In automotive suspension, a control arm, also known as an A-arm, is a hinged suspension link between the chassis and the suspension upright or hub that carries the wheel. The inboard (chassis) end of a control arm is attached by a single pivot, usually a rubber bushing. It can thus control the position of the outboard end with only a single degree of freedom, maintaining the radial distance from the inboard mount. Although not deliberately free to move, the single bushing does not prevent the arm from moving back and forth; this motion is constrained by a separate link or radius rod. This is in contrast to the wishbone.
Stabilizer links act as components of auto suspensions, connecting several other parts that take much of the punishment as you pass over potholes and other road imperfections. Modern cars use segmented suspensions. Stabilizer bars, or sway bars, have stabilizer links. The stabilizer bar holds pairs of wheels connected, while stabilizer links hook this larger piece with arms that go up to the wheels themselves. Ball-joint connections enable turning and suspension travel.
In an automobile, ball joints are spherical bearings that connect the control arms to the steering knuckles. They are used on virtually every automobile made and work similarly to the ball-and-socket design of the human hip joint. A ball joint consists of a bearing stud and socket enclosed in a casing; all these parts are made of steel. The bearing stud is tapered and threaded, and it fits into a tapered hole in the steering knuckle.
Tie rod ends are the crucial meeting point between a vehicle's steering rack and steering knuckle. The rod end not only transmits the force from the steering rack to the wheels, but it also provides a pivot point for the steering to maintain its geometry. The rod end typically features a round end and has a threaded bolt perpendicular to it that is inserted into the knuckle. The rounded end also houses bearings that allow the bolt to pivot freely; this end is covered by a protective boot to keep dirt out. This design may look uncomplicated to the naked eye, but because it is so crucial to handling, the tolerances involved are very tight.
Equipped with a rack & pinion steering system as the steering gear mechanism. The steering moment from the steering wheel is transferred to the running wheels through the rack end. It absorbs road conditions and vibrations in order to stabilize vehicle handling. A ball joint is set at vehicle's side in order to cope with updowns of running wheel and turning motion from steering wheel. Connected to outer tie rod end it transfers steering moment it has wider pivot angle to cope with updowns and back-forward motions. By turns of rack end ball stud it can adjust toe-in alignment.
A control arm, commonly referred to as an A-arm, is a hinged suspension link used in automobile suspension that connects the chassis to the hub that supports the wheel. A control arm's inboard (chassis) end is connected to the body by a single pivot, which is typically a rubber bushing. Thus, it may maintain the radial separation from the inboard mount while controlling the position of the outboard end in just one degree of freedom. The arm can move back and forth even if it is not intended to do so; nevertheless, this motion is restricted by a different link or radius rod.
Stabilizer links serve as essential sections of car suspensions, joining a number of other components that bear the brunt of the stress when you drive over potholes and other ruts in the road. Segmented suspensions are used in modern vehicles. Stabilizer links are found on sway bars or stabilizers. While stabilizer links hook this larger component with arms that extend up to the wheels themselves, the stabilizer bar keeps pairs of wheels together. Ball joint connections allow for suspension travel and turning.
Ball joints are spherical bearings that combine the control arms and steering knuckles in a car. They function similarly to the ball-and-socket hip joint and are found on almost every car ever produced. All the components of a ball joint are constructed of steel and include a bearing stud, a socket, and a casing. The steering knuckle's tapered hole accepts the threaded and tapered bearing stud.
At the point where the control arm connects to the vehicle frame, the bushing pressed into the control arm eliminates vibration and noise. For a smooth ride and exceptional endurance, the thick rubber bushing strikes the perfect mix between elasticity and rigidity.
The critical interface between a car's steering rack and steering knuckle is the tie rod end. The rod end serves as a pivot point for the steering to retain its geometry in addition to transferring force from the steering rack to the wheels. The rod end normally has a round end and a threaded bolt that is put into the knuckle perpendicular to it. The rounded end also contains bearings that permit the bolt to revolve freely; a boot covers this end to prevent dirt from getting in. While this design may appear simple at first glance, the tolerances required are extremely fine because of how important it is to handling.
The critical interface between a car's steering rack and steering knuckle is the tie rod end. The rod end serves as a pivot point for the steering to retain its geometry in addition to transferring force from the steering rack to the wheels. The rod end normally has a round end and a threaded bolt that is put into the knuckle perpendicular to it. The rounded end also contains bearings that permit the bolt to revolve freely; a boot covers this end to prevent dirt from getting in. While this design may appear simple at first glance, the tolerances required are extremely fine because of how important it is to be handling.
Ball Joint Assembly Line, since we started our business as SJ Tech in July of 2017.
Torque Test Machine, since we started our business as SJ Tech in July of 2017.
Packing line, since we started our business as SJ Tech in July of 2017.
CNC Machine, since we started our business as SJ Tech in July of 2017.
Calking-Machine [Stabilizer Link], since we started our business as SJ Tech in July of 2017.
Made year: 2007 Jib: 80m Max.capacity: 20 ton Hoist winch : 65 KW FU Mast: 1pc x 12.42m base mast +10 pcs x 5.8m mast External climbing cage complete set: included Counterweights for full jib MK Tower Co., Ltd is a leading enterprise in Koreaâ??s tower crane industry, specializing in the rental, export, and import of used tower cranes and tower crane parts. The rental service and international distribution of high-quality construction machinery from the basis of our business activities. In addition to the regional market, which is especially important for renting, we pay special attention to the global machine trade. Founded in 2000, we show our gradually steady improvement in export and import sales figures over time and smoothly supply our clients with a plentiful supply of used tower cranes. Over the 20 years, the substantial amount of our selling products are exported all over the world, especially to the middle east countries and other countries. For many consecutive years, we have been the designated distributor for the Italy Recom and Terex Comedil in South Korea. We convince customers from well worldwide by the quality of our machines and the reliability of our commercial and technical purchase. In particular 2018, we exported a variety of tower cranes such as Liebherr, Potain, Comedil, Peiner, Favco. Our current representative tower cranes are as below: LIEBHERR : 63LC, 73EC-B, 90LD, 91EC, 100LC, 132HC, 154HC, 220HC, 290HC, 224HC-L, 315HC-L, 500HC-L, 630HC-L, 280EC-H, 280EC-B12, 500HC, 550EC-H20, 800HC, 1250HC POTAIN : H30/23C, H30/30C,K30/30C, MC310K12, MC310K16, MCT385, MC475, K40/27C, K5/50C, MD500, MD1100, MR150, MR220, MR225, MCR225A, MCR295, MR418, MR605, MR608, MR615, MR618 COMEDIL : CTT331, CTT321, CTT561, CTT721, CTL130, CTL180, CTL250, CTL260, CTL340, CTL400, CTL430, CTL630 PEINER : SK315, SK565, SK575, SN406, MK1250 COMANSA : 21LC290, 21CJ290 FAVCO : 120RX, M220D, M380D, M440D, M760D JOST : JL216-16, JL416-24 BKT : BK290, BK569, BN208, BN280, BN405 If you are seeking for having a long-term and good cooperative business relationship with a tower crane supplier/exporter, please do not hesitate to contact us. Please be informed us the crane model which you are interested in, MK Tower Co., Ltd will always be glad to assist you! Thank you sincerely, Best regards, Charles Eom MK Tower Co., Ltd. #2122, Jamsil Rezion Bldg.,22-5, Bangi-dong, Songpa-gu, Seoul, South Korea Tel: +82-2-403-7169 Fax: +82-2-400-6617 Mobile: +82-10-3773-5238 Yard & Factory: 271-1, Sanyang-ri, Yul-myeon, Icheon-si, Gyeonggi-do, South Korea Tel: +82-31-643-5238
I'm CKSONG, CEO of SEIL CO., LTD Our company is exporting and growing mainly in PCB, PCB assembly, electronics, plastic resin, injection, and mold business Our-centered PCB, PCBA, plastic resin, and injection products have advantages in quality and reliability that have been verified during delivery to large Korean companies such as Samsung and LG. We hope that our reliable quality products and constant desire to pursue a sustainable business will meet with you to become a mutually developing business partner to pioneer the global market It is supplying difficult quality review and price review procedures to mid-sized and large Korean companies such as Samsung and LG at an annual amount of 50 to 65 billion KRW In addition, we are constantly growing as we are winning orders with global companies overseas, and we can handle a wide range of plastic resins (PE, PP, PVC, PC, ABS, EVA, etc.), customized injection molding, and mold work We hope to make a positive business by contacting you from time to time by e-mail after receiving your requirements such as your desired specification, material property, and drawing file. Thank you
We are selling Turkemnistan Origin lump granuulated suplhur 99.95% purity Turkmenistan standard TDS127.1-93 Packed in Big Bag -1 MT FOB Port Banderabas
The Dumbbell style elements, with the enlarged cold ends, were one of the earliest designs of the heating elements, which were originally made oversized to increase the cold end cross section, lowering electrical resistance so as to lower the operating temperature of the cold ends. Following should be provided when inquiring or ordering DB (Dumbbell) Silicon Carbide Heating Elements: Type: DB Outer Diameters: of the Hot Zone (D1) and of the Cold Zone (D2), mm Length: of the Heating Section or the Hot Zone, HZ, mm Length: of the Cold Zone, CZ, mm Overall Length: OL, mm Example: Type DB, D1/ D2=18/28mm, HZ=300mm, CZ=350mm, OL=1000mm, Resistance 1.70�© Specified as: SPK DB18/28/300/350/1.70