Ultrafine copper powder 99.999%, nickel wire 0.025mm.
Steel pipes, special steels, full range of rolled products (wire rods, bars, flats, billets), cold finished (cold drawn, peeling/turning and straightening) and forged products (bars and flats) in carbon steels, free cutting steels, alloyed steels, spring steels, microalloyed steels, cold forming steel.
Steel billets, steel profiles, beams, tubes, pipes, hot rolled and cold rolled steel, bright bars, grinding balls, forging bars. prime steel, non prime steel,secondary second choice steel, surplus urea, coal, coke.
Titanium Product.
4.9 MW NATURAL GAS COGEN POWER PLANT with 3x JENBACHER JW 616GS 1.500 rpm. 50 Hz. Engines Details Make: JENBACHER (Austria) Model: JW 616GS. Fuel: Natural Gas. Q’ty: 3. Nominal Output: 1.605 kW. (each) Total Output: 4.9 MW. Speed: 1.500 rpm. Total running hours: Unit 1: 60.000 hrs. aprox. Unit 2: 60.000 hrs. aprox. Unit 3: 61.000 hrs. aprox. The last main overhaul was done in year 2005 at 40.000 hours. The next main overhaul is scheduled at 70.000 hrs. At the intervals of 2.000-4.000 hours the maintenance was done by own technician staff. At the intervals of 10.000-20.000 hours the maintenance was done by the Jenbacher official service. The engines were stopped in summer 2011. They never had any serious breakdowns. The reports state that the engines reached the full load capacity until the last running day easily. Generator Details Make: NEWAGE/STAMFORD (Germany-England) Type: CG.I734H2. Base Rate (BR): 1840 KVA / 1472 kW. Frequency: 50 Hz. 690 V. 3 Phases. Cos fi: 0.8 Rating: Continuous. Excit Volts: 67 V. Excit Amps: 3.8 A. Environmental temperature: 40 ºC. Enclosure: IP22. Insulation class: Class H. Management System The facility has its corresponding low-voltage cabinets for command and control, and each engine and the installation have their own cell lines. The power plant is governed by an automatic system of ABB SCADA, which allows control of each engine, data capture, storage of historical production, alarms and so on. Each of the machines in the facility has its own command and control cabinet and they are all linked to the SCADA system. Steam Boiler Make: Moiman. Year: 1997. Pressure: 11 bar. Volume: 11.08 m3. Power: 3,489,763 Kcal/h. Capacity: 4,500 Kg/h of steam. Cold water feeding and condensation network. Independent reviews done by a Control Agency under the provisions of Pressure Vessel Regulations. Chiller Absorption Machine Make : TRANE. Year: 1997. Main overhaul: pumps, tube bundles and lithium bromide in 2009 by TRANE. Inlet hot water temperature: 92ºC. Outlet temperature: 72ºC. Flow 35, 3 l/s. C.O.P: 077. Cooling power: 2.267,13 kW. Total working hours: 38.618 hours. Regular reviews done by both own technical staff and TRANE service. Each generator is connected to a 2,000 KVA transformer, yield 0.98, oil bath, which raises the voltage to 20.000 Volts. There is also a fourth smaller unit for control and measurement purposes. Tools and Spares Some spares are left in the plant like a brand new ABB turbocharger plus a set of dismantling tools. Scope of Supply 3x JENBACHER JW616GS 1.605 kW. (each) Natural Gas Generator Sets. 3x STAMFORD 1.4372 kW. (each) Electric Generators. 1x CONTROL PANEL with ABB SCADA SYSTEM. 1x MOIMAN Steam Boiler with a steam generating capacity of 4.075 kWt. 1x TRANE Chiller/Absorption Machine. 3x Transformers 2.000 KVA (each) + 1 small unit. The Gas Train. Heat exchargers, valves The exhaust silencers. The Chimney. Various fans, pumps, 3-way valves. Various documents, spares and maintenance books. Available dismantling tools and some spares at the facility. FOB price has to be calculated. For more information please contact Metalúrgica Riba, s.l. | Power Plants and Spare Parts
Lipodieta Chocolate crunch protein (crunchy chocolate) is a chocolate bar that can be included in all phases of the Lipodieta method, being also suitable for Phase A. Protein Crunch Chocolate Lipodieta has the appearance and aroma of a traditional chocolate bar. Protein Chocolate Crunch Ingredients: Cocoa butter, Inulin powder, Defatted cocoa, Soy protein, Extruded soy (soy protein isolate, rice flour, sugar and salt), Hydrolyzed porcine collagen, Glycine, Concentrated milk protein, Chocolate aroma, Emulsifier ( soy lecithin), Sweeteners (sucralose and stevia).
Precious and semi precious stones, aluminum ingots (a7 and a8), aluminium by extrusion 6063, finished aluminum 6061 and 6063 alumnia and chlorite, copper cathodes, copper cable and tubes, and milberry copper, iron ore, coal rb1, rb3, extra anthracite, manganese, titanium, tantalum, graphite, nickel, vanadium, chromium, lithium, crude oil, gas and derivates (lng, lpg).
Fanso Global Limited (FG) copper cathodes are known for high purity and consistent quality. Our Copper cathodes are produced using the Mount ISA electro-refining process and are 99.99% copper purity levels that meets the international quality standards BS 6017 1981 (1989) and u-Cath-1 / ASTM B-115 (1999) and are registered as LME A Grade. They are high grade and have the lowest levels of various group and individual impurities. Fanso Global Limited (FG) Copper cathodes are used in the manufacture of continuous copper rods for the wire, cable and transformer industries, and copper tubes for consumer durable goods and other applications in the form of alloys and sheets. SPECIFICATION OF COPPER CATHODE Product: Copper Cathodes Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99.99% Dimension: 914mm x 914mm x 12mm (LME standards) Weight of each sheet: 125kgs (+/- 1%) Net weight of each pallet: 2mts (+/- 1%) Min. weight in each container: 20mts approx. Gross weight of each container: 22.20mts approx. Packing: palletized banded by aluminum bands 2. CHEMICAL COMPOSITION Copper (Cu) : min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S:.............................. 4 PPM Iron Fe:..............................2 PPM Silver(Argent) Ag::..............................10 PPM Lead Pb:..............................0.2 PPM Nickel Ni:..............................0.2 PPM Selenium Se:..............................0.3 PPM Antimony Sb:..............................0.1 PPM Silica Si:..............................0.3 PPM Cobalt Co:..............................0.2 PPM Arsenic As:..............................0.1 PPM Bismuth Bi:..............................0.1 PPM Manganese Mn:..............................0.1 PPM Tellurium Te:.............................. 0.05 PPM Aluminum Al:.............................. 0.5 PPM Magnesium Mg:.............................. 0.4 PPM Zinc Zn:.............................. 0.4 PPM -
