Find Verified Locomotive Railway Equipments Components Suppliers, Manufacturers and Wholesalers

Mitsubishi MG400 Motor Grader Specifications Main Specifications Blade Width: 3710mm (standard blade width) Steering System: ATC Weight & Loads Operating Weight: 13,100kg Front Axle Load: 3,700kg Rear Axle Load: 9,400kg Dimensions Overall Length: 8490mm Overall Width: 2400mm Overall Height: 3360mm Wheelbase: 5910mm Tandem Wheelbase: 1520mm Ground Clearance: 355mm Engine Manufacturer: MTB Model: 6D22C Rated Output: 110.3kW (150 PS) @ 2000rpm Cylinders: 6 Bore x Stroke: 130 x 140mm Displacement: 11.2liters Hydraulic System Output Pressure: 17.2MPa Oil Flow Rate: 128L/min Transmission Type: DPS Speeds: 6 forward / 6 reverse Max Travel Speed: 45.0km/h (forward), 45.4km/h (reverse) Tires Front: 13.00-24, 14-ply Rear: 13.00-24, 14-ply Performance & Other Features Operation Type: Hydraulic (HYD) Scarifying Width: 1225mm Minimum Turning Radius: 6900mm Articulate Angle: 25 Fuel Tank Capacity: 230L Optional Equipment: BL(4000), S/C

Daikin Hydraulic Pump PV22 Brand new Made in Japan Quantity 110pcs

The CAT988 with the 3408 engine is a powerful machine designed for heavy-duty applications, including container handling. Here are some key specifications: Engine: CAT 3408 DITA (Direct Injection Turbocharged Aftercooled) The CAT 3408 engine is a V8 engine, meaning it has 8 cylinders arranged in a V configuration. Net Power: 538 hp (SAE J1349:2011) Engine Power: 580 hp (ISO 14396:2002) Gross Power: 588 hp (SAE J1995:2014) Maximum Capacity: 50,000 pounds (as indicated on the boom arm in the image you provided) Fuel Efficiency: Features like Economy Mode help save on fuel while maintaining productivity Durability: Built with advanced filtration systems for extended performance and reliability Productivity: Superior digging, higher bucket fill factors, and reduced dig times

We have 2units of Samsung (SD20) brand bulldozers brought from the Korean military. It's in good condition because it was brought from the military.

We have 4sets of used Detroit generators that were used as emergency power sources (Standby only) at a municipal water drainage plant in Korea. Please review the attached documents and assess ENGINE SPECIFICATION ENGINE MODEL Detroit Diesel 8163-7416 1232HP ENGINE NO. 16VF013546 RPM 1,800 Cylinder 16 Injection method Direct injection Cooling method Water Cooled Fuel consumption rate 246â??/h GENERATOR SPECIFICATION (AC Generator, 3�?, 60Hz, Brushless type Generator Model DIG 4800 Emergency output 990 kVA / 792 kW Continuous output 900kVA / 720kW Voltage and Current 600 v x 86.6 A Revolution 1800RPM Excitation Voltage/Current 65V/10A Power Factor 80% Insulation Class F

We have a stock of quality, low-life generators from the military ï?¬ CAT 3408 400kW ï?¬ CAT C-16 500kW ï?¬ CAT 3406 350kW (House type) ï?¬ Cummins VTA-28G5 500kW ï?¬ Cummins LTA-10 250kW (House Type) ï?¬ Cummins LTA-10 250kW ï?¬ Cummins NT85-G3 350kW ï?¬ Cummins NT85-G3 350kW (House type) ï?¬ Cummins NT85-G2 300kW Please study if it is suitable for your market.

We have Used Scania Bogie set (Tandem) RBP 735 RPB 730 Volvo Tandem Study it in your market.

We are very well handling used Korean car engine with gearbox: Hyundai Porter/Grace/SantaFe engine with gearbox (Euro 4, 5) Kia Bongo/carnival engine with gearbox (Euro 3, 4, 5) we are to meet your needing various engines from Korea

We specialize in exporting used tracks and currently have Scania MAN Dumper & Tractor in stock MAN D20 TRACOR (year2006) Scania Dumper 124C 420 (year 2004) Scania Dumper 380 (year2004) Scania Dumper R470 (year2006) Scania Dumper R480 (year2008) Scania Dumper R480 (year2009) Scania Tractor (year2006) Scania Tractor 124L 420 (year2004) Scania Tractor R420 (year2007)

We specialize in exporting used tracks and currently have IVECO TRACTOR in stock IVECO 430 (year2007) IVECO 450SCR (year2008) IVECO 480 (year2007)

Hyundai D4BB LPG engine (The only difference between Diesel and LPG is the engine head, everything else is the same) here key specifications: ] Displacement: 2607 cc Power Output: 78 â?? 83 hp Torque Output: 162 â?? 168 Nm Cylinder Block: Cast iron Block Head: Aluminum 8-valve Cylinder Bore: 91.1 mm Piston Stroke: 100 mm Compression Ratio: 21.0 Fuel System: Prechambers Fuel Type: Turbocharging: No Engine Oil Capacity: 6.5 liters

Based on the serial number 10KA0976, your equipment is a SkyTrak 10000M ATLAS telehandler, also known as the All-Terrain Lifter Army System (ATLAS) with a 10,000 lb capacity. Here are the key specifications: Lifting Capacity: 10,000 lbs (4,536 kg) Maximum Lift Height: Approximately 27.5 ft (8.38 m) with the 10,000 lb carriage Maximum Reach: Approximately 24 ft (7.4 m) Dimensions: Height: 102 inches (259 cm) Width: 100 inches (254 cm) Turning Radius: 13.5 ft (4.1 m) Frame Tilt: 9 degrees each way Hydraulic Reservoir Capacity: 55.6 gallons (214 liters) Fuel Tank Capacity: 44 gallons (167 liters) Boom: Telescopic 3-stage Steering Modes: 2-wheel, 4-wheel, and crab steering Fording Depth: Up to 36 inches (91 cm) Transportability: Air transportable in C-130, C-141, C-5A, and C-17 aircraft

We have brand new Hino EM100 Engine parts Engine black 5pcs Camshaft 62pcs Tappet 450pcs

The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling Specifications Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010 Overall Length Working 5760 mm 227 in Overall Width Working 2400 mm 94 in Overall Height Working 9000 mm 354 in Hole Range 65 89mm Engine Power 156ps 115kw 2200rpm Machine Weight 12400 kg 273373 lb Motor Power 132 kW 17947 hp

CASE MW36 Wheel Loader - Typical Specifications Operating Weight: Approximately 3,200 to 3,600 kg (about 7,000 to 8,000 lbs) Bucket Capacity: Generally around 0.65 to 0.9 cubic meters Dimensions: Overall Length: Approximately 4.0 m (varies with configuration) Width: Roughly 2.5 m Height: Around 3.0 m Lift Height: Typically in the range of 2.5 to 3.0 m Transmission: Options may include hydrostatic or mechanical drive, depending on the model configuration Additional Features: Ergonomic operator station Versatile hydraulic system for various attachments

The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications: Engine Type: 4.6L V8 Horsepower: 250 hp Steering: Digital Throttle & Shift (DTS) Starter: Electric Shaft Length: Available in 25" (X-Long) and 30" (XX-Long) Power Trim & Tilt: Yes Fuel System: Electronic Fuel Injection (EFI) Alternator: 115-amp Weight: Approximately 600 lbs (272 kg) Cooling System: Water-cooled with thermostat & pressure-controlled The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.

The Volvo Penta TAMD41M-A is a reliable and powerful marine diesel engine. Here are some key specifications and features: Engine Type: 6-cylinder, 4-stroke, direct-injected, turbo-charged marine diesel engine with aftercooler1. Power Output: 147 kW (200 hp)1. Cooling System: Freshwater cooled exhaust manifold and oil cooler1. Alternator: 14 V/50 A1. Other Features: Flexible front engine mounting, wet type exhaust elbow, lubrication oil filter, and turbo-charger

We are one of the concrete pump manufacturers in Korea Brand: SAMIL GIANT in Korea Boom length: 67m 62m 58m 52m 48m 45m 42m 37m 32m 28m 24m 21m Stationary pump, Line pump We are able to send full details if you make an inquiry