Dupont titanium dioxide, dupont refrigerants and prime virgin mercury 99.999%..
Copper cathode, Ilmenite TiO2.Clearing services, managing of financial services
Calcium hypochlorite, pvc resin, refrigerant gas, titanium dioxide, glacial acetic acid hydrogen peroxide, labsa 96% sodium lauryl ether sulfate (sles) 70% ethylene dichloride, ethanol, low aromatic white spirit, caustic soda, calcium carbide, phosphoric acid, acetic acid, formic acid, liquid silver mercury.
White spirit (stoddard solvent), potassium hydroxide, inorganic chemical, caustic soda, flakes & pearls, silver liquid mercury 99.99% purity, hydrochloric acid, white mineral oil, titanium dioxide, potassium cyanide, fresh chicken eggs.
Continuous Basalt Fiber Products. Industrial use: roads, pavements, water pipes, fluids or electrical wiring. Basalt fiber will not burn but smoking of the product may occur at approximately 200 - 260 °C due to decomposition of sizing. Sizings may decompose in a fire situation and release carbon monoxide, carbon dioxide, water and minute amounts of partial sizing decomposition products
Specification sheet cdsbo: Polarization : 99.80 degrees minimum Ash content : 0.04% maximum Icumsa : 45 rbu Solubility : 100% dry and free flowing Color : Sparkling white Radiation : Internationally accepted Granulation : Fine to medium Moisture : 0.4% maximum Magnetic particles : 4mp/kg – SO2: 70mg/kg Ash by electrical Conductivity : 0.4% maximum – dry weight Sulphur dioxide : 20 mg / kg minimum Sediments : None Smell : Free of any Reducing sugar : 0.05% maximum by weight Maximum AS : 1 p.P.M. Maximum PB : 2 p.P.M. Maximum CU : 3 p.P.M. 50 kgs/bag palletized.
Ordinary portland cement 42.5n Ordinary portland cement grade 42, 5n According to british standards 12/1996 or astm c-150 Chemical composition Silicon dioxide (sio2) 21.00 Aluminium oxide (a12o3) 5.30 Ferric oxide (fe2o3) 3.30 Calcium oxide (cao) 65.60 Magnesium oxide (mgo) 1.10 Sulphur trioxide (so3) 2.70 Loss of ignition (loi) 0.90 Tricalcium silicate (c3s) 60.00 Dicalcium silicate (c2s) 15.00 Tricalcium aluminate (c3a) 8.05 Tricalcium alumino ferrice (c4af) 9.76 Physical and mechanical properties Blain cm2/gr 3.250 Autoclave expantion 0.02 Initial setting time (vicat) 105 minutes Final setting time (vicat) 135 minutes Compressive strength @ 03 days 230 kg/cm2 and @ 07 days 305 kg/cm2 and @ 28 days 420 kg/cm2 Compressive strength mortar mpa (n/mmª): Strength class: 42, 5n Early strength: 2 days v 10.00 Standard 28 days strength: minimum 42, 5. Maximum 62, 5. Origin: russia, ukrania. Quantity: 100.000 mt- more 1.000.000mt Packing : 50 kg bags
WHITE CANE SUGAR ICUMSA 45. Brazilina Sugar ICUMSA 45 SPECIFICATION: Brazilina Sugar ICUMSA 45 colour of the solution: 45 icumsa units max radiation: within internationally accepted limits moisture content: 0.06% max invert sugar content: 0.04% max conductivity ash: 0.04% max sulphur dioxide: 15 mg/kg max anti-caking agents: maximum level of 1.5 m/m singly or combination of following agents: -calcium phosphate, tribasic magnesium carbonate silicon dioxide, amorphous (dehydrated silica gel) calcium silicate magnesium trisilicate sodium aluminosilicate calcium aluminosilicate polarization: 99.7% min moisture content: 0.06% max invert sugar content: 0.04% max conductivity ash: 0.04% max total bacteria: 60 max e. coli: 30 max mould: 25 max sulphur dioxide (sosub2): 15 max arsenic (as): 0.5 max lead (pb): 0.5 max Brazilina Sugar ICUMSA 45
Urea, also known as carbamide, is a safe, useful compound with a significant history. It is a naturally occurring molecule that is produced by protein metabolism and found abundantly in mammalian urine. he demonstrated that a biomolecule, urea, can be synthesized from a nonbiological starting material. prepared the inorganic compound ammonium cyanate in the lab, then heated it, causing it to isomerize to urea. Now known as the synthesis, the reaction helped to disprove the concept of vitalism, which held that organic molecules can be made only by living organisms.2 In a reaction similar to the synthesis, ammonium carbamate can be converted to urea and water. This is the basis of the process that has been used to produce urea industrially for almost a century. Ammonia and carbon dioxide (CO2) react exothermically to produce the carbamate salt, which is then heated to form urea. The heat produced in the first reaction drives the second. Typically, ammonia and urea are manufactured in the same plant so that some of the carbon dioxide byproduct from ammonia production can be used to make urea. Global urea production capacity is 220 million t/year. Why is urea produced in such large quantities? The answer is that, other than ammonia, urea has the highest nitrogen content of all industrial chemicals and is in high demand as a fertilizer. In the soil, it decomposes back to ammonia (actually ammonium ion) and carbon dioxide. Nitrogen-fixing bacteria oxidize ammonium to nitrate, which is readily taken up by the roots of crops. In addition to its high nitrogen content, urea is particularly useful because it can be applied as a solid in pellet form; and its unusually high solubility in water allows it to be incorporated into solutions with other plant nutrients.
limestone suppliers:Limestone is a sedimentary substance of chemical origin that is mainly composed of calcium carbonate. Limestone is one of its applications in construction and construction. For example, certain types of limestone, such as those found in northern Otago, are used to build blocks. It is also possible to use limestone grains directly from the mine as base materials in road construction. Also, limestone deposits can be used in agriculture because by grinding limestone, different grades can be produced. It is one of the factors that can affect plant growth. By spreading agricultural lime on the pit or soil, the carbonate content of limestone can neutralize the acid in the soil. This causes the release of minerals such as phosphate and absorption of the plant. Be commented. In the production of steel, a large amount of limestone and crude lime is used, which can be said to be one of the applications of lime in this field. Also, some insulating materials that are molded as units are silica and lime. Lime as a factor The bond reacts with the silica in a mixture of its own, and as a result the reaction of silicate and lime is used in the manufacture of insulation. One of the applications of lime is in the preparation of cement, in which about 60 to 70% of lime is used, and after heating it, carbon dioxide is released. Limestone with a grain size of 0 to 90 microns is usually used in two preparations of Itung. Itung is produced from silica powder, lime powder, aluminum cement and is a building material. Be. Lime is one of the main ingredients for consumption in the production of sugar from sugarcane and sugar beet. Lime is added to the solution as an alkaline agent to precipitate and separate the unwanted substances by creating insoluble calcium compounds. After the lime has done its job, in the next steps, it is separated by performing the carbonation process and adding
