SV Trade is supply & exports high quality products like galvanized sheet coils that are supplied in the form of stretch leveled and skin passed in different grades like deep drawing and ordinary.
We take utmost care while producing the products as they are specifically developed in accordance to various international and domestic quality standards like Indian, ASTM, JIS, Euro, Ethiopian etc. Through our world class infrastructure we have increased our growth. This has further resulted in meeting the global demands of our galvanized sheet coils. Hence we cater our products to different ? different countries.
The array of our Hot Dipped Galvanized Coils / plain sheets has the following features:
Thickness 0.11mm to 2.00mm
Width: 19mm to 1250mm
Zinc Coating 80 to 275 GSM
Coil weight 5 MT max.
Coil ID 508
SV Trade is supply & exports high quality products like galvanized sheet coils that are supplied in the form of stretch leveled and skin passed in different grades like deep drawing and ordinary.
We take utmost care while producing the products as they are specifically developed in accordance to various international and domestic quality standards like Indian, ASTM, JIS, Euro, Ethiopian etc. Through our world class infrastructure we have increased our growth. This has further resulted in meeting the global demands of our galvanized sheet coils. Hence we cater our products to different countries.
The array of our Hot Dipped Galvanized Coils / plain sheets has the following features:
Thickness 0.11mm to 2.00mm
Width: 19mm to 1250mm
Zinc Coating 80 to 275 GSM
Coil weight 5 MT max.
Coil ID 508
SV Trade is engaged in exporting Cold Rolled Coils/Sheets (CR sheets/coils) that range from 0.10 mm to 2.50 mm in width that is up to 1250 mm. These are available in 'D', 'DD', 'EDD' series.
Our quality products are applicable in a host of industries like automobile, cycle, and white goods. We give utmost importance to the requirements of the customers and develop products that meet their specifications in hard, semi-hard and soft quality.
We source the materials from certified producers resulting in a range of CR coils that is par excellence. Such high standards of quality have won us a reputed clientele
We can export prime prepainted steel coil from China.
Specification : 0.15-2.0mm, width: 914mm/1000mm/1219/1200mm/1250mm. Top side color: depend on RAL No. Back color: RAL 9003. Coat: 15+7mu. Zinc: 60-275g. Message: zssteel(at)163(dot)com
CONTENTS
PREPAINTED GALVANIZED PPGI
PREPAINTED GALVALUME PPGL
BASE METAL
GALVANIZED
GALVALUME / ALUZINC
STANDARDS
JIS G 3312-CGCC, CGC340-570, (G550),
JIS G 3312-CGLCC, CGLC340-570, (G550),
ASTM A -755M CS-B, SS255-SS550
ASTM A -755M CS-B, SS255-SS550
THICKNESS
0.14~2.0 mm
0.14~2.0 mm
Width
750~1500 mm
750~1500 mm
Coil ID
508/610 mm
508/610 mm
Substrate
Soft, Medium, Hard
Soft, Medium, Hard
Coating Mass
Z 40-275 (g/m2)
AZ 40-150 (g/m2)
Paint Systems
Primers: Epoxy, PU
Primers: Epoxy, PU
Top Coating:
Top Coating:
Polyester (RMP/PE)
Polyester (RMP/PE)
Silicon Modified Polyester (SMP)
Silicon Modified Polyester (SMP)
Poly Vinyl Di Flouride (PVDF)
Poly Vinyl Di Flouride (PVDF)
Back Coating: Epoxy, Polyester, PU
Back Coating: Epoxy, Polyester, PU
Coating
20 50 Microns
20 50 Microns
Colours
As Per RAL Chart/Customer requirements.
As Per RAL Chart/Customer requirements.
Surface Finishes
Glossy and Matte
Glossy and Matte
Cut to length
200mm-5000mm
200mm-5000mm
Capacity
1,500,000.00 Ton / year
1,500,000.00 Ton / year
Packing
Sea Worthy Export Packaging
Sea Worthy Export Packaging
Loading Port
Tianjin Port/Jingtang Port/Shanghai Port
Tianjin Port/Jingtang Port/Shanghai Port
Shandong Wofeng New Material Co., Ltd. is manufacturing printed PPGI/PPGL since year 2008. We are mainly engaged in the sales and processing of color coated steel/aluminium, printed steel/aluminium, PVC laminated steel/aluminium coils and sheets.
We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow:
To retain the steel intact with its full initial strength.
To provide the surface a more pleasing appearance.
To increase the life of any suitable organic finishing system applied over it.
To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere.
Features
Uniform zinc coating in the range of 60-600 GSM
Spangles: Zero / regular / minimized / suppressed
Surface finish: Normal spangle, large spangle, small spangle, matte surface
With and without tension leveling
Passivation: Chromated (Hexavalent / Trivalent)
Oiling: 100-1,000 GSM
Winding: Controlled / staggered (+/- 5 to +/-15mm)
Coil id: 508 / 610 mm
Elongation: 16-33%.
Dimensions
Thickness: 0.18 - 3.2 mm
Width: 800 - 1,500 mm
Length: Up to 2,500 mm
Grades & Standards
CQ, DQ, DDQ, EDDQ, HSLA
ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS
Commercial Steel (CS Types A, B, and C)
Forming Steel (FS Types A and B)
Deep Drawing Steel (DDS Types A and C)
Extra Deep Drawing Steel (EDDS)
Structural Steel (SS) further designated by Grades (33,37,40,50,80)
High Strength Low Alloy Steel (HSLAS)
Supply condition
Coil / Slits/ Sheet form
Dimensions
Thickness: 0.15-3.2 mm
Width: 900 - 1,500 mm
Length: Up to 2,500 mm
Oiling: 100-1,000 GSM
Winding: Controlled / staggered (+/- 5 to +/-15mm)
Coil id: 508 / 610 mm
Elongation: 16-33%.
Grades & Standards
CQ, DQ, DDQ, EDDQ, HSLA
ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS
Commercial Steel (CS Types A, B, and C)
Forming Steel (FS Types A and B)
Deep Drawing Steel (DDS Types A and C)
Extra Deep Drawing Steel (EDDS)
Structural Steel (SS) â?? further designated by Grades (33,37,40,50,80)
High Strength Low Alloy Steel (HSLAS)
Supply condition
Coil / Slits/ Sheet form
Dimensions
Thickness: 0.4-3.2mm (CRCA); 0.15-1.9mm (CRFH)
Width: 800-1,625mm
Material - Mild Carbon Steel
Length - Can be cut to sheets according to requirement
Max. Weight - 20MT per coil
Grades
Extra Deep Drawing steels (EDD, IF)
IFHS (350, 400, 440)
Bake hardening steel (BH180,220)
HSLA (320, 340, 440)
Semi-processed electrical steels
Steels for enameling
CORTEN
ASTM: A 1008: DS type A & B, DDS, EDDS, EDDS+
IS: IS 513: D, DD, EDD
DIN: DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3
EN: EN 10268: HSLA 340, HSLA 420,EN 10130: DC 01, 03, 04, 05/06
JIS: G 3141: SPCD, SPCE, SPEN, SPRC 340/ 390,SPFC 340/ 390/ 440
Supply Condition:
Coil / Slit / Sheet form
Surface textures
a. Smooth (plating applications) - suitable for electroplated
articles and also for re-rolling when a matt texture is undesirable. A maximum surface roughness
of 0,5 micrometers centre line average (CLA) is aimed for. Typical applications are car bumpers,
door locks and other electroplated articles.
b. Light matt (drawing and pressing applications)- surface roughness of 0.60 -
1,25 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for.
Typical applications are automobile panels.
c. Medium matt (drawing and pressing applications)- A surface roughness of 0,8 - 1,6 micrometers centre line average (CLA) and 100 peaks per inch
(PPI) minimum is aimed for. Typical applications are drum bodies and ends.
5939 Steel Coils Suppliers
Short on time? Let Steel Coils sellers contact you.
