Hope everything goes well! We are, SUTOR GROUP, manufacturer of Cold rolled steel coil, Galvanized steel coils (zinc coating: Z40-Z275) and Pre-painted steel coils in China. We have four production lines with about one million tons annual capacity. We also specialize in supply Hot rolled sheet and plate, Galvalume/Aluzinc steel coils, Superdyma, Zincalume, ZAM(Zinc-Alu-Mag), Aluminized steel coil, Roof sheet/Panels/Corrugated sheet and Prepainted aluminum coils with very competitive price. Thanks and best regards Sara Sha Senior Steel Specialist
Galvanized steel sheet /coil features: 1. Zinc coating :30-275g/m2( as required) 2. Thickness:0.12-2.0mm 3. Width:600-1250mm 4. Coil id:508mm,610mm 5. Coil weight: 3-5MT, 6-8MT 6. Surface:regular/mini/zero spangle, chromated, skin pass, dry etc. 7. Application: With excellent cold bending molded manufacturablity, good decoration effect, strong anti-corrosion ability.
helicoil is a special wire thread insert which is used to strengthen the inner thread on aluminum parts or repair spoiled inner thread hole. metric and inch sizes are in stock. Shanghai Elite fastener Co.ltd is the right manufacturer focusing on producing helicoil wire thread inserts , self tapping inserts and key lock inserts, and rivet nuts as well , any inquiry, I will give you a quick response. dfeng_jack@hotmail.com whatsapp: +8613917843387
All Types Of Sheets And Coils And Wire Rod Products Are Available.
brief introduction Prepainted galvalume steel coil, also named PPGL and color coated steel coil with a hot dip zinc aluminum coated steel sheet substrate.Henan Tiga Engineering offers a variety of prepainted galvalume steel coil with all RAL colors or customized. processing Prepainted galvalume steel coil is made of zinc coated steel coils as substrate which is processed by surface degreasing, phosphating, and complex acid salt treatment, and then it is coated with organic paint to get better anti corrossion property and beautiful surface. applications Prepainted galvalume steel coil is widely used in light industry, household electric appliance, automobile, construction and main material of roof sheet. packing details All products have standard seaworthy export packing. From inside to outside, there are anti-rust cloth, plastic film, stainless steel guard board, strapping and lock catch. technical data product name prepainted galvalume steel coil substrate material hot dip alu-zinc steel coil steel grade SGCC/DX51D+AZ, DX52D+AZ, SGCD/DX53D+AZ, SGCE/DX54D+AZ,SGCH alu-zinc coating 25-180 g/m2, or according to customer's request thickness normal 0.14mm -0.8mm, or customized width 20-600 mm; 600mm-1250mm surface color All ral color, or customized. surface coating type PE,SMP,HDP,PVDF paint layer top: surface state nomal coating, matt, printed, embossed,filmed coil weight 1-8T, normally 3-5 T coil ID normally 508 mm package method normally horizontal with standard export seaworthy package quality standard EN JIS GB applications construction materials coated sheet base materials trade terms Price term FOB, CFR, CIF, EXW Payment term T/T, Western Union, L/C
brief introduction Henan Tiga Engineering Co., Ltd. offers a variety of hot dipped aluminum zinc steel strip, sheet and coil. Hot dip aluminum zinc steel coil is also named aluzinc steel coil, galvalume steel coil or zincalume steel coil. processing Aluminum zinc coated steel coil is proceeding by dipping aluminum and zinc on the surface of cold rolled steel sheet. advantages Hot dipped aluminum and zinc has much stronger anti-erode and longer usage period compared with hot dipped zinc steel sheet. And it looks more symmetrical and spatial. applications Hot dipped aluminum zinc steel coil is widely used in light industry, household electric appliance, automobile, construction and main material of prepainted steel coil. packing details All products have standard seaworthy export packing. From inside to outside, there are anti-rust cloth, plastic film, stainless steel guard board, strapping and lock catch. technical data product name hot dipped aluminum zinc steel coil base material cold rolled steel coil steel grade DX51D, DX52D, DX53D, SGCC, etc AL-ZN coating 25g-180 g/ m2, or according to customer's request thickness 0.16-1.5 mm width 20-600 mm; 600mm-1250mm coil weight 1-8T, normally 3-5 T coil ID normally 508 mm surface treatment Chromate-passivated, oiled, chromate-passivated and oiled, untreated (dry), anti-finger treated package method normally horizontal with standard export seaworthy package quality standard EN JIS GB applications construction materials coated sheet base materials trade terms price term FOB, CFR, CIF, EXW payment term T/T, Western Union, L/C
Henan Tiga offers a variety of hot dip galvanized steel strip, sheet and coil. processing Galvanized steel coil is proceeding by the chemistry degrease and electroanalysis with the cold rolled steel coil and sheet, clean the oils on the surface of steel, sufficiently heated to the proper temperature for zinc coating, pass by level up, strain rectify, and then passivation or annoit etc. advantages Hot dipped zinc on the surface of cold rolled steel sheet improves anti-erode and prolong the usage period of steel coil. The galvanized steel coil looks more beautiful and artier. applications Hot dip galvanized steel coil is widely used in light industry, household electric appliance, automobile, construction and main material of prepainted steel coil.�¯�¿�½ packing details All products have standard seaworthy export packing. From inside to outside, there are anti-rust cloth, plastic film, stainless steel guard board, strapping and lock catch. technical data product name hot dipped galvanized steel coil base material cold rolled steel coil steel grade DX51D, DX52D, DX53D, SGCC, etc zinc coating 30-275 g/ m2, or according to customer's request thickness 0.12-1.5 mm width 20-600 mm; 600mm-1250mm coil weight normally 3-5 T coil ID normally 508 mm surface structure regular spangle, minimized spangle, zero spangle, big spangle surface treatment chromate-passivated, oiled, chromate-passivated and oiled, untreated (dry) package method normally horizontal with standard export seaworthy package quality standard EN JIS GB applications construction materials coated sheet base materials trade terms FOB, CFR, CIF, EXW payment term T/T, Western Union, L/C
Aluminium Colour Coated Coils Thickness : 0.18 - 1.2 mm Width : 750 - 1250 mm Coil Weight : 3 - 5 MT Coil ID : 508 mm
Cold Rolled Coils and Slits, prime and second choice
Galvanised Coils and Slits prime and second choice
We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow: To retain the steel intact with its full initial strength. To provide the surface a more pleasing appearance. To increase the life of any suitable organic finishing system applied over it. To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere. Features Uniform zinc coating in the range of 60-600 GSM Spangles: Zero / regular / minimized / suppressed Surface finish: Normal spangle, large spangle, small spangle, matte surface With and without tension leveling Passivation: Chromated (Hexavalent / Trivalent) Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Dimensions Thickness: 0.18 - 3.2 mm Width: 800 - 1,500 mm Length: Up to 2,500 mm Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions Thickness: 0.15-3.2 mm Width: 900 - 1,500 mm Length: Up to 2,500 mm Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) â?? further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions PPGI and PPGL Type: Continuous Coil Color Coating Thickness (MM):0.18 TO 2.00 MM Width (MM):900 TO 1450 MM GSM: 70-250 Gsm Paint Coating thickness: 15-40microns Surface Finishes: Smooth, matt, high gloss, textures, printed Output Coil ID (MM):508mm / 610mm Output Coil OD (MM):1200 mm Output Coil Weight (MT):3-7 MT Type of Painting: EXPOXY,RMP (Regular Modified Polyester), SMP (Silicon Modified Polyester) HDP (High Durable Polyester), SDP (super Durable Polyester) PVDF (Poly Vinylidene Fluoride), PLASTISOL, PUPA/ARS, Anti-Bacterial, Wrinkle Finish /Anti Skidding Self-Cleaning / Anti Dust. Type of Material: HOT DIPPED â?? GALVANIZED steel (ZINC : 60-350 GSM) HOT DIPPED -ALU ZINC (ALUZINC 30-150) Grade:LFQ,SS,SGCC,CS,DX,HX Paint Coating:4-8 Microns primer + 15 TO 35 microns top Coat ( Four Coat System also available â?? Top & Bottom Side with Primer + Paint ) Supply conditions Coil / Sheet/ Slit / corrugated sheets / plain sheets / trapezoidal profiles Applications Construction and infrastructure: Industrial roofing and cladding, cold storage and warehouses, airports, atriums in malls, showrooms, false ceilings, lighting fixture White goods: Refrigerators, display freezers, washing machines, air conditioner wraps Automotive: Bus bodies, railway coaches, luxury coaches
Dimensions Thickness: 0.4-3.2mm (CRCA); 0.15-1.9mm (CRFH) Width: 800-1,625mm Material - Mild Carbon Steel Length - Can be cut to sheets according to requirement Max. Weight - 20MT per coil Grades Extra Deep Drawing steels (EDD, IF) IFHS (350, 400, 440) Bake hardening steel (BH180,220) HSLA (320, 340, 440) Semi-processed electrical steels Steels for enameling CORTEN ASTM: A 1008: DS type A & B, DDS, EDDS, EDDS+ IS: IS 513: D, DD, EDD DIN: DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 EN: EN 10268: HSLA 340, HSLA 420,EN 10130: DC 01, 03, 04, 05/06 JIS: G 3141: SPCD, SPCE, SPEN, SPRC 340/ 390,SPFC 340/ 390/ 440 Supply Condition: Coil / Slit / Sheet form Surface textures a. Smooth (plating applications) - suitable for electroplated articles and also for re-rolling when a matt texture is undesirable. A maximum surface roughness of 0,5 micrometers centre line average (CLA) is aimed for. Typical applications are car bumpers, door locks and other electroplated articles. b. Light matt (drawing and pressing applications)- surface roughness of 0.60 - 1,25 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are automobile panels. c. Medium matt (drawing and pressing applications)- A surface roughness of 0,8 - 1,6 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are drum bodies and ends.
Dimensions Thickness: 1.6 -25mm Width: 900-2,100mm Material - Mild Carbon Steel Max. Weight â?? 22 â?? 25 MT Grades Drawing quality steel: D / DD / EDD Cold rolling grades: IF (Interstitial Free) and High Strength IF Steels Medium carbon / high carbon steels High strength steels: JIS G 3113 SAPH310/370/400/440, JIS G 3134 SPFH-540/590, EN 10149-2 S550MC/S650MC, DP590 Line pipe â?? API X42 to X-80 grades (Sour and Non Sour Applications) Boilers and pressure vessels grades Ship building grades Corrosion resistant steel Re-rolling/ Drawing Grades, Tube and Pipe/ Forming Grades, Structural/ Medium Tensile Tube/ Forming Grades, LPG/ Low Pressure Vessel Grades, HSLA Grades, Medium Carbon Grades, Weather Resistance Grades, Line Pipe Grades, Chequered Plates ASTM (USA) : A 36 A572: Gr 42, Gr 50 IS (INDIA) : IS 2062: E250 Gr A/ B/ C, E350 Gr A/ B/ C DIN (GERMANY) : DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 BS (ENGLAND) : BS 4360: 40, 43, 50 EN (EUROPE) : EN 10025: S235, S275, S355 JIS (JAPAN) : G 3106: SM400, SM 490 G 3101: SS400, SS490
0.14mm-0.8mm DX51D Prepainted Galvanized Steel Coil PPGI with SGS Pre-painted galvanized steel coil Color coated galvanized steel coil PPGI Steel Coil Commodity Color-coated Galvanized Steel Coil (PPGI/ PPGL) Thickness 0.13-1.3mm(0.16-0.8mm is the most advantage thickness) Width 600mm-1250mm( 610/724/820/914/1000/1200/1219/1220/1250mm) Zinc coating Z40-275G/M2 or AZ40-180G/M2 Top painting: 5 mic. Primer + 15 mc. R. M. P. Back painting: 5-7 mic. EP Color: According to RAL K7 standard Type of coating: PE, SMP, PVDF Techinical Standard: JIS G3302-1998, EN10142/10137, ASTM A653 Grade: SGCC, DX51D / DX52D /S250, 280GD ID coil 508mm / 610mm Coil weight: 3--7MT Package Properly packed for ocean freight exportation in 20' ' containers Application: Industrial panels, roofing and siding for painting /� automobile Price terms FOB, CFR, CIF Payment terms TT or 100% LC at sight Delivery time 25-30 days after recepit of 25% TT Remarks Insurance is all risks MTC 3.1 will be handed on with shipping documents We accept SGS certificatation test
Cold Rolled Coils 0.25MM - 3MM
EN 10025-5 S355J2WP grade is a weather-resistant steel with improved atmospheric corrosion resistance. S355J2WP steel sheets shall be done impacting test at -20�°C with the minimum energy 27 J. EN 10025-5 S355J2WP low alloy steel specification: Shapes: plates, sheet, steel strips, angle, channel and round bar Thickness : 1.0-100mm Width: 1220-4200mm Length : 5000-18000mm Notes: coil thickness up to 25mm
COLOUR COATED PRODUCTS Colour coating of coils means continuous applying of paint to flat steel strip (rolled in a coil shape) with polyurethane rolls using high-tech automation. Colour coated strip is continuously produced on the line as described in the below steps. Coils are opened, top and back surfaces of the strip are cleaned (by applying a special chemical agent and rinsing it off), chromated (an operation to increase the corrosion resistance and to enhance the paint adherence). After that the strip passes through the oven, and the primer is applied to it (paint is applied only to top surface, while back surface is covered with high adhesive polyurethane back coating paint). Thereafter, the strip passes through another oven. If colour coating is requested over the primer on both sides, the paint is applied as the last layer and the strip is dried in the furnace. Depending on the customers request, protecting film may be applied, and the colour coated strip is rolled in a coil and packed.
Having passed Hot Strip Mill and Continuous Pickling Line, after rolling on Cold Reversing Mill (CRM), full hard products with surface quality and thickness (0.25-2.00 mm) suitable for further processing on HDGL are produced. Zinc coating is applied by continuous annealing followed by immerging of the strip into zinc pot on Hot Dip Galvanizing Line (HDGL) To protect the surface of galvanized products from corrosion, chemical passivation and protective oil may be applied. Products with thickness ranging between 0.25-3.00 mm and width ranging between 800-1530 mm may be produced on Hot Dip Galvanizing Line.
