The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications:
Engine Type: 4.6L V8
Horsepower: 250 hp
Steering: Digital Throttle & Shift (DTS)
Starter: Electric
Shaft Length: Available in 25" (X-Long) and 30" (XX-Long)
Power Trim & Tilt: Yes
Fuel System: Electronic Fuel Injection (EFI)
Alternator: 115-amp
Weight: Approximately 600 lbs (272 kg)
Cooling System: Water-cooled with thermostat & pressure-controlled
The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.
We manufacture and produce main faucets and relevant products used in bathrooms
and kitchens. Wonjin Metal Incheon Branch offers high quality products to domestic
faucet business such as DADA, Daelim B&CO, and Kelim, based on long experience.
Wonjin Metal Incheon Branch is now taking more than 65% of market share in Korean
industry of faucets and related products.
1: Feed pipe
2: Trap
3: Angle valve
4: Pop-up
Disposable Face Masks, Face Masks of 50/100 Pack Disposable Mask
[Face Masks]: Mouth Face Mask 3-ply With Elastic Ear loops for Day-to-day protection
[Disposable Masks]: The disposable face mask is made from a supportive and powerful 3-layered fabric for 3-Way filter
[Disposable Face Masks]: Designed for a softer and smoother feel for Breath ability all day long
[Masks]: Universal fitted elastic ear loops for a variety of users for instant protection
[Mouth Mask]: Easy to use--Keep the blue-side outside & nose clip on the upper side.
Virus protection Mask
A. Maximized virus inactivation annihilates viruses on the mask surface within
minutes- 99.99% inactivation of VIRUS BUSTER CAZ material proved by Colorado State Univ.(USA) and Nara Medical Univ.(Japan) labs.
B. Maximized filtration efficiency blocks out infected droplets-VIRUS BUSTER masks have 85~95% filtration efficiency performance.- The filtration efficiency of VIRUS BUSTER masks last constantly for weeks.
C. Minimized pressure drop enables easy breathing
D. Eco friendly & Economic mask must be reusable & washable -Prerequisites to the reusable mask are Self sanitization and long lasting filtration.
The reason why disposable masks can not be reused is not only because the filter efficiency is drastically deteriorated, but above all, the virus on the mask surface survives for weeks to infect the wearer .
-The virus buster mask self sanitize the Covid 19 virus and all the other microbes to provide safe and odorless reuse.
-Payment: By irrevocable, Non- transferable, Documentary L/C at sight.
-No upfront pay: any fees or any charge by seller bears all cost.
-P/bond :seller's bank issues PBG 2% to buyer's bank.
Only,we working for annual orders to serious buyers and their mandate,but we don't work to long chain fake agent or fake broker.
If you interested, direct send us via our e-mail address for your orders of full details.
Weight Measurement Function: By Hours, minutes and seconds unit, Display the status of the usage of liquid gas and it can be used being installed on storage tank or tank lorry and can be carried as a portable measuring instrument.
PC Monitoring Function: As the remained liquid goes below 10% of its capacity, it automatically alarms to supplement liquid gas. Thus, the appropriate time for supplement of liquid gas can be decided on time.
Alarm Function: the liquid remaining of the storage tank is less than 10%, The alarm sound provides information that you can setting the a liquid supply time.
Diversity Of Power Supply: Use the usual 220volt electric, in case of power outage, the built-in battery will supply the charged electricity, in addition built-in battery is operated and available for tank lorry using the car battery.
Option (Printer : additional purchase): Receipt Output Function; Portable thermal transfer printer can use the output value measuring of storage tank and tank lorry without visiting a long measuring place directly by the output as a receipt.
The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact.
2. Explain in detail how the idea would be operated used
The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer,
3. What features do you believe your idea has that makes it unique and appealing?
The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics.
1) Number of Joints for Each Shaft
- In the case where the number of joints is large, a sensation of impact is increased somewhat.
- The case where the number of joints is small is appropriate for golfers with weak swings.
- In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high.
2) Space between Joints
- Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long.
-The kick point goes down toward the tip when the space between the joints in the butt part is long.
- A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased.
3) Structure of Fabric
- Fabric having high elasticity and strength is used, thereby resulting in distinctive performance
4.What need does the idea fulfill?
This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom.
5. Descripbe possible variations of your idea:
The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
The role of the shaft accounts for about 70% of the performance of a golf club, and the weight, strength, torque and kick point of the shaft vary according to the type and intended use of the golf club. To solve problems afflicting a general cylindrical shaft and improve the performance thereof, the present shaft has been developed to have a composite design system. That is, to improve the distance and direction by evaluating the roles of various parts of the shaft, fabric having strength and weight appropriate to the functions of respective parts of the shaft is selected and molded with connecting parts thereof overlapping each other according to the process. At this time, joints are formed on the outer circumference according to the number of parts connecting the fabric. The joint of the present shaft is formed to have a structure similar to that of bamboo. Further, the shaft specifications, according to which the number of joints and spaces therebetween differ, is decided according to a golferí»s ability and tendencies. Thus, when the golfer swings the golf club, each joint performs a function similar to that of an artificial joint. As a result, the head speed achieved by the golfer is increased; the distance is increased by about 20-30 yards by the stabilization of impact (head spot); and the direction is improved by controllingthe torsion of the joint located in the middle of the shaft in the case of an impact.
2. Explain in detail how the idea would be operated used
The inner layer of the shaft is formed of a reinforcement, folded in a single fold or two or more folds,that determines the flex and weight of the shaft so that the direction of the texture of the material repeats in an X arrangement. The middle layer is formed on the outer circumferential surface of the inner layer. To form the first middle layer, 5 divided middle layers are arranged and folded along the axial direction of the shaft so that 4 overlapping joints are formed. A second middle layer is also formed in the same manner as the first middle layer. The outer layer is formed to have a straight angle and be parallel to the axial direction of the shaft on the outer circumferentialsurface of the middle layer and is formed of one cut piece of material folded once, or twice or more, having appropriate strength, elasticity and tensile elastic modulus so that the overlapping joints of the middle layers are not separated by the impact of a swing, and are durable. Then, the shaft is finished by heat-treating it after rolling heat-shrink tape on the outer circumferential surface of the outer layer,
3. What features do you believe your idea has that makes it unique and appealing?
The shaft is manufactured by folding a plurality of divided middle layers, which are different from each other with respect to strength, elasticity and tensile elastic modulus. Meanwhile, when the following factors are considered in combination with each other, it is possible to manufacture a shaft having various characteristics.
1) Number of Joints for Each Shaft
- In the case where the number of joints is large, a sensation of impact is increased somewhat.
- The case where the number of joints is small is appropriate for golfers with weak swings.
- In the case wherethe number of joints is large, the directionality becomes very good and the feeling of impact is close to that of a steel shaft.- In the case where the number of joints is small, the trajectory becomes high.
2) Space between Joints
- Even though the number of joints is the same, a soft feeling is provided to users in the case where the space between the joints in the tip part is long.
-The kick point goes down toward the tip when the space between the joints in the butt part is long.
- A high kick is appropriate for users in the intermediate class or above, and generates a low trajectory, and the rolling distance of the golf ball is increased.
3) Structure of Fabric
- Fabric having high elasticity and strength is used, thereby resulting in distinctive performance
4.What need does the idea fulfill?
This product has been manufactured and sold in Korea, and it is necessary to expose this product to U.S. consumers for access to the U.S. market. Meanwhile, this product acquired certification according to the USGA standard in the U.S.A. and the R&A standard in the United Kingdom.
5. Descripbe possible variations of your idea:
The middle layers may be manufactured after the divided middle layers are cut at an incline rather than at a straight angle, and the durability can be improved by setting the cut inclinations of the first middle layer and the second middle layer in opposite directions relative to each other.
