Galvanised Coils and Slits prime and second choice
We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow: To retain the steel intact with its full initial strength. To provide the surface a more pleasing appearance. To increase the life of any suitable organic finishing system applied over it. To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere. Features Uniform zinc coating in the range of 60-600 GSM Spangles: Zero / regular / minimized / suppressed Surface finish: Normal spangle, large spangle, small spangle, matte surface With and without tension leveling Passivation: Chromated (Hexavalent / Trivalent) Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Dimensions Thickness: 0.18 - 3.2 mm Width: 800 - 1,500 mm Length: Up to 2,500 mm Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions Thickness: 0.15-3.2 mm Width: 900 - 1,500 mm Length: Up to 2,500 mm Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) â?? further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions PPGI and PPGL Type: Continuous Coil Color Coating Thickness (MM):0.18 TO 2.00 MM Width (MM):900 TO 1450 MM GSM: 70-250 Gsm Paint Coating thickness: 15-40microns Surface Finishes: Smooth, matt, high gloss, textures, printed Output Coil ID (MM):508mm / 610mm Output Coil OD (MM):1200 mm Output Coil Weight (MT):3-7 MT Type of Painting: EXPOXY,RMP (Regular Modified Polyester), SMP (Silicon Modified Polyester) HDP (High Durable Polyester), SDP (super Durable Polyester) PVDF (Poly Vinylidene Fluoride), PLASTISOL, PUPA/ARS, Anti-Bacterial, Wrinkle Finish /Anti Skidding Self-Cleaning / Anti Dust. Type of Material: HOT DIPPED â?? GALVANIZED steel (ZINC : 60-350 GSM) HOT DIPPED -ALU ZINC (ALUZINC 30-150) Grade:LFQ,SS,SGCC,CS,DX,HX Paint Coating:4-8 Microns primer + 15 TO 35 microns top Coat ( Four Coat System also available â?? Top & Bottom Side with Primer + Paint ) Supply conditions Coil / Sheet/ Slit / corrugated sheets / plain sheets / trapezoidal profiles Applications Construction and infrastructure: Industrial roofing and cladding, cold storage and warehouses, airports, atriums in malls, showrooms, false ceilings, lighting fixture White goods: Refrigerators, display freezers, washing machines, air conditioner wraps Automotive: Bus bodies, railway coaches, luxury coaches
Dimensions Thickness: 0.4-3.2mm (CRCA); 0.15-1.9mm (CRFH) Width: 800-1,625mm Material - Mild Carbon Steel Length - Can be cut to sheets according to requirement Max. Weight - 20MT per coil Grades Extra Deep Drawing steels (EDD, IF) IFHS (350, 400, 440) Bake hardening steel (BH180,220) HSLA (320, 340, 440) Semi-processed electrical steels Steels for enameling CORTEN ASTM: A 1008: DS type A & B, DDS, EDDS, EDDS+ IS: IS 513: D, DD, EDD DIN: DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 EN: EN 10268: HSLA 340, HSLA 420,EN 10130: DC 01, 03, 04, 05/06 JIS: G 3141: SPCD, SPCE, SPEN, SPRC 340/ 390,SPFC 340/ 390/ 440 Supply Condition: Coil / Slit / Sheet form Surface textures a. Smooth (plating applications) - suitable for electroplated articles and also for re-rolling when a matt texture is undesirable. A maximum surface roughness of 0,5 micrometers centre line average (CLA) is aimed for. Typical applications are car bumpers, door locks and other electroplated articles. b. Light matt (drawing and pressing applications)- surface roughness of 0.60 - 1,25 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are automobile panels. c. Medium matt (drawing and pressing applications)- A surface roughness of 0,8 - 1,6 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are drum bodies and ends.
Dimensions Thickness: 1.6 -25mm Width: 900-2,100mm Material - Mild Carbon Steel Max. Weight â?? 22 â?? 25 MT Grades Drawing quality steel: D / DD / EDD Cold rolling grades: IF (Interstitial Free) and High Strength IF Steels Medium carbon / high carbon steels High strength steels: JIS G 3113 SAPH310/370/400/440, JIS G 3134 SPFH-540/590, EN 10149-2 S550MC/S650MC, DP590 Line pipe â?? API X42 to X-80 grades (Sour and Non Sour Applications) Boilers and pressure vessels grades Ship building grades Corrosion resistant steel Re-rolling/ Drawing Grades, Tube and Pipe/ Forming Grades, Structural/ Medium Tensile Tube/ Forming Grades, LPG/ Low Pressure Vessel Grades, HSLA Grades, Medium Carbon Grades, Weather Resistance Grades, Line Pipe Grades, Chequered Plates ASTM (USA) : A 36 A572: Gr 42, Gr 50 IS (INDIA) : IS 2062: E250 Gr A/ B/ C, E350 Gr A/ B/ C DIN (GERMANY) : DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 BS (ENGLAND) : BS 4360: 40, 43, 50 EN (EUROPE) : EN 10025: S235, S275, S355 JIS (JAPAN) : G 3106: SM400, SM 490 G 3101: SS400, SS490
0.14mm-0.8mm DX51D Prepainted Galvanized Steel Coil PPGI with SGS Pre-painted galvanized steel coil Color coated galvanized steel coil PPGI Steel Coil Commodity Color-coated Galvanized Steel Coil (PPGI/ PPGL) Thickness 0.13-1.3mm(0.16-0.8mm is the most advantage thickness) Width 600mm-1250mm( 610/724/820/914/1000/1200/1219/1220/1250mm) Zinc coating Z40-275G/M2 or AZ40-180G/M2 Top painting: 5 mic. Primer + 15 mc. R. M. P. Back painting: 5-7 mic. EP Color: According to RAL K7 standard Type of coating: PE, SMP, PVDF Techinical Standard: JIS G3302-1998, EN10142/10137, ASTM A653 Grade: SGCC, DX51D / DX52D /S250, 280GD ID coil 508mm / 610mm Coil weight: 3--7MT Package Properly packed for ocean freight exportation in 20' ' containers Application: Industrial panels, roofing and siding for painting /� automobile Price terms FOB, CFR, CIF Payment terms TT or 100% LC at sight Delivery time 25-30 days after recepit of 25% TT Remarks Insurance is all risks MTC 3.1 will be handed on with shipping documents We accept SGS certificatation test
Cold Rolled Coils 0.25MM - 3MM
EN 10025-5 S355J2WP grade is a weather-resistant steel with improved atmospheric corrosion resistance. S355J2WP steel sheets shall be done impacting test at -20�°C with the minimum energy 27 J. EN 10025-5 S355J2WP low alloy steel specification: Shapes: plates, sheet, steel strips, angle, channel and round bar Thickness : 1.0-100mm Width: 1220-4200mm Length : 5000-18000mm Notes: coil thickness up to 25mm
COLOUR COATED PRODUCTS Colour coating of coils means continuous applying of paint to flat steel strip (rolled in a coil shape) with polyurethane rolls using high-tech automation. Colour coated strip is continuously produced on the line as described in the below steps. Coils are opened, top and back surfaces of the strip are cleaned (by applying a special chemical agent and rinsing it off), chromated (an operation to increase the corrosion resistance and to enhance the paint adherence). After that the strip passes through the oven, and the primer is applied to it (paint is applied only to top surface, while back surface is covered with high adhesive polyurethane back coating paint). Thereafter, the strip passes through another oven. If colour coating is requested over the primer on both sides, the paint is applied as the last layer and the strip is dried in the furnace. Depending on the customers request, protecting film may be applied, and the colour coated strip is rolled in a coil and packed.
Having passed Hot Strip Mill and Continuous Pickling Line, after rolling on Cold Reversing Mill (CRM), full hard products with surface quality and thickness (0.25-2.00 mm) suitable for further processing on HDGL are produced. Zinc coating is applied by continuous annealing followed by immerging of the strip into zinc pot on Hot Dip Galvanizing Line (HDGL) To protect the surface of galvanized products from corrosion, chemical passivation and protective oil may be applied. Products with thickness ranging between 0.25-3.00 mm and width ranging between 800-1530 mm may be produced on Hot Dip Galvanizing Line.
S S SHEET , S.S. BARS , S.S. COIL, S.S. PLATE
Standard: AISI, ASTM, BS, DIN, GB, JIS Grade: Q235Q345 Place of Origin: Hebei, China Model Number: U02 Shape: U Channel Application: Construction and Multipurpose Perforated Or Not: Not Perforated Tolerance: �±5% Processing Service: Bending, WELDING, PUNCHING, Decoiling, Cutting Product name: U channel Surface treatment: Hot Dip Galvanised or none Material: Q235/Q345/SS400/ST37-2/ST52/Q420/Q460/S235JR/S275JR/S355JR Payment terms: T/T Technique: Hot Rolled Steel Length: 1-12m Usage: Construction Structure Key words: Hot Dipped Galvanized Channel Iron Side length Size: 20-800mm MOQ: 1 Ton
We are selling color coated secondary steel plates. This secondary steel plate is colored and coated because it comes from home appliance factory. So it's suitable for making small products such as small cases. If you contact me, I will send you the picture. Thanks, Origin : South Korea Departure : South Korea Payment terms : L/C Lead time : 2 ~ 4 weeks Price : discuss MOQ : 20ft - 1 Container (18~20 MT)
Thickness: from 0.1 mm to 2.0mm Width: from 800mm to 2000 mm
ppgiï¼?ppgl
Steel Strapping,black painted or blue tempered and waxed or without waxed,size: 0.016" *1/2 " / 5/8 " (0.40mm*12.7mm/ 16mm) 0.020" *1/2 " / 5/8 " / 3/4 " (0.50mm*12.7mm/ 16mm/ 19mm) 0.024" *1/2 " / 5/8 " / 3/4 " (0.60mm*12.7mm/ 16mm/ 19mm) 0.028" *3/4 " / 1 " / 5/4 " (0.70mm*19mm/ 25.4mm/ 32mm) 0.031" *3/4 " /1 " / 5/4 " (0.80mm*19mm/ 25.4mm/ 32mm) 0.035" *3/4 " / 1 " / 5/4 " (0.90mm*19mm/ 25.4mm/ 32mm) 0.039" *3/4 " / 1 " / 5/4 " (1.0mm*19mm/ 25.4mm/ 32mm) Elongation:3-5% for regular duty and 5-8% for high duty and 8-12% for super high duty; Tensile strength:regular duty,high duty or super high duty; Winding: ribbon or oscillated wound; Why choose us? 1.the coil weight tolerance of our mini roll steel strappings can be +/-0.5kg; 2.we can produce jumbo roll(coil weight is 150kg-400kg); 3.our super high duty steel strappings, tensile strength is min 950Mpa, elongation min 8%.
Cold Rolled Coils (CRC) Quality: Secondary Soft Origin: Europe (Belgium) POL: Antwerp Port Selection: Allowed Quantity: 1900+ MT For, Malaysia, Vietnam, Taiwan, Sri Lanka, Bangladesh, India, Any Asian Country If you are interested on kindly contact us,
HRC: Soft Quality Origin: Europe POL: Antwerp Port Mill: Arcelor Selection: Allowed Quantity: 1400+ MT For, Malaysia, Vietnam, Taiwan, Sri Lanka, Bangladesh & India If you are interested on kindly contact us, Md. Akib Javed Sales Manager, Metro Premium Steel Sdn Bhd Phone/WhatsApp: 60143999854 Email: javed@metropremiums.com
Product Description We can supply all kinds of condenser coated bundy tube, copper coated tube, codenser pipe, bundy tube, steel pipe 1.product name: copper coated bundy steel tube 2.standard and Materia:ASTM A254� BHG2 low carbon steel 3.Size:OD 4mm --12.7mm, W.T: 0.5mm--1.0mm 4.Zinc coating thickness: 6um--12um 5. Treatment: copper coated 6. Product application: refrigeration,auto brake system 7.Surface outlook:� Both ends of tube without rag, corner processing, smooth, absence of istortion. 8. Packing:� plastic bag inside, iron frame fixed 9.Certification: ISO9001, ROHS Chemical Composition C Si Mn P S â?¤0.08% â?¤0.03% â?¤0.03% â?¤0.02% â?¤0.02% � Chemical Composition Machnical Properties � Tensile Strength � â?¥290Mpa � Yield Strength � â?¥180Mpa � Elongation � â?¥20% � Salt spray test � 24hours � Inside Surface Cleanliness � â?¤20g/m2 The tolerance allowed for the OD of the steel tube: OD The tolerance allowed (based on no coating) < 4.76 �±0.05mm 4.76 ~ 8.00 �±0.08mm > 8.00 ~ 12.00 �±0.10mm � The tolerance allowed for the thickness of the steel tube: Thickness The tolerance allowed (based on no coating) 0.50 �±0.07mm 0.70 �±0.08mm 1.00 �±0.09mm
