail:35x35, 38x38, 45x45, 50x50 Picket:16x16, 19x19, 25x25 Panel size:2400, 3000 Height:1200, 1500, 1800, 2000, 2400 Pallet
The steel shot have proper hardness degree and evenly distributed granularity ,it applied in shot blasting surface cleaning of raw iron ,tin ,carbon steel and other extensively! 25kgs in one plastic bag ,40bags in one pallet ,or in compliance with your request
The steel grit produced with special and unique techique has particle-size uniformity ,stable performance ,it classify three series of it :GP GL GH,and the GH type have the higher hardness degree than others. 25kgs in one plastic bag ,40bags in one pallet.or in compliance with your request
Section steel A. Equal angle and unequal angle, specification: 25x25x3 30x30x3.4 40x40x4 50x50x5 63x63x6 100x63x10 125x80x12 200x125x18 B. I-beam :12-560mm C. Channel steel:8-450mm D. Various h-beam E. Steel billet :120, 150, 200, 300, 400 F. Light rail, heavy rail, floating rail
We can supply steel cut wire shot with sae standard and reasonable rates. Welcome your enquires and comments. Sc1.0mm sc1.2mm sc1.5mm Chemical composition C : 0.45-0.75 Si : 0.10-0.30 Mn : 0.40-1.20 S : < 0.04 P : < 0.04 Hardness( hrc ): 36-52 Intensity of stretching resistance( mpa ): 1660-2200 Metallographical : tempered martensite Density (g / cm3 ): 7.8 25kg/bag
Usage: applied in shot blasting surface cleaning of raw iron, tin, carbon steel and other casting extensively! Main chemistry: c 0.85-1.20% si 0.40-1.50% mn 0.60-1.20% Cr 0.09-1.20% mo 0.15-0.25% Density: 7.4g/ cucm Size: 0.3mm- 2.5mm we can customize other size product Hardness:40-50hrc Package:25kg/bag, 40bags/ton.Also, we do special packing requirement such as iron drum and plastic bags.
Type: Round bore; Dual bore; Racetrack bore; Dogbone bore Tri-bore, square bore Material: Pyrex 33 Main purpose: Collimator, isolator Can produce according to customer's drawing OD:1.8/1.01mm; ID:0.127mm,L:7mm
Usage: Applied in shot blasting surface cleaning of raw Iron, tin, carbon steel and other casting extensively! Main chemistry: C 0.85-1.20% Si 0.40-1.50% Mn 0.60-1.20% Cr 0.09-1.20% Mo 0.15-0.25% Density: 7.4g/ cucm Size: 0.3mm- 2.5mm we can customize other size product Hardness:40-50HRC Package:25kg/bag, 40bags/ton.Also, we do special packing requirement such as Iron Drum and Plastic bags.
Usage: applied in shot blasting surface cleaning of raw iron, tin, carbon steel and other casting extensively! Chemical composition: C: 0.70-1.20%, mn: 0.60-1.20% , si: 0.40-1.20%, P: 0.05% max, S: 0.05% max Hardness: Gp: 42-50hrc Gl: 52-56hrc Gh: 56-60hrc Standard: sae j827 Size: 0.3mm- 2.5mm we can customize other size product Hardness:42-60hrc Package:25kg/bag, 40bags/ton.Also, we do special packing requirement such as iron drum and plastic bags.
Usage: applied in shot blasting surface cleaning of raw iron, tin, carbon steel and other casting extensively! Chemical composition: C: 0.70-1.20%, mn: 0.60-1.20% , si: 0.40-1.20%, P: 0.05% max, S: 0.05% max Hardness: Gp: 42-50hrc Gl: 52-56hrc Gh: 56-60hrc Standard: sae j827 Size: 0.3mm- 2.5mm we can customize other size product Hardness:42-60hrc )package:25kg/bag, 40bags/ton.Also, we do special packing requirement such as iron drum and plastic bags.
Usage: applied in shot blasting surface cleaning of raw iron, tin, carbon steel and other casting extensively! Chemical composition: C: 0.70-1.20%, mn: 0.60-1.20% , si: 0.40-1.20%, P: 0.05% max, S: 0.05% max Hardness: Gp: 42-50hrc Gl: 52-56hrc Gh: 56-60hrc Standard: sae j827 Size: 0.3mm- 2.5mm we can customize other size product Hardness:42-60hrc )package:25kg/bag, 40bags/ton.Also, we do special packing requirement such as iron drum and plastic bags.
Post tensioning accessory
Used for manufacturing automotive cmponents ,machine tool accessories, dies and moulds. Standard lot size
Steel axle
Heavy metal steel Isri 200-206 300mt to 2500mt
Steel rail
Steel grating
