LV-17 Y-Strainer + Basic Design: Manufacture Standard + Body Wall Thickness: ASME B16.34 + Pressure Rating: ASME B16.34 + Face To Face: Manufacture Standard + Body Bore Size: ASME B16.34 + Marking System: MSS-SP-25 + End Connection: - ASME B16.5(Raised Face) / - ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Flange Size: +ASME B16.5 for 24" & below size +ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) +API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 + Finishes For Contact Faces of Flanges: +ASME B16.5 or MSS-SP-6 + Option: - Drain Plug(ASME B16.34 / MSS-SP-45) - Threads(ASME B1.20.1)
Feature: Segment Ball Control Valve is suitable for conveying and transferring fluid with powder. Application: - Pulp and Papermill - Slurry line in Power plant and Steel mill - Particle facility lines in Powder transfer and Air transport facility - Oil refining high viscosity fluid transfer line - Waste water and Sewage treatment facility Characteristics: 1- It can be used in water treatment devices containing substances (sludge, etc.) that are difficult to be used with conventional ball valves 2-As there is no cavity in the inner space of the body, there is no fluid stagnation and hence the inside is hygienic 3-It is possible to make an Eccentric construction that allows for a fluid cutting effect and excellent air-tightness 4-The Quarter-turn type and V-port flow control create equally proportional flow curves 5- It is more compact than the globe control valve and has a lower torque than the ball valve as the stem structure of upper and lower design for easier operation with smaller actuator 6- It is more economical in terms of price because it has excellent performance against the fluid that is not applied to the globe control valve and has a high CV value that allows a lot of flow control
LV-13 Ball Valve + Basic Design: BS 5351 / API 608 / API 6D + Body Wall Thickness: ASME B16.34 / ISO 17292 / BS 5351 + Pressure Temperature Rating : ASME B16.34 +Face To Face: ASME B16.10 / API 6D + End Connection : - ASME B16.5(Raised Face) / ASME B16.11(Socket Weld) / - ASME B1.20.1(NPT) ASME B16.25(Butt Weld) / - ASME B16.34(Ring Joint) + Body Bore Size: ASME B16.34 / API 6D + Flange Size: - ASME B16.5 for 24" & below size - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing: - API 598 or ISO 14313(API 6D) / BS EN12266 / API 607, 6FA(Fire Test) + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Surface Quality Visual Method: MSS-SP-55 + Sour Service: NACE MR-01-75 or MR-01-03 + Marking System: MSS-SP-25 + Option: Locking Device - Live Loading(Belleville Spring)
LV-14 Ball Valve + Basic Design: BS 5351 / API 608 / API 6D + Body Wall Thickness: ASME B16.34 / ISO 17292 / BS 5351 + Pressure Temperature Rating: ASME B16 34 + Face To Face: ASME B16.10 / API 6D + End Connection: - ASME B16.5(Raised Face) / ASME B16.11(Socket Weld) / - ASME B1.20.1(NPT) / ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Body Bore Size: ASME B16.34 / API 6D + Flange Size: - ASME B16.5 for 24" & below size - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 or ISO 14313(API 6D) / - BS EN12266 / API 607, 6FA(Fire Test) + Finishes For Contact Faces of Flanges: - ASME B16.5 or MSS-SP-6 + Surface Quality Visual Method: MSS-SP-55 + Sour Service: NACE MR-01-75 or MR-01-03 + Marking System: MSS-SP-25 + Option: Locking Device + Live Loading(Belleville Spring)
LV-16 Forged Steel Gate Valve + Basic Design : API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness : ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face : API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
LV-16 Forged Steel Check Valve + Basic Design: API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness: ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face: API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
LV-16 Forged Steel Ball Valve + Basic Design: API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness: ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face: API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
MV-26(L) Wafer, Lever +Type of Body: Wafer +Flange: JIS 5K/10K,ANSI 150LBS,PN 6/10/16(BS 4504) +Operator: Lever +Material : - Body : Cast iron, Cast Steel, Ductile iron, Stainless Steel - Disc : Stainless steel, Aluminium bronze - Seat : EPDM, NBR, PTFE, SILICONE - Stem : Stainless Steel + OPTION : - Lug body - Flange body
MV-26(G) Wafer, Gear +Type of Body: Wafer +Flange: JIS 5K/10K, ANSI 150LBS, PN 6/10/16(BS 4504) +Operator: Worm Gear + Material:: - Body : Cast iron, Cast Steel, Ductile iron, Stainless Steel - Disc : Stainless steel, Aluminium bronze - Seat : EPDM, NBR, PTFE, SILICONE - Stem : Stainless Steel + OPTION - Lug body - Flange body
MV-26 Flanged, Lever
AVP-14(D,S) AL, Pneumatic +Type of body: Wafer +Flange: JIS 10K +Face to face dimension: ISO 5752 +Top flange dimension: Bolt hole ISO 5211 +Max. Pressure: 10 kg/cm2 (0.98MPa) + Material : - Body : Aluminum Alloy Diecast (ADC-12) - Disc : Stainless Steel (304, 316) - Stem : Stainless Steel (304, 316) - Seat : EPDM, NBR +Max. Temperature : - EPDM (-20 c to +120 c) - NBR (-10 c to +80 c) + Test : - Body = 15 kg/cm2 (1.47MPa) - Seat = 11 kg/cm2 (1.08MPa) + Light weight & compact +OPTION - Long bonnet
AVE-15 H/P 10K, Electric + Type of body: Wafer + Flange: JIS 10K/20K, ANSI 150LBS + Face to face dimension: ISO 5752 + Top flange dimension: Bolt hole ISO 5211 + Stem dimension: Square drive to ISO 5211 + Double eccentric (offset) disc + Material : - Body : Ductile iron, Cast steel - Stainless steel (304, 316) - Disc : Stainless steel (304, 316 & 316L) - Stem : Stainless steel (304, 316, 316L & 630) - Seat ring : PTFE, RTFE, Metal + Vacuum equipment (up to 10-5 Torr) + Max. Temperature : - PTFE (-60 c to +160 c ) - RTFE (-60 c to +200 c ) - Metal (-120 c to +450 c ) +OPTION - Lugged body - Long bonnet - EXA : Explosionproof Eexd�BT4 (RE-010~060) - WTA : Watertight Enclosure (IP68) - PCU : Proportional Control Unit (in/out, 4~20mA, 0-10VDC) - PIU : Potentiometer (1K~10KΩ) - CPT : Current Position Transmitter (output 4~20mA) - DCM : 24VDC Motor (RE-006~060)
LV-03 Globe Valve + Basic Design: BS 1873 + Body Wall Thickness: API 600(Heavy Wall) + API 603(Light Wall), ASME B16.34 + Pressure Rating: ASME B16 34 + Face To Face: ASME B16.10 / ISO 5752 / BS2080 + End Connection: - ASME B16.5(Raised Face) - ASME B16.25(Butt Weld) - ASME B16.34(Ring Joint) + Body Bore Size: ASME B16.34 + Flange Size: ASME B16.5 + Inspection And Testing : API 598 / Sour Service(NACE MR 0175 or MR 0103) + Surface Quality Visual Method : MSS-SP-55 + Finishes For Contact Faces of Flanges : ASME B16.5 or MSS-SP-6 + Marking Standard : MSS-SP-25 + OPTION * Drain Plug(ASME B16.34 / MSS-SP-45), Threads(ASME B1.20.1) * Locking Device * Live Loading(Belleville Spring) * Jacketed(Semi & Full) * By-pass Piping & Valve(MSS-SP-45)
LV-04 Globe Valve + Basic Design: BS 1873 + Body Wall Thickness: API 600(Heavy Wall) + API 603(Light Wall), ASME B16.34 + Pressure Rating: ASME B16 34 + Face To Face: ASME B16.10 / ISO 5752 / BS2080 + End Connection: - ASME B16.5(Raised Face) - ASME B16.25(Butt Weld) - ASME B16.34(Ring Joint) + Body Bore Size : ASME B16.34 + Flange Size : ASME B16.5 + Inspection And Testing : - API 598 / Sour Service(NACE MR 0175 or MR 0103) - Surface Quality Visual Method : MSS-SP-55 - Finishes For Contact Faces of Flanges : ASME B16.5 or MSS-SP-6 + Marking Standard : MSS-SP-25 + OPTION * Drain Plug(ASME B16.34 / MSS-SP-45), Threads(ASME B1.20.1) * Locking Device * Live Loading(Belleville Spring) * Jacketed(Semi & Full) * By-pass Piping & Valve(MSS-SP-45)
LV-08 Dual Plate Check Valve + Basic Design: API 594 + Body Wall Thickness: API 594 + Pressure Rating: ASME B16.34 + Face To Face : API 594 or API 6D + Body Bore Size : ASME B16.34 + Flange Size : - ASME B16.5 for 24" & below size / - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing : API 598 / Sour Service(NACE MR 0175 or MR 0103) + Surface Quality Visual Method : MSS-SP-55 + Finishes For Contact Faces of Flanges : ASME B16.5 or MSS-SP-6 + Marking Standard : MSS-SP-25
LV-12 Butterfly Valve + Basic Design: API 609 / MSS SP 67 + Body Wall Thickness: API 609 +Pressure Rating : ASME B16.34 +Face To Face: API 609 / ISO 5752 / MSS SP 67 +Body Bore Size: ASME B16.34 + Flange Size : - ASME B16.5 for 24" & below size / - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing : - API 598 / Sour Service(NACE MR 0175 or MR 0103) + Surface Quality Visual Method : MSS-SP-55 + Finishes For Contact Faces of Flanges : ASME B16.5 or MSS-SP-6 + Making Standard : MSS SP 25
LV-11 Butterfly Valve + Basic Design: API 609 / MSS SP 67 + Body Wall Thickness: API 609 + Pressure Rating: ASME B16.34 + Face To Face: API 609 / ISO 5752 / MSS SP 67 + Body Bore Size : ASME B16.34 + Flange Size : - ASME B16.5 for 24" & below size / - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing : - API 598 / Sour Service(NACE MR 0175 or MR 0103) + Surface Quality Visual Method : MSS-SP-55 + Finishes For Contact Faces of Flanges : ASME B16.5 or MSS-SP-6 + Marking Standard : MSS-SP-25
LV-15 Knife Gate Valve + Basic Design: MSS-SP-81 + Body Wall Thickness: ASME B16 34 + Pressure Temperature Rating : ASME B16.34 + Face To Face: MSS-SP-81 + End Connection: ASME B16.5(Raised Face) + Body Bore Size: ASME B16.34 - Flange Size : ASME B16.5 or MSS-SP-81 + nspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16.5 or MSS-SP-6 + Surface Quality Visual Method: MSS-SP-55 + Marking System: MSS-SP-25
LV-16 Forged Steel Globe Valve + Basic Design: API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness: ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face: API 602 + Body Bore Size: API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
LV-18 B-Strainer + Basic Design: Manufacture Standard + Body Wall Thickness: ASME B16.34 + Pressure Rating: ASME B16.34 + Face To Face: Manufacture Standard + Body Bore Size: ASME B16.34 + Marking System: MSS-SP-25 + End Connection: - ASME B16.5(Raised Face) / - ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Flange Size: + ASME B16.5 for 24" & below size - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 + Finishes For Contact Faces of Flanges: +ASME B16.5 or MSS-SP-6 + Option: - Drain Plug(ASME B16.34 / MSS-SP-45) - Threads(ASME B1.20.1)
