316L stainless steel coil is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches. Name 316L Stainless Steel Coil Standard JIS, AiSi, ASTM, GB, DIN, EN Material 316L Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc. Width 100mm-2500mm or as required Thickness 0.1mm-4mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel strip is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery
Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields. Name Hastelloy C-276 Stainless Steel Coil Standard JIS, AISI, ASTM, GB, DIN, EN, BS Material Hastelloy C-276 Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc. Width 100mm-2500mm or as required Thickness 0.1mm-12mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery
INCOLOY Alloy 825 Stainless steel coil
316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections. 316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). 316H, with its higher carbon content has application at elevated temperatures, as does stabilised grade 316Ti. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures
904L stainless steel coil (super austenitic stainless steel) is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is specially designed for environments with severe corrosion conditions. It has high chromium content and sufficient nickel content. The addition of copper makes it have strong acid resistance, especially high resistance to chloride interstitial corrosion and stress corrosion cracking. It is not easy to appear corrosion spots and cracks. Its pitting resistance is slightly better than that of other steels. It has good processability and weldability, and can be used for pressure vessels. Name 904L Stainless Steel Coil Standard JIS, AiSi, ASTM, GB, DIN, EN Material 904L Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc. Width 100mm-2500mm or as required Thickness 0.1mm-4mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
430 stainless steel coil is used for building decoration, fuel burner parts, household appliances and household appliances. 430F is a steel with free cutting property added to 430 steel, mainly used for automatic lathes, bolts and nuts. 430LX adds Ti or Nb to 430 steel to reduce the content of C, which improves the processability and welding performance. It is mainly used in hot water tanks, hot water supply systems, sanitary appliances, household durable appliances, bicycle flywheels, etc. Name 430 Stainless Steel Coil Standard JIS, AiSi, ASTM, GB, DIN, EN Material 430 Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc. Width 100mm-2500mm or as required Thickness 0.1mm-4mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.
201 stainless steel coil is mainly used for decorative tubes, industrial tubes and some shallow stretched products. Name 201 Stainless Steel Coil Standard JIS, AiSi, ASTM, GB, DIN, EN Material 201 Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc. Width 100mm-2500mm or as required Thickness 0.1mm-4mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
2507 stainless steel coil is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment. Name 2507 Stainless Steel Coil Standard JIS, AISI, ASTM, GB, DIN, EN, BS Material 2507 Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc. Width 100mm-2500mm or as required Thickness 0.1mm-12mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Use of 2205 stainless steel coil: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment. Name 2205 Stainless Steel Coil Standard JIS, AISI, ASTM, GB, DIN, EN, BS Material 2205 Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc. Width 100mm-2500mm or as required Thickness 0.1mm-12mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.
Name Stainless Steel Coil Standard JIS, AISI, ASTM, GB, DIN, EN, BS Material 201, 301 304L, 309S, 316L 310S 321 410, 430 2205 , 2507 , 904L , INCOLOY Alloy , HASTELLOY MONEL etc. Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirementg,etc. Width 100mm-2500mm or as required Thickness 0.1mm-12mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Product introduction Stainless steel 304 and stainless steel 304L are also known as 1.4301 and 1.4307 respectively. 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of 304 being 18% chromium and 8% nickel. 304 stainless steel is an austenitic grade that can be severely deep drawn. This property has resulted in 304 being the dominant grade used in applications like sinks and saucepans. 304L is the low carbon version of 304. It is used in heavy gauge components for improved weldability. 304H, a high carbon content variant, is also available for use at high temperatures Possible Alternative Grades Grade Why it might be chosen instead of 304 301L A higher work hardening rate grade is required for certain roll formed or stretch formed components. 302HQ Lower work hardening rate is needed for cold forging of screws, bolts and rivets. 303 Higher machinability needed, and the lower corrosion resistance, formability and weldability are acceptable. 316 Higher resistance to pitting and crevice corrosion is required, in chloride environments 321 Better resistance to temperatures of around 600-900 C is needed 321 has higher hot strength. 3CR12 A lower cost is required, and the reduced corrosion resistance and resulting discolouration are acceptable. 430 A lower cost is required, and the reduced corrosion resistance and fabrication characteristics are acceptable. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
310S stainless steel coil is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310s stainless steel plate has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200, and it can work continuously at 1100. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts. Name 310S Stainless Steel Coil Standard JIS, AiSi, ASTM, GB, DIN, EN Material 310S Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc. Width 100mm-2500mm or as required Thickness 0.1mm-4mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery
About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc. Name MONEL400 Stainless Steel Coil Standard JIS, AISI, ASTM, GB, DIN, EN, BS Material MONEL400 Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc. Width 100mm-2500mm or as required Thickness 0.1mm-12mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
304L stainless steel coil is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, nuclear power, aerospace, military and other industries. Name 304L Stainless Steel Coil Standard JIS, AiSi, ASTM, GB, DIN, EN Material 304L Surface Treatment BA/2B/NO.1/NO.4/4K/HL/8K/EMBOSSED or according to customer requirements,etc. Width 100mm-2500mm or as required Thickness 0.1mm-4mm or as required Length As customer's request Inspection Fully accept all the third party to test before shipment. Packing Standard Export Seaworthy Package.Suit for all kinds of transport,or as required. Payment Terms L/C, T/T ETC. Stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery. Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
Decoration field: 304 stainless steel can be used in decoration field. 304 stainless steel has been widely used in the decoration industry due to its high tensile strength, good internal wall finish and excellent wear resistance. Just like our common stainless steel stair guardrails, handrails, stainless steel anti-theft windows, stainless steel doors, stainless steel tables and chairs, they are all made of 304 stainless steel decorative tubes. In life, the bathroom is wet and the kitchen is full of lampblack, so 304 stainless steel can be used in these two places. Industrial field: 304 stainless steel is used in the industrial field, mainly for industrial transmission pipelines and mechanical structural parts such as petroleum, chemical, medical, food, light industry, mechanical instruments, etc. Generally, the working pressure of water supply system in high-rise buildings is high, while the tensile strength of 304 stainless steel is strong, and the possibility of water leakage under external force is very small. It is an important material of water supply system in high-rise buildings Product name Color Coated 304 Stainless steel sheet Grade 304 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Hindalco's cold rolled coils are precision-finished to match international standards. They have good shape, high tolerance, versatility and blemish-free surfaces. They are used in commercial and general engineering applications such as bus bodies, cladding and fan blades. The company meets the demands of its ever-growing clientele with continuous upgrades and process improvement. Thickness : 0.16 mm to 4 mm Width : 50 mm to 1600 mm Alloys : 1050/1100/1070/1200/3103/3105/3003/5052/5005/5754/5083/8011
Our company is mainly engaged in the production and trade of metal products. The main products are: carbon steel (plate, coil, tube, etc.), stainless steel (plate, tube, coil, wire, rod, strip, etc.), galvanized steel strip, PPGI , PPGL, welcome to leave a message for consultation.
premium steel products, including steel coils, erw tubes, round bars, t bars, angle bars, rebars, and other steel materials .shipping, packaging, and warehousing for phased deliveries.
Steel plate, steel coil, ipe, hpe, steel pipe..
Superior products are stainless steel series, carbon steel series, galvanized steel series, alloy steel series, ppgi, ppgl, rebar, wire etc.Export, manufactured and distribution
