Single Phase to 3 Phase Converter, MY-PS-0.5 Model, Suitable for 0.25HP(0.2Kw) 0.75 Amps 200-240V 3 Phase Motor, DPS Should Be Used for One Motor Only, Input: 220V, Output 200V-240V, Digital Type DPS is a device that runs a 3 phase motor from single phase power and is a digital type phase converter that can be used for various machines at your workshop and home. We produce a wide range of product, so please choose the appropriate horsepower DPS according to the installation and specification and application. - Features of DPS 1. DPS can run 3 phase motor from single phase 2. Digital Type Phase Converter 3. Excellent start-up torque 4. Efficiency is excellent versus other phase converter 5. Small size & easy to install 6. Low failure rate 7. Keeps out dust, moisture, and heat due to the sealed type 8. Designed to be non-flammable 9. Does not make any high frequency 10. Lower power consumption
Filtration U/f, ro Piece
Renewable energy, Battery, ESS, Prefabricated House
We provide BTS character Cables if you are looking for BTS item or unique 8-pin cables, we can supply please contact us, we can provide our best pricing. BTS OFFICIAL Character TinyTAN MFI Certified Device Cable - Fast charging speed & Sync and Fabric-based cables protect lines from twisting - Use to MFI Certified Device series - BTS character licensing products were made through official contracts with Hybe Entertainment. - BTS The TinyTAN characters of RM, JIN, JIMIN, SUGA JHOPE, V, and JUNGKOOK are also being promoted on social media. Look it up and join us. Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
We provide BTS Character Cables(3in1) If you are looking for BTS item or unique 3in1 cables, we can supply Please contact us, we can provide our best pricing. BTS OFFICIAL Character TinyTAN MFI Certified, Type C, Micro USB Cable - Fast charging speed & Sync and Fabric-based cables protect lines from twisting - Very important - Type C or MFI Certified cable must be plugged into the microUSB for charging, Simultaneous charging not possible. - BTS character licensing products were made through official contracts with Hybe Entertainment. - BTS The TinyTAN characters of RM, JIN, JIMIN, SUGA JHOPE, V, and JUNGKOOK are also being promoted on social media. Look it up and join us. it can separate into 3 type and use them in various ways. 8-pin cable, C-type cable, Micro cable but Simultaneous charging not possible.
We provide BTS PopSockets. If you looking for BTS item or unique Popsockets, Grip, we can supply. Please contact us, we can provide best pricing. Offers a secure grip so you can text with one hand, snap better photos, and stop phone drops Functions as a convenient stand so you can watch videos on the fly Allows for hands-free use with the PopSockets mount Available in a broad range of styles and materials PopSockets grip sticks to smooth and hard cases. Will not stick to SILICONE, HIGHLY TEXTURED CASES, and many SOFT cases. Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
* space-care system removing harmful bacteria(including Corona virus) and stink * simply activating machine with inserting ample which is certified by FDA and has superior function for deodorization and sterilization [advantage] : Ultrasonic fine particle sparying type / simple installation / easy manipulation/ low noise / portable [smell control type] : by removing 94% of causative organism [function] : way of killing harmful bactery by itself [usage] : School, public office, hospital, hotel, lcooking space, restroom, inside elevator, car, office....every indoor space [raw material (ample)] : FDA certified (registeration No. 74651-0001-1) [Certification] : both the hardware (machine) and the ample are certified [Safety Certification] : Korea Environmental Industry Technology Institute Report of compliance with safety standards : HB20-13-0492 * sample : made in Korea / hardware : made in China
[ CHARACTERISTICS ] Accurate heat consumed under heat load is measureable * Display of various information : Heating energy / cooling energy Instantaneous heat and accumulated quantity, temperature , instantaneous flow rate, accumulated flow rate, etc. â?¢ Easy data transfer function through MODBUS RS 485 [ SPECIFICATIONS ] * Display - DC Type : Touch Screen Color Graphic LCD - AC Type : 2 X 20 Characteristic LCD with El Backlight or VFD * Temperature - Operating temperature: 0 ~ 60 â??â?? - Storage temperature: 25 ~ 70 * Power : 85 ~ 264 V AC / 12 V DC * Case dimension : (W) 150 mm X (H) 180 mm X (D) 50 mm * Input - Frequency Range: 0 Hz to 5 kHz / K factor Range: 0.0001 to 50,000.000 (Pulse / Units) - RTD Signal Type: Open Collector, Voltage or Current Pulse * Output - Analog Function: 4 ~ 20 mA calorific output / accuracy: 0.1% - Pulse Output #1 (Energy Total) Output: Open Collector transistor will sink 50 mA max - Pulse Output #2 (Flow Total) Pulse width: 5 ms , 10 ms , 100 ms , 200 ms * Communication - Kinds RS 485 MODBUS - Baud Rate 1200 ~ 19,200 BPS - ID code 4 Multi Point communication, specific address programmable * Display unit - Energy kWh, J , cal , BTU - Volume m3, L * Data logging - Logging interval : Day, hour and second can be set - Logging information : Volume Total, Volume Rate, Energy Total, Energy Rate, Temperature, Date & Time - Internal memory 12 months (Logging interval: 1 minute storage, 1 year storage) For more details on quality Korean flowmeters, please feel free to visit
[ CHARACTERISTICS ] Various inputs such as flow meters and pressure gauges. Real time communication through Modbus, BlueTooth , etc. 2G Data logging â?¢ Convert MODBUS or RS232 input to HART Item [ SPECIFICATIONS ] * Display 3.5 inch (320 x 240) Touch Screen Color Graphic LCD * Power : 90 ~ 240 V AC (Free Volt) * Output : RS 232 ASC DATA, HART Communication, RS485 MODBUS, 4~20 mA Output(24bit) of Flow Rate, MODBUS TCP/IP Ethernet(LAN), BlueTooth Wireless, 2 GB Memory, Memory Data Download USB Memory, Total Pulse Output(TTL), DC 24 V Power (0.6 A) * Input : RS 232 ASC DATA, HART Communication RS 485 MODBUS Communication 4 ~ 20 mA * Protection class : IP 65 * Piping pressure input 24 V DC pressure gauge drive and display * Size : (W) 150 mm X (H) 180 mm X (D) 50 mm
This item will be shipped to Seoul, Korea. We share the available quantity with a price according to the schedules. 1) 12th on April: 20,000 -> sold out 2) 22nd on April: 20,000 -> Booked (but, there is a possibility of cancellation.) If the buyer will cancel their order, we can give you information by email or whatsapp. unit price: $8/1pcs, Advanced T/T 3)15th on May: 20,000 unit price: $5.5/1pcs, Advanced T/T bank transfer Product data sheet http://file2.dzsc.com/product/18/09/02/1140443_111
30W-ICS Repeater: Interference Cancellation System (ICS) Repeater is a personal network enhancement device with inbuilt Interference Cancellation System ICS Repeater system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
A DAS is a system of managed hubs and remote antennas that distributes a wireless signal to a series of connected indoor or outdoor multi-band, multi-technology radio heads. ... A main hub takes that signal, digitizes it, and distributes it to other hubs and radio heads via a high-bandwidth fiber optic network
Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction. Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc. Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.
The RF front-end stage of the communication system is composed of passive devices such as a filter, a duplexer, a power combiner, an RF connector, and an RF switch. These passive devices are designed to maintain the possible linear characteristics in the operating range, but they have practically nonlinear characteristics. Passive intermodulation occurs when two or more different frequencies are used as inputs to a passive device having nonlinear characteristics. This phenomenon is called Passive IM (PIM). Intermodulation (PIM) signals are added as unwanted noise to an uplink band in a mobile communication system, which is a major noise source that deteriorates the signal to noise ratio (SNR). Therefore, the intermodulation (PIM) signal, which may cause a lot of losses in terms of operation, maintenance, and frequency use efficiency of the mobile communication system equipment, should be removed. A system for removing an intermodulation (PIM) signal existing in an uplink band of a mobile communication system is called a PICS (Passive Intermodulation Canceller System).
The Single Band LTE Repeater is a cell phone signal booster system made up of antennas, cable and a signal amplifier that takes an existing cell signal, typically found outside your home or office, amplifies the signal and then broadcasts it to an inside area that has a weak or no signal.In order for the system to work, there must be an existing, stable outside signal for the system to receive and amplify It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Dual Band LTE Repeater also known as cell phone repeaters were developed to address the two factors that cause poor cell phone reception. They're designed to amplify a weak outside signal and bypass any obstructions to provide a strong inside signal to an area that was originally lacking.The system works by mounting an outside antenna in a location that currently has signal, which is typically on the roof. The signal is passed from the outside antenna, by a cable to a signal amplifier inside the building. Once the signal is amplified, it is then sent to an inside antenna, where it is broadcast out to the area which needs better reception. The system also works in reverse, with the signal from your phone being amplified and broadcast back to the tower, ensuring strong, two-way communication.
Dual-Band LTE Repeater is used to improve network coverage of mobile phone in home and offices.Dual-Band LTE Repeater is a complete network coverage solution for areas which face problems like disturbance in call, call drops and less network signals. Dual-Band LTE Repeater is placed at a network rich area from where it catches signals from the nearest tower and these signals are transmitted to the area facing the signal problem.It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
5W-ICS Repeater: The 5W High Power 2G 3G 4G Cell Booster Long Distance ICS Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). The ICS Repeater (Interference Cancellation System) is a new kind of single-band RF repeater that can automatically detect and cancel the interference signals caused by oscillation of RF feedback between the Donor and Coverage Antennas in real time by adopting DSP (Digital Signal Processing) technology. It can continuously and stably cancel the interference signals and be adapted to any changes in the surrounding RF environment.
1. It has excellent resistance against chemicals 2. It can be used in wide temperature range 3. It is proper to be used for indoor, outdoor or coastal area in harmful enviroment where to be contact with sea water.
