COLOUR COATED PRODUCTS Colour coating of coils means continuous applying of paint to flat steel strip (rolled in a coil shape) with polyurethane rolls using high-tech automation. Colour coated strip is continuously produced on the line as described in the below steps. Coils are opened, top and back surfaces of the strip are cleaned (by applying a special chemical agent and rinsing it off), chromated (an operation to increase the corrosion resistance and to enhance the paint adherence). After that the strip passes through the oven, and the primer is applied to it (paint is applied only to top surface, while back surface is covered with high adhesive polyurethane back coating paint). Thereafter, the strip passes through another oven. If colour coating is requested over the primer on both sides, the paint is applied as the last layer and the strip is dried in the furnace. Depending on the customers request, protecting film may be applied, and the colour coated strip is rolled in a coil and packed.
Having passed Hot Strip Mill and Continuous Pickling Line, after rolling on Cold Reversing Mill (CRM), full hard products with surface quality and thickness (0.25-2.00 mm) suitable for further processing on HDGL are produced. Zinc coating is applied by continuous annealing followed by immerging of the strip into zinc pot on Hot Dip Galvanizing Line (HDGL) To protect the surface of galvanized products from corrosion, chemical passivation and protective oil may be applied. Products with thickness ranging between 0.25-3.00 mm and width ranging between 800-1530 mm may be produced on Hot Dip Galvanizing Line.
S S SHEET , S.S. BARS , S.S. COIL, S.S. PLATE
Standard: AISI, ASTM, BS, DIN, GB, JIS Grade: Q235Q345 Place of Origin: Hebei, China Model Number: U02 Shape: U Channel Application: Construction and Multipurpose Perforated Or Not: Not Perforated Tolerance: �±5% Processing Service: Bending, WELDING, PUNCHING, Decoiling, Cutting Product name: U channel Surface treatment: Hot Dip Galvanised or none Material: Q235/Q345/SS400/ST37-2/ST52/Q420/Q460/S235JR/S275JR/S355JR Payment terms: T/T Technique: Hot Rolled Steel Length: 1-12m Usage: Construction Structure Key words: Hot Dipped Galvanized Channel Iron Side length Size: 20-800mm MOQ: 1 Ton
We are selling color coated secondary steel plates. This secondary steel plate is colored and coated because it comes from home appliance factory. So it's suitable for making small products such as small cases. If you contact me, I will send you the picture. Thanks, Origin : South Korea Departure : South Korea Payment terms : L/C Lead time : 2 ~ 4 weeks Price : discuss MOQ : 20ft - 1 Container (18~20 MT)
Thickness: from 0.1 mm to 2.0mm Width: from 800mm to 2000 mm
ppgiï¼?ppgl
Steel Strapping,black painted or blue tempered and waxed or without waxed,size: 0.016" *1/2 " / 5/8 " (0.40mm*12.7mm/ 16mm) 0.020" *1/2 " / 5/8 " / 3/4 " (0.50mm*12.7mm/ 16mm/ 19mm) 0.024" *1/2 " / 5/8 " / 3/4 " (0.60mm*12.7mm/ 16mm/ 19mm) 0.028" *3/4 " / 1 " / 5/4 " (0.70mm*19mm/ 25.4mm/ 32mm) 0.031" *3/4 " /1 " / 5/4 " (0.80mm*19mm/ 25.4mm/ 32mm) 0.035" *3/4 " / 1 " / 5/4 " (0.90mm*19mm/ 25.4mm/ 32mm) 0.039" *3/4 " / 1 " / 5/4 " (1.0mm*19mm/ 25.4mm/ 32mm) Elongation:3-5% for regular duty and 5-8% for high duty and 8-12% for super high duty; Tensile strength:regular duty,high duty or super high duty; Winding: ribbon or oscillated wound; Why choose us? 1.the coil weight tolerance of our mini roll steel strappings can be +/-0.5kg; 2.we can produce jumbo roll(coil weight is 150kg-400kg); 3.our super high duty steel strappings, tensile strength is min 950Mpa, elongation min 8%.
Cold Rolled Coils (CRC) Quality: Secondary Soft Origin: Europe (Belgium) POL: Antwerp Port Selection: Allowed Quantity: 1900+ MT For, Malaysia, Vietnam, Taiwan, Sri Lanka, Bangladesh, India, Any Asian Country If you are interested on kindly contact us,
HRC: Soft Quality Origin: Europe POL: Antwerp Port Mill: Arcelor Selection: Allowed Quantity: 1400+ MT For, Malaysia, Vietnam, Taiwan, Sri Lanka, Bangladesh & India If you are interested on kindly contact us, Md. Akib Javed Sales Manager, Metro Premium Steel Sdn Bhd Phone/WhatsApp: 60143999854 Email: javed@metropremiums.com
Product Description We can supply all kinds of condenser coated bundy tube, copper coated tube, codenser pipe, bundy tube, steel pipe 1.product name: copper coated bundy steel tube 2.standard and Materia:ASTM A254� BHG2 low carbon steel 3.Size:OD 4mm --12.7mm, W.T: 0.5mm--1.0mm 4.Zinc coating thickness: 6um--12um 5. Treatment: copper coated 6. Product application: refrigeration,auto brake system 7.Surface outlook:� Both ends of tube without rag, corner processing, smooth, absence of istortion. 8. Packing:� plastic bag inside, iron frame fixed 9.Certification: ISO9001, ROHS Chemical Composition C Si Mn P S â?¤0.08% â?¤0.03% â?¤0.03% â?¤0.02% â?¤0.02% � Chemical Composition Machnical Properties � Tensile Strength � â?¥290Mpa � Yield Strength � â?¥180Mpa � Elongation � â?¥20% � Salt spray test � 24hours � Inside Surface Cleanliness � â?¤20g/m2 The tolerance allowed for the OD of the steel tube: OD The tolerance allowed (based on no coating) < 4.76 �±0.05mm 4.76 ~ 8.00 �±0.08mm > 8.00 ~ 12.00 �±0.10mm � The tolerance allowed for the thickness of the steel tube: Thickness The tolerance allowed (based on no coating) 0.50 �±0.07mm 0.70 �±0.08mm 1.00 �±0.09mm
Specification of Hong Ky High Speed Steel Coil Slitting line General specification: 1. Material Thickness: 0.3 mm to 3.2 mm 2. Input Coil Width: 600 mm to 1350 mm 3. Coil outer diameter: �¦ 1000 mm to �¦ 1700 mm 4. Coil inner diameter: �¦508 or �¦610mm 5.Coil weight: max. 20 tons 6.Speed: 80 m / min ~ 200 m / min 7.Total machine weight: 80 tons Advantages of Hong Ky High Speed Steel Coil Slitting Line: Thanks to the double slitting system, quick adjusting the clearance of knife blade has achieved.The design brings customer efficiency, long life operation, and safety for user. 1. Double Slitting System: - Thanks to the double slitting system, quick adjusting the clearance of knife blade has achieved. - It is efficient because a knife blade set can be done outside the line. - It has become possible to experimentally cut outside the line before real operation in order to check the accuracy. - Since all hydraulic piping and electrical wiring are buried underground, the working ground is clean and easy for operator to work. 2. Gear Box: - Hong Ky high speed steel coil slitting line has 3 gear boxes (Reducer). All gear boxes are designed and manufactured by Hong Ky, then the design became compact and efficient. 3. Scrap disposal: - It is unique design. It is automatic. - After winding the scrap, the scrap is automatically dropped on the conveyor, and the scrap is conveyed to the scrap box. 4. Latest advanced mandrel shaft of Tension Reel: - Hong Ky has adopted one of the advanced and latest Mandrel Shafts Mechanism. The mandrel shaft is designed to minimize the amount of bending when pinching the edge of the metal sheet. 5. Line Design: - Line design is a crystal of technology that the steel industry has built over several decades. - It is efficiency, long life, and strong design. - Hong Ky high speed steel coil slitting line is classified roughly into 12 main parts. 6. Product liability: - The safety measurement is taken into consideration in order to meet the product liability law. - Ground hole are fully covered to increase safety for operator. - The moving parts are covered as much as possible. 7. User-friendly design: - Hong Ky high speed steel coil slitting line is easy to handle and taken every safety measures.
CT coils available for all single & 3 phase Energy meters CT 5/30AMPERE CT 10/60AMPERE CT 10/80 AMPERE CT 100 AMPERE
GA CIRCLE Thickness : 0.50 mm Dia Met : 512 mm
PRIME ELECTRO GALVANIZED COILS Thickness : 1.00 mm to 3.00 mm Width : 914 mm to 1524 mm
Our company has available for sale a stock of 4.500 mt of steel and cast iron used rolling mills rolls . Origin Romania Different dimensions, weights and chemistry. Pictures, list and details on request.
Product Name:Uster Coil Brand Name:Schlafhorst Packing Type:Standard export packing/Carton Payment Terms: T/T in advance. Delivery Time: 2-5 days.
Product Name:Uster Coil Brand Name:Schlafhorst Packing Type:Standard export packing/Carton Payment Terms: T/T in advance. Delivery Time: 2-5 days.
Product Name:Uster Coil Brand Name:Schlafhorst Packing Type:Standard export packing/Carton Payment Terms: T/T in advance. Delivery Time: 2-5 days.
PPGI Size:0.35*1000mm,0.35*1200mm Painting:5+15/5-7um PE paint Color:as color code
