Hot dipped aluminized steel (AL) is a rolled steel with an aluminized metal coating desined specifically for high temperature applications. The coating consists of an aluminium alloy containing about 8~10% silicon. * HEAT RESISTANCE : Lengthy exposure to temperatures up to 450 degrees Celsius causes very little change in Hot dipped aluminized steel and does not affect its attractive surface brightness, compared with galvanized steel sheet and cold-rolled steel sheet. * HEAT REFLECTIVITY : The thermal reflectivity of Hot dipped aluminized steel at 450¡É reaches up to approximately 80%, and this is applied to thermal reflectors for toasters, gas ranges, oil stove, and so forth. * HIGH CORROSION RESISTANCE : The corrosion resistance of Hot dipped aluminized steel is excellent due to the coating characteristics to form a thin stable oxide layer and hydroxidation layer in the air and water, respectively. * SPECIFIC USES - Automobile : Exhaust Muffler, Fuel tank, Engine heat shield, Engine manifold - Industrial : Drying furmace, Metal jacketing - Baking : Bread pan, Cake pan, Cake mould - Heating appliance : Boiler pilot burner part, Fanned heater - Home&Cooking appliance : Rice cooker, Gas range, Microwave oven, Toaster, Electrical frying pan. * Brand Name : POSCO C&C, DONG-BU STEEL * Place of Origin : South Korea * Thickness : 0.40 mm ~ 2.30 mm * Width : 800 mm ~ 1250 mm * Min. Order Quantity : 20 ~ 25 MT / one 20ft container * Payment Term : T/T advance 20%, L/C at sight, L/C 90 days from B/L date * Delivery Time : 45 ~ 60 days from L/C or Mill's option. Standard export steel packing - coil : horizontal, vertical - sheet : according to customer's order.
* CHARACTER Galvalume is an aluminum-zinc alloy coated steel : produced by a continuous hot dip process, has about 55% aluminum, 43.4% zinc and 1.6% silicon. This coating combines the superior corrosion resistance of aluminum with the cut edge protection of zinc. * EXELLENT DURABILITY Galvalume is three to six times more corrosion resistanct than zinc coated steel sheet of the same thickness. It is nacked by a 20-year warrantee for residental use * HEAT RESISTANCE The capacity ratio of the aluminum in the coated layer of Galcalume is high at over 80%. It will withstand a prolonged temperature of 315 degree Celsius without discoloration or oxidization. * HEAT REFLECTIVITY Galvalume is highly energy efficient, with superior heat reflectivity and low heat consumption. * SMOOTH SURFACE Galvalume is available in a delicate light silver spangle, so it is appropriate for decorative use. * ECONOMICALLY EFFICIENT Available in widths of five feet (MAX 1600), Galvalume reduces the loss and suite to duct and construction. * EXCELLENT WORKABILITY The worability of Galvalume is similar to that of galvanized steel sheet. Its ability to suppress fine cracks on the coating layer enhances the duranility of the treatment area. * SPECIFIC USES Power distribution board , Air conditioning components, Shutter door, Roofing material, Internal wall * Brand Name : POSCO C&C, DONG-BU STEEL, UNION STEEL * Place of Origin : South Korea * Thickness : 0.40 mm ~ 2.30 mm * Width : 800 mm ~ 2300 mm * Min. Order Quantity : 20 ~25 MT / one 20ft container * Price : FOB Busan(negotiation with Mills) + sea freight + commission + insurance premium * Payment Term : T/T advance 20%, L/C at sight, L/C 90 days from B/L date * Delivery Time : 45 ~ 60 days from L/C or Mill's option Export standard steel packing - coil : horizontal, vertical - sheet : according to customer's order.
* CHARACTER Cold rolling at, or above, a 40 percent reduction rate causes the grains of the metal to align in the direction of rolling. And it does undergo finishing processes such as annealing and temper rolling, this result in smooth, attractive surface as well as uniform thickness and flatness. Based on the high workable, they are essentially in their role as the base metal for tinplate, galvanized sheets and other coated steel products * PRODUCT FEATURES Cold-rolled steel products have clean surface and excellent drivability. They are also characterized by their superior formality and printability. So CR steel product is currently applied to various fields including automobiles, electric household appliances, and furniture office equipment. * CLASSIFICATION OF QUALITY - Commercial Quality (CQ) - Sheet of this quality is for simple bending or moderate forming. Commercial steel sheet can be bent flat upon itself in any direction at room temperature. It has a wide variety of uses, including automotive panels, electrical home appliances, drums, pipes, farm implements, office supplies, building and civil work materials, and as base metal for various coatings. - Drawing Quality (DQ) - Sheet of this quality has a greater degree of ductility and is more onsistent in performance than commercial steel because of higher standards in production, selection and melting of the steel. It is suitable for automotive panels, audio-visual equipment, and heating apparatuses. - Deep Drawing Quality (DDQ) - Sheet of this designation should be used when drawing steel will not provide a sufficient degree of ductility for fabrication of parts with stringent drawing requirements, or applications that require the sheet be free from aging. This quality is produced through special steelmaking and finishing practices. It is suitable for automotive front panels and rear fenders. - Stabilized Deep Drawing Quality (DDQ-N) - Stabilized deep drawing quality products boast the highest quality in terms of workability. It is suitable for automotive parts that require complicated treatment such as front fenders or wire. As a non-aging deep drawing sheet made with Al-killed, quality is guaranteed against extreme stretching or straining. * SURFACE FINISH - Dull Finish - Dull finish, which is attained by attaching numerous fine grains onto the steel surface, is often called 'pear-skin finish' or 'egg-shell texture'. The grains are made by steel grit blasted roll. The dull finish is useful in drawing because lubricant oil can be evenly spread over the entire surface, thereby reducing the possibility of friction. The fine grains also help boost paint adherence and extend the steel life span of the steel. - Bright Finish - Bright finish presents high-quality roughness that is optimal for decorative purposes. The sheet surface is rolled with fine polished rolls. * EDGE - Mill Edge - Edges produced by trimming hot rolled coil during the pickling process, prior to cold rolling. - Slit Edge (Trimmed Edge) - Edges produced by shearing or slitting during the cold rolling process. * OILING Sheet that is processed with the final step being the application of oil to the surface; usually intended to provide protection from rusting during shipment and storage. The oil may also serve to assist in the subsequent fabrication process, but this is not usually the main purpose. We deliver its steel products either oiled (heavy, general or light, dos oiling, powdering) or un-oiled. * Brand Name : DONG-BU STEEL, UNION STEEL * Place of Origin : South Korea * Thickness : 0.30 mm ~ 3.20 mm * Width : 600 mm ~ 1250 mm * Min. Order Quantity : 20 ~ 25 MT / one 20ft container * Price : FOB Busan(negotiation with Mills) + sea freight + commission + insurance premium * Payment Term : T/T advance 20%, L/C at sight, L/C 90 days from B/L date * Delivery Time : 45 ~ 60 days from L/C or Mill's option. export standard steel packing - coil : horizontal, vertical - sheet : according to customer's order.
We can supply steel for Green / White boar manufactured by UNION STEEL, DONG-BU STEEL, POSCO C&C. And we have our own steel coil center, we can offer according to your reqiurement size.(sheet or coil) * CHARACTER - Minimizing contamination - Easy write (smooth surface) - Easy clean * SURFACE - PET FILM - GRID * Brand Name : POSCO C&C, DONG-BU STEEL, UNION STEEL * Place of Origin : South Korea * Thickness : 0.30 mm / 0.40 mm * Width : 890 mm / 1190 mm * Min. Order Quantity : 20 MT (individual inquiryfor under M.O.Q) * Price : FOB Busan(negotiation with Mills) + sea freight + commission + insurance premium * Payment Term : T/T advance 20%, L/C at sight, L/C 90 days from B/L date * Delivery Time : 45 ~ 60 days from L/C or Mill's option. Export standard steel packing - coil : horizontal, vertical - sheet : according to customer's order.
We select only the best products from our domestic manufactures to export to over 10 countries worldwide including US, Australia, Canada and Japan. At this point, we are seeking reliable distributors/business partners in Canada. We've been exporting to the top manufactures and distributors in the aforementioned countries and the relationships with our long-term business partners have proved our commitment to superior quality of the products and services. It can be also custom made.
We offer a wide range of wire rope and gac such as 6x7+fc, 7x7, 6x12+7fc, 6x19+fc, 7x19, 6x24+7fc, 6xfi(25)+fc, 6xws(26)+fc, 6xfi(25)+iwrc, 6xws(26)+iwrc, 6xs(19)+fc, 6xw(19)+fc, 6xs(19)+iwrc, 6xw(19)+iwrc, 19x7, 7x7x7, 7x7x19 and all types of stainless products. Order no, length, diameter, origin, reel no.
1.Material: Cold-drawn steel wire, with hooked ends. 2.Conformance: ASTM A 820 3.Tensile Strength: Minimum 900 MPa ~ 1200Mpa 5.Fiber Length: 30, 35, 50, 60 mm 6.Equivalent Diameter: 0.5mm ~ 1.0 mm 7.Appearance: Bright and clean wire. Bundled(glued). Package: 20kg/1000kg.
Steel plates.
Steel coils.
Cold rolled steel sheets.
It depend on the buyer's request Sea worth packing
Titanium button 1. This is an excellent price competitiveness. (Existing titanium products, 50% or less) 3. The world's first All pure titanium Button 4. New creation. 5. The temperature is good protection. 6. Organism Suitability Material 7. Bio-compatible, Bio-activity material 8. Immortality 9. Enable to realize colors on the surface. 10. Hgh Strength / Light weight / Corrosion 11. Desistance Strength: Twice of the iron, 6 times of the aluminum 12. Weight: 60% of iron and stainless 13. Superior Corrosion Resistance: Titanium has created a natural Multiple-coated membranes (NMCM) with chemical reaction in atmosphere. And, If the NMCM is hurt, it will reproduce for high endurable 14. Implement a variety of design 15. Mass production 16. Automated production 17. Excellent price 18. Manufacturing technique New technology TMIM: titanium Mult Injection Molding 19. 3 D image, the product can be manufactured. 20. Good temperature characteristics. Order: Order a variety of sizes order Price: FOB Incheon / Consultation About Us - Certificate of NET (NET : New Excellent Technololgy) - Company : MTIG Co., Ltd. - Homepage : www.mtig.co.kr / www.donacelli.com / www.swanee.co.kr - CEO : Young-suk, park - PH, D. (Business Doctor) - Phone : 82-2-540-3617 - Fax : 82-2-540-3616 - Email : ceo@mtig.co.kr / parkys@kbs.co.kr - Head Office : 2F, Nonhyeon-dong 268-2, Gangnam-gu, Seoul, Korea. 135-833 - Factory : 686-5, Seokpo-ri, Jangan-myeon, Hwaseong box
1. Regarding of stainless strip in coil, we are very specializing in csp, b/a (cold strip for spring - hard tempered) -1.4310(aisi301), 1.4301(aisi304), 1.4307(aisi304l) and ep11(1% nickel). ** thickness : 0.07mm ~1.50mm ** width : 7mm ~ 400mm 2. Now, we would like to introduce our new substitute item of aisi 301. Our new item is a sk-5 (t/s 2000 ~ 2400n/mm2 - for power spring) for seat belt, clock and vacuum cleaner spring. We already developed and tested the item with posco We are sure that you will be satisfied with our quality. ** thickness for power spring : 0.10mm ~0.40mm ** width : 7mm ~ 290mm ** t/s : min 2, 000n/mm2 ** thickness for gerneral application : 0.50mm ~ 1.70mm ** width : 30mm ~ 400mm ** soft tempered : hv190 max, hard tempered : hv260 max
Collecting place of product :copper and brass factory. -.Chemical component(%) -.Cu = More than 15% Packing= more than 1ton/per bag 20TONS/20FT
Aluminum sheet 1.Aluminum sheet 1)alloy : 1000 series / 3000 series / 5000 series / 6000 series 2)temper : upon customers request 3)thickness ( sheet and coil ) Not for anodizing: min 0.15mm For anodizing: 0.3mm ~ 4.8mm 4)width Not for anodizing: 400mm ~ 1, 800mm For anodizing: max 750mm 5)length ( sheet ) Not for anodizing: max 5, 000mm For anodizing: max 3, 800mm 6)circle Thickness: 0.5mm ~ 4.8mm Diameter: 160mm ~ 680mm 2.Aluminum composite panel 1)thickness: 4mm (standard), 3~6mm available upon customers Rquest. 2)width : 1020mm / 1250mm / 1575mm 3)length : max 5000mm is recommended 4)color : 25 standard colors 5)the details, such as color chart, mechanical properties, fire safety, general property etc will be informed/dispatched as per your request
Copper scrap We are looking for credible suppliers of copper scraps and brass scraps from all over the world. If you can provide us with the copper and brass scraps regularly and continually, please contact to us with sincere informations about your company, quantity, its kinds, its photoes that you own presently. We are looing forward to your favorable and rapid reply. Export standard packing
Iron ore Iron ( fe )---64.5% min. On natural wet base Size; 100% 0-10 mm by break bulk
Zinc ore concentrate Material: lead concentrate and zinc concentrate Quantity: lead , mt/year , mt/month. Zinc , mt/year , mt/month. Quality: lead concentrate
Hardened & tempered strip steel Dimension (mm) Thickness 0.3mm to 2.5mm Width : 2.8mm to 260mm The strips are careful packed on skids in corrugated board boxes or wooden boxes and strapped with steel band.
Steel plate 1. G-70 (roof tile type steel plate) Specification : effective width :700mm, thickness 0.4mm 2. S-47 (slate type steel plate) Specification : effective width :750mm, thickness 0.4mm 3. V-115 Specification : effective width :1000mm, thickness 0.4mm Sr-102 Specification : effective width :1000mm, thickness 0.4mm