SV Trade is supply & exports high quality products like galvanized sheet coils that are supplied in the form of stretch leveled and skin passed in different grades like deep drawing and ordinary. We take utmost care while producing the products as they are specifically developed in accordance to various international and domestic quality standards like Indian, ASTM, JIS, Euro, Ethiopian etc. Through our world class infrastructure we have increased our growth. This has further resulted in meeting the global demands of our galvanized sheet coils. Hence we cater our products to different ? different countries. The array of our Hot Dipped Galvanized Coils / plain sheets has the following features: Thickness 0.11mm to 2.00mm Width: 19mm to 1250mm Zinc Coating 80 to 275 GSM Coil weight 5 MT max. Coil ID 508
SV Trade is supply & exports high quality products like galvanized sheet coils that are supplied in the form of stretch leveled and skin passed in different grades like deep drawing and ordinary. We take utmost care while producing the products as they are specifically developed in accordance to various international and domestic quality standards like Indian, ASTM, JIS, Euro, Ethiopian etc. Through our world class infrastructure we have increased our growth. This has further resulted in meeting the global demands of our galvanized sheet coils. Hence we cater our products to different countries. The array of our Hot Dipped Galvanized Coils / plain sheets has the following features: Thickness 0.11mm to 2.00mm Width: 19mm to 1250mm Zinc Coating 80 to 275 GSM Coil weight 5 MT max. Coil ID 508
SV Trade is engaged in exporting Cold Rolled Coils/Sheets (CR sheets/coils) that range from 0.10 mm to 2.50 mm in width that is up to 1250 mm. These are available in 'D', 'DD', 'EDD' series. Our quality products are applicable in a host of industries like automobile, cycle, and white goods. We give utmost importance to the requirements of the customers and develop products that meet their specifications in hard, semi-hard and soft quality. We source the materials from certified producers resulting in a range of CR coils that is par excellence. Such high standards of quality have won us a reputed clientele
We are the Supplier of Secondary Galvallum and Galvanised Category Steel Coils of JSW,Tata ,Arcellor Mittal .in Bulk Quantity
We export Cold Rolled Grain Oriented Steel Coil
We can export prime prepainted steel coil from China. Specification : 0.15-2.0mm, width: 914mm/1000mm/1219/1200mm/1250mm. Top side color: depend on RAL No. Back color: RAL 9003. Coat: 15+7mu. Zinc: 60-275g. Message: zssteel(at)163(dot)com Looking forward to hear soonest.
Send me blueprints or draws with dimensions information to quote
Size: Request customize Z: Request customize For more detail please visit: www.yotocoils.com.hk
Convective coil
Brand Name: Zhicheng Steel Surface Treatment: Galvanized/Galvalumed/Prepainted/Skin passed/oil coated Tensile Strength : 200 MPa - 500 MPa Yield Strength: 200 MPa - 500 MPa Ductility: 20-35% Thickness: 0.15 mm - 3 mm Width: 36mm - 1250mm Roll Diameter: 508 mm - 610 mm Typical Applications: Metal And Metal Product, Constructional material, Home appliance. Product Standards: ASTM A653 / ASTM / USA EN 10142 / European Union JIS G3302/G3321/G3317 / Japan ASTM A654/A792 Steel Grades: DX51D CGCC/CGCH , SGCC/SGCH , SGLCD/SGLCDD SS Grade 33-80 Grade 60 - ASTM A516 - USA Company Standards: ISO 14001:2004 , ISO 9001:2008 , OHSAS 18001
CONTENTS PREPAINTED GALVANIZED PPGI PREPAINTED GALVALUME PPGL BASE METAL GALVANIZED GALVALUME / ALUZINC STANDARDS JIS G 3312-CGCC, CGC340-570, (G550), JIS G 3312-CGLCC, CGLC340-570, (G550), ASTM A -755M CS-B, SS255-SS550 ASTM A -755M CS-B, SS255-SS550 THICKNESS 0.14~2.0 mm 0.14~2.0 mm Width 750~1500 mm 750~1500 mm Coil ID 508/610 mm 508/610 mm Substrate Soft, Medium, Hard Soft, Medium, Hard Coating Mass Z 40-275 (g/m2) AZ 40-150 (g/m2) Paint Systems Primers: Epoxy, PU Primers: Epoxy, PU Top Coating: Top Coating: Polyester (RMP/PE) Polyester (RMP/PE) Silicon Modified Polyester (SMP) Silicon Modified Polyester (SMP) Poly Vinyl Di Flouride (PVDF) Poly Vinyl Di Flouride (PVDF) Back Coating: Epoxy, Polyester, PU Back Coating: Epoxy, Polyester, PU Coating 20 50 Microns 20 50 Microns Colours As Per RAL Chart/Customer requirements. As Per RAL Chart/Customer requirements. Surface Finishes Glossy and Matte Glossy and Matte Cut to length 200mm-5000mm 200mm-5000mm Capacity 1,500,000.00 Ton / year 1,500,000.00 Ton / year Packing Sea Worthy Export Packaging Sea Worthy Export Packaging Loading Port Tianjin Port/Jingtang Port/Shanghai Port Tianjin Port/Jingtang Port/Shanghai Port
We are the Supplier of Galvanised Slitted Coils Coils ,As Per Customers's Requirements
Shandong Wofeng New Material Co., Ltd. is manufacturing printed PPGI/PPGL since year 2008. We are mainly engaged in the sales and processing of color coated steel/aluminium, printed steel/aluminium, PVC laminated steel/aluminium coils and sheets.
We deal in Hard Rolled, Cold Rolled, Galvanized, Tin plate , TFS coils , sheets & its scrap too.
Cold Rolled Coils and Slits, prime and second choice
Galvanised Coils and Slits prime and second choice
We are a leading Manufacturer, Traders and supplier of galvanized steel sheet. Galvanization is the process of applying a protective zinc coating to steel or iron in order to prevent it from rusting. The term is derived from the name of Italian scientist Luigi Galvani. Galvanized iron (GI) sheets are steel sheets which are basically coated with zinc and include a range of hot dip galvanized and electro-galvanized steel sheets. Zinc weathers at a very slow rate, so the coating generally has a long life. Zinc has a greater electro-negativity than iron and hence provides cathodic (or sacrificial) protection to the steel. This results in the zinc corroding in preference to the steel if the coating is chipped or damaged to expose the base metal. Besides acting as galvanic protector, The other functions of the zinc layer are as follow: To retain the steel intact with its full initial strength. To provide the surface a more pleasing appearance. To increase the life of any suitable organic finishing system applied over it. To protect the steel from corrosive attack in most atmospheres, acting as a continuous and lasting shield between steel and the atmosphere. Features Uniform zinc coating in the range of 60-600 GSM Spangles: Zero / regular / minimized / suppressed Surface finish: Normal spangle, large spangle, small spangle, matte surface With and without tension leveling Passivation: Chromated (Hexavalent / Trivalent) Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Dimensions Thickness: 0.18 - 3.2 mm Width: 800 - 1,500 mm Length: Up to 2,500 mm Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions Thickness: 0.15-3.2 mm Width: 900 - 1,500 mm Length: Up to 2,500 mm Oiling: 100-1,000 GSM Winding: Controlled / staggered (+/- 5 to +/-15mm) Coil id: 508 / 610 mm Elongation: 16-33%. Grades & Standards CQ, DQ, DDQ, EDDQ, HSLA ASTM A653, SS33/37/40/50/60/80, EN 10327, JIS Commercial Steel (CS Types A, B, and C) Forming Steel (FS Types A and B) Deep Drawing Steel (DDS Types A and C) Extra Deep Drawing Steel (EDDS) Structural Steel (SS) â?? further designated by Grades (33,37,40,50,80) High Strength Low Alloy Steel (HSLAS) Supply condition Coil / Slits/ Sheet form
Dimensions PPGI and PPGL Type: Continuous Coil Color Coating Thickness (MM):0.18 TO 2.00 MM Width (MM):900 TO 1450 MM GSM: 70-250 Gsm Paint Coating thickness: 15-40microns Surface Finishes: Smooth, matt, high gloss, textures, printed Output Coil ID (MM):508mm / 610mm Output Coil OD (MM):1200 mm Output Coil Weight (MT):3-7 MT Type of Painting: EXPOXY,RMP (Regular Modified Polyester), SMP (Silicon Modified Polyester) HDP (High Durable Polyester), SDP (super Durable Polyester) PVDF (Poly Vinylidene Fluoride), PLASTISOL, PUPA/ARS, Anti-Bacterial, Wrinkle Finish /Anti Skidding Self-Cleaning / Anti Dust. Type of Material: HOT DIPPED â?? GALVANIZED steel (ZINC : 60-350 GSM) HOT DIPPED -ALU ZINC (ALUZINC 30-150) Grade:LFQ,SS,SGCC,CS,DX,HX Paint Coating:4-8 Microns primer + 15 TO 35 microns top Coat ( Four Coat System also available â?? Top & Bottom Side with Primer + Paint ) Supply conditions Coil / Sheet/ Slit / corrugated sheets / plain sheets / trapezoidal profiles Applications Construction and infrastructure: Industrial roofing and cladding, cold storage and warehouses, airports, atriums in malls, showrooms, false ceilings, lighting fixture White goods: Refrigerators, display freezers, washing machines, air conditioner wraps Automotive: Bus bodies, railway coaches, luxury coaches
Dimensions Thickness: 0.4-3.2mm (CRCA); 0.15-1.9mm (CRFH) Width: 800-1,625mm Material - Mild Carbon Steel Length - Can be cut to sheets according to requirement Max. Weight - 20MT per coil Grades Extra Deep Drawing steels (EDD, IF) IFHS (350, 400, 440) Bake hardening steel (BH180,220) HSLA (320, 340, 440) Semi-processed electrical steels Steels for enameling CORTEN ASTM: A 1008: DS type A & B, DDS, EDDS, EDDS+ IS: IS 513: D, DD, EDD DIN: DIN 17100: ST 37.3, ST 44.2, ST 44.3, ST 52.3 EN: EN 10268: HSLA 340, HSLA 420,EN 10130: DC 01, 03, 04, 05/06 JIS: G 3141: SPCD, SPCE, SPEN, SPRC 340/ 390,SPFC 340/ 390/ 440 Supply Condition: Coil / Slit / Sheet form Surface textures a. Smooth (plating applications) - suitable for electroplated articles and also for re-rolling when a matt texture is undesirable. A maximum surface roughness of 0,5 micrometers centre line average (CLA) is aimed for. Typical applications are car bumpers, door locks and other electroplated articles. b. Light matt (drawing and pressing applications)- surface roughness of 0.60 - 1,25 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are automobile panels. c. Medium matt (drawing and pressing applications)- A surface roughness of 0,8 - 1,6 micrometers centre line average (CLA) and 100 peaks per inch (PPI) minimum is aimed for. Typical applications are drum bodies and ends.
