Lakdek EPS Sandwich Panel Lakdek Sandwich Panel is a self supporting metal panel insulated with EPS for roofing, and walling to be used in industrial, commercial buildings and refrigerated rooms., The panel is coated with AZ100 Zinc Aluminium alloy for superior durability. The exterior, side is coated with 20 microns of regular polyester finish coat over 5 microns of, polyester primer. Benefits of using Lakdek EPS Sandwich Panel 1. Long life and very low maintenance cost. 2. Good sound insulation. 3. High load bearing capacity at low weight. 4. Excellent and durable thermal insulation. 5. Absolute water and vapour barrier. 6. Easy repair and replacement in case of damage. 7. Easy and speed of installation. 8. Excellent air tightness and free of thermal bridges which result in considerable energy savings. EPS Sandwich Panel Specification Zn/Al Sheet Thickness - 0.3mm – 0.6mm Core Materials - 50mm – 250mm Effective Width (Cladding) - 950mm – 1150mm Effective Length - By customized
Light guage steel frames, portacabins, portable toilets, low cost housing, sandwich panels, roofing and plumbing solutions.
Aluminum Ubc.
Lakdek Roofing Lakdek Roofing is available in three profiles in non colour and colour bonded steel. This is for industrial, Commercial and domestic applications. Product Specifications Feeding Width - 1000mm Effective Cover Width - 840mm Rib Height - 25mm Tensile Strength - G550 (Nominal sheet depth) Coating Class - AZ 150 Recommended Total Coated Thickness - 0.47mm and 0.40mm Recommended Screw - Steel Frames - 12 x55/ 12 x 50 Timber Frames - 12 x 68mm
Lakdek Corrugated Roofing Sheet Product Specifications Feeding Width - 1200mm Effective Cover Width - 988mm Rib Height - 19mm (Nominal sheet depth) Tensile Strength - G550 and G350 Material - Zn/Al - GI Standerd Total Coated Thickness - 0.12mm up to 0.47mm
Lakdek Roofing (3) of colour bonded, (Zinc Aluminium) Alloy Coated Roofing, and Cladding in Sri Lanka is suitable, for a wide range of heavy duty roofs., Lakdek Roofing (3) is ideally suited to, carry large volumes of water on roofs, with a pitch as low as 1° degree. The, unique fastener system by using a roof, connector provides easier and faster, installation., Lakdek Roofing (3) is available in, fifteen attractive colours and could be, manufactured to customized lengths. Product Specifications Feeding Width - 1000mm Effective Cover Width - 600mm Rib Height - 88mm Tensile Strength - G550 Coating Class - AZ 150 Recommended Total Coated Thickness - 0.35mm up to 1.20mm
Lakdek Wall Cladding C (1) For walls, fascias, fences, awnings and gates. Lakdek Cladding is available in customized lengths. Product Specifications Feeding Width - 1000mm Effective Cover Width - 900mm Rib Height - 15mm Tensile Strength - G550 Coating Class - AZ 150 Recommended Total Coated Thickness - 0.47mm, 0.40mm and 0.35mm Recommended Screw - Steel Frames - 12 x 25, 12 x 20 Material Specifications Standards Code - Material - 55% Aluminium, 43.4% Zinc, 1.6% Silicon alloy coated steel base Tensile Strength - 550 N/mm2 (Grade 550) Hi-ten 350 N/mm2 (Grade 350) Soft Coating Class - AZ 150 (150gms/m2 of Zinc Aluminium coating on base metal) International Standard AS1397 Australian Standard ASTMB 117
Lakdek Crimp Curve Roofing Curve sheets are recommended for walkways, car parks, busstops, weather sheds and, a variety of commercial, industrial and domestic building applications. The curved, sheets also contribute to cost saving due to lesser supporting frame work for fascias, and roofs. Product Specifications Feeding Width - 1000mm Effective Width - 840mm Rib Height - 25mm Tensile Strength - G550 (Hi-Ten) and G350 (Soft) Coating Class - AZ 150 Recommended Total Coated Thickness - 0.47mm, 0.40mm and 0.35mm Recommended Screw - Steel Frames - 55mm Timber Frames - 68mm (Delta Coated Screws)
Lakdek Tile Roofing The Tile Roofing is available in four profiles to the Company’s roofing range which is, neat and aesthetic, giving a streamlined and attractive perspective to any building. The, tile profile is ideal for Hip Roofs (Gable), Houses (Domestic), Hotels and any commercial, building requiring an elegant finish. Product Specifications Feeding Width - 1200mm Effective Cover Width - 950mm Rib Height - 30mm Tensile Strength - G550 (Hi-Ten) and G350 (Soft) Coating Class - AZ 150 Recommended Total Coated Thickness - 0.47mm, 0.40mm and 0.35mm Standard Tile Length - 10” (inches) orders for customized tile lengths are also accepted
Multi-Wave Roof Tile Product Specifications Feeding Width - 1200mm Effective Cover Width - 950mm Rib Height - 28mm Tensile Strength - G550 (Hi-Ten) and G350 (Soft) Coating Class - AZ 150 Recommended Total Coated Thickness - 0.47mm, 0.40mm and 0.35mm Standard Tile Length - 10” (inches) orders for customized tile lengths are also accepted
Stereo View Roof Tile Product Specifications Feeding Width - 1000mm Effective Cover Width - 828mm Rib Height - 28mm Tensile Strength - G550 (Hi-Ten) a nd G350 (Soft) Coating Class - AZ 150 Recommended Total Coated Thickness - 0.47mm, 0.40mm and 0.35mm Standard Tile Length - 10” (inches) orders for customized tile lengths are also accepted
Stereo View Roof Tile Product Specifications Feeding Width - 550mm Effective Cover Width - 430mm Rib Height - 38mm Tensile Strength - G550 (Hi-Ten) and G 350 (Soft) Coating Class - AZ 150 Recommended Total Coated Thickness - 0.47mm, 0.40mm and 0.35mm Recommended Fasteners Steel Frames - 12 x 55/12 x 65mm delta coated screws Timber Frames - 12 x 68 delta coated screws
Lakdek Gutters Lakdek Gutters are available in ten standard designs of the same material. Generally with a thickness of 0.47mm and 0.40mm. Customized designs and thickness in substantial quantities can also be supplied upon request. The durability and the aesthetic appearance of the Gutters, manufactured in a wide range of colours, present an attractive profile to buildings. Gutter Design Specifications 500 mm Girth - Domestic & commercial applications
The K-Span Building System is introduced to Sri Lankan market for the first time. This, is a more cost effective and light weight building system. The K-Span curved sheet is, recommended for Hangers, Car Parks, Bus Stops, Cow Sheds, Chicken cages and a, variety of commercial and industrial building applications. Benefits of using K-Span Curved sheets 1. No Need for structures (Roof/Walls) 2. Lightweight and strong 3. More cost effective 4. Easy to maintain 5. Environmentally friendly and free of health hazards 6. Heat resistance 7. High corrosion resistance 8. Yield advantage cut edge protection 9. Wide range of colours 10.Customized lengths Product Specifications Feeding Width - 914mm Effective Cover Width - 610mm Panel Height - 203mm Tensile Strength - G550 Coating Class - AZ 150 Recommended Total Coated Thickness - 0.60mm up to 1.5mm
Laksteel H & I Sections Geometrical moment of intertia I = Ai 2 Radius of gyration of area i = I / A Modulus of section Z = I / e
Laksteel Square Tubes (galvanized & black iorn) Size - Thikness (mm) (mm) 20 x 20 25 x 25 32 x 32 40 x 40 50 x 50 65 x 65 75 x 75 100 x 100 125 x 125 150 x 150 0.90 mm up to 3.00 mm * Standerd Length 6 m * Customnized lengths are also accepted
Laksteel Rectangular Tubes (galvanized & black iorn) Size (mm) - Thikness (mm) 40 x 20 50 x 25 75 x 40 100 x 50 125 x 65 150 x 75 200 x 100 0.90 mm up to 3.00 mm * Standerd Length 6 m * Customnized lengths are also accepted
Laksteel Electric Resistance welded galvanized pipe Specification for the G.I pipe Normal Size Inch mm Thikness (mm) Out side Diameter (mm) Weight Length ½ 15 1.8 21.4 0.311 ¾ 20 1.8 26.9 0.386 1 25 1.9 33.8 0.513 1¼ 32 2.2 42.5 0.746 1½ 40 2.3 48.4 0.887 2 50 2.6 60.3 1.250 2½ 65 2.7 76.0 1.634 3 75 3.0 88.9 2.121 4 100 3.2 114.3 2.907 * Standerd Length 6 m * Customnized lengths are also accepted
Lakdek Roll Forming Ridge Cap Lakdek Roll forming ridge cap ideally suitable for, Tile Roofs and corrugated roofs. Lakdek roll, forming ridge cap is available in non colour,, colour bonded and customized lengths.
Laksteel Molding Square Tube Laksteel Molding Square Tube is available in Non colour and colour bonded Hi-tensile, and Soft (G550 and G350) and G.I material. This is for industrial, commercial and, domestic applications. Laksteel molding square tube ideally suitable for Aluminium, Partition frames, light weight frames and light weight structure. Product Specification Size (mm) 40 x 40 Tensil Strength G550 (Hi-ten) G350 (Soft) Coating Class AZ 150 Recommended total coated thickness 0.70mm, 0.47mm, 0.40mm and 0.35mm.
