This Korean made Closed Expansion Tank acts as a substitute of open expansion tank to prevent the corrosion of pipes. It guarantees smooth operation by completely intercepting the contact of pipe water in cooling, heating and hot water heating pipes with an air and filling proper pressure to receive and restore expansion water. This Korean made Expansion Tank is available in variety of sizes and capacities to fit your application. [ FEATURES ] PREVENT PIPE CORROSION Ass contact with air is intercepted completely, air cannot get mixed with water so the span of pipes is prolonged as corrosion is prevented. WATER SUPPLY UNNECCESSARY No make-up water is needed as no pipe water is lost by evaporation or overflow. COMPLETE AIR DISCHARGE FUNCTION The air venting system of pipe is good its pressure is properly maintained. LIMITELESS INSTALLAION APPLICATION As it can be installed in every place including basements, roof tops and mid-stories, it is not frozen to burst and space can be utilized. EXTENDED OPERATIONAL TEMPERATURE RANGE Pressure needed for pipe system can be easily maintain, so operational temperature over 100â?? from medium or high temperature water system can be easily obtained. GUARANTEED SMOOTH OPERATING PERFORMANCE Effective operation is possible without problems of pipe circulation, pump efficiency, pipe noise and vibration caused by air mixture. SANITARY SYSTEM OPERATION Hot air heating system is sanitary because hot air is not opened to the air. NO MAINTENANCE IS REQUIRED No maintenance is needed and the lifespan of tank and membrane is semi-permanent, no heat loss exists and energy is saved. The lifespan of piping in life cycle cost. [ SPECIFICATIONS ] * Shell : Fabricated steel designed and constructed as per ASME Section VIII, Div. 1 * Bladder : Butyl Rubber * Design Pressure : 125 psiG (862 kPa) Options : 150 psiG (1034 kPa), 175 psiG (1206 kPa), 250 psiG (1723 kPa), 300 psiG (2068 kPa) * Design Temperature : 240 (116 ) * Tank Volume : 40~5000 litters
FINETANK, the fine tank from Korea, the high quality WATER STORAGE TANKS made of SMC PANELS & STEEL REINFORCEMENTS are available in various capacities and different shapes for various applications (residential/commercial buildings, water treatment plant, fire fighting, irrigation, etc.). FINETANK - GRP SECTIONAL WATER TANK complies to KSF 4811, KSM 3305, KSM-3401 (Korean Standard), BS 6920:2000 (British Standard), SS245:1995 (Singapore Standard) FINETANK, the WRAS approved GRP SECTIONAL WATER TANK is being produced by the ISO-9001 certified Korean manufacturer. [ ADVANTAGES ] EXCELLENT HYGIENIC PROPERTISE * Nontoxic, WRAS certified materials * Suppression of algae and microorganisms with excellent blocking of sunlight * Minimization of moss and scale by smooth surface finish OUTSTANDING DURABILITY * Optimal system by FEM (Finite Element Method) design. * Anti-corrosion materials in SS316, HDG and PE coated S.S. ABSOLUTE WATER TIGHTNESS * Foam type gasket with excellent elasticity and resilience. FREE CAPACITY DESIGN * Various shapes to meet different site conditions (Square / Center vacant square / L-shape / Channel-shape, etc) * Versatile capacities (0.5m3 ~ 5,000m3). * Various panel sizes : 1x1, 0.5x0.5, 1x0.5, 0.3x0.3, 1x2, 1.15, etc. EASY INSTALLATION & MAINTENANCE * User-friendly installation even in the restricted area by using standardized panels and reinforcements. PRE-INSULATED PANELS (optional) * PU foam pre-insulated panels to avoid high heat or cold. MUTI-COMPARTMENTS (optional) * A tank can be partitioned into multi-compartments for respective use when tank is under cleaning or maintenance. [ SPECIFICATIONS ] 1 Panel : Hot-press molded SMC panel 2 Insulation : Poly Urethane Foam 3 Inner tie-rod : Stainless steel 316 / 304 / Stainless steel with PE coating - optional (External reinforcement system ->No inner tie-rod system is available up tp 4mH) 4 Roof support : SMC pultrusion pipe 5 External reinforcement : Hot dip galvanized steel 6 Roof support : SMC pultrusion pipe 7 Inner bolts : Stainless steel 316 / 304 8 External bolts : HDG steel / Stainless steel / Rubber capped steel 10 External ladder : HDG steel There're more options you're looking for. For more details, please feel free to contact us !
FINETANK - GRP SECTIONAL WATER TANK - High quality WATER STORAGE TANKS made of GRP PANELS & STEEL REINFORCEMENTS are available in various capacities and different shapes for various applications (residential/commercial buildings, water treatment plant, fire fighting, irrigation, etc.) FINETANK, the fine tank from the ISO-9001 certified Korean manufcaturer complies to international standards WRAS, BS, KS, SS. [ ADVANTAGES ] EXCELLENT HYGIENIC PROPERTISE * Nontoxic, WRAS certified materials * Suppression of algae and microorganisms with excellent blocking of sunlight * Minimization of moss and scale by smooth surface finish OUTSTANDING DURABILITY * Optimal system by FEM (Finite Element Method) design. * Anti-corrosion materials in SS316, HDG and PE coated S.S. ABSOLUTE WATER TIGHTNESS * Foam type gasket with excellent elasticity and resilience. FREE CAPACITY DESIGN * Various shapes to meet different site conditions (Square / Center vacant square / L-shape / Channel-shape, etc) * Versatile capacities (0.5m3 ~ 5,000m3). * Various panel sizes : 1x1, 0.5x0.5, 1x0.5, 0.3x0.3, 1x2, 1.15, etc. EASY INSTALLATION & MAINTENANCE * User-friendly installation even in the restricted area by using standardized panels and reinforcements. PRE-INSULATED PANELS (optional) * PU foam pre-insulated panels to avoid high heat or cold. MULTI-COMPARTMENTS (optional) * A tank can be partitioned into multi-compartments for respective use when tank is under cleaning or maintenance. [ SPECIFICATIONS ] 1 Panel : Hot-press molded SMC panel 2 Insulation : Poly Urethane Foam 3 Inner tie-rod : Stainless steel 316 / 304 / Stainless steel with PE coating - optional (External reinforcement system ->No inner tie-rod system is available up tp 4mH) 4 Roof support : SMC pultrusion pipe 5 External reinforcement : Hot dip galvanized steel 6 Roof support : SMC pultrusion pipe 7 Inner bolts : Stainless steel 316 / 304 8 External bolts : HDG steel / Stainless steel / Rubber capped steel 10 External ladder : HDG steel * INternational Certificats : WRAS, PSB, ISO-9001 There're more options you're looking for. For more details, please feel free to contact us !
Manual lock/unlock lever Internal force lock Specially designed number pad Status/error notification Volume setting
prefabricated, modular, panelizing system. geocabins structural insulated panel is composed of a polyurethane insulation core with interior and exterior skins of oriented strand board. Panels are precisely modular manufactured in factory through a foam injection process in which the polyurethane bonds directly to the skins. They include door, window and electrical conduit boxes to ensure the quality of construction while drastically reducing the time involved. They are a one-piece product that is designed to enclose wood frame structures, log structures and other types of conventional home. this panel system is completely structural and can substitute for conventional framing in most applications. Features Highly energy efficient Save 40% or more on heating and cooling costs A green / sustainable / environmentally friendly product Highly resistant to high wind and hurricane forces Highly resistant to seismic forces Easy to maintain Affordable and cost effective Includes provisions for plumbing in walls adjacent to kitchen and bath areas Structure is contained within the panels No heavy equipment required at site Benefits Ready to assemble upon delivery, quickly and easily Comprised of light weight panels Incorporate large size panels to speed erection and minimize connections Require less skilled labor and fewer trade contractors for assembly Does not require heavy equipment on site for handling of installation Proprietary connection system Does not require any special tools or equipment for assembly Does not produce any site waste
geodome is the most advanced building systems in the world, economic and efficiency, secure, sustainable housing made of Fiberglass ReinforcedPlastics. geodome can be assembled, erected, finished interior in a day. geodome is ever lasting building (up to 50 years ) geodome technology combines in three major advantages: 1) strength of the dome shape, 2) constructed of molded GRP Panel, 3) eco-friendly inside insulation (at the field). Resistance of nature disaster (hurricane, earthquake, flood, snowstorm, tornado) High impact resistance High structural load capacity Lower heating and cooling cost Quick construction Portability and re-fabricate Fire retardant. No maintenance Resistance of sunlight (UV protect). Water and moisture resistance No deterioration, mildew, rot, rust, corrosion No termites, insects The versatility of the geodome allows it to be put to a variety of uses: Residential (glamping camp, bungalow, cottage, lodge) Specialized uses (military base, labor accommodation, disaster shelter, army camp) Education facility (class room, recreation room) Regional facility (mosque, church) Environmental facility (desert, beach, marina, rough terrain, mountain) Highly energy efficient A green / sustainable / environmentally friendly product Free span truss design permitting open and flexible floor plans Water and moisture resistant Rot and decay resistant Mold, mildew, and insect resistant Highly resistant to high wind and hurricane forces Highly resistant to seismic forces Easy to maintain Affordable and cost effective Backed by a 30 year Limited Warranty No painting, sealing or roofing required Structure is contained within the panels No heavy equipment required at site Ready to assemble upon delivery, quickly and easily Comprised of light weight panels Incorporate large size panels to speed erection and minimize connections Require less skilled labor and fewer trade contractors for assembly Does not require heavy equipment on site for handling of installation Proprietary connection system Does not require any special tools or equipment for assembly Does not require a vapor barrier / retarder Does not require a weather resistant barrier (i.e. house wrap) Does not require any additional on â?? site exterior finish materials (siding, roofing ) Shell complete upon installation of last panel May be dis-assembled and re-assembled with no degradation in performance Does not produce any site waste UV resistant facing surfaces
-Structure : Tube is connect by Socket -Feature : It's possible to choice the material of Socket by materiality (SS400, STS304) -Materiality available : Cold and Hot water, oil, gas, Air, steam and so on -Working temperature[max] : 220 deg celcius
USE - Ventilation(Building,Mines,Welding gas at ship-Building yard,Toxic gas) - Dust collection(Civil engineering,Metal grinding and machine manufacturing plant,Textile spinning and weaving factory) - Transporting powders and liquid - Heating house and air-conditioning system - Cleaner hose for Automobile and various industrial machines FEATURES - Excellent flexibility and light weight - Good resisatance against chemicals - Smooth interior surface with good flow rating - Easy to handle and install
USE -To cultivate trees at home and flower garden -In a vinyl plastic hothouse and a fish market -To supply water and liquid matter FEATURES -Light-weight and flexibility -Easy to install -Excel in force of restitution
USE -Supply and discharge purpose for the installation of plant machinerise -Pipe laying for industrial machineries -For transporting liquid and powders -Pipe laying for food stuff machinerise(nonpoisonous) FEATURES -Adhered with the same quality of outer and inside skins -Produced by braiding process and perfect in inside and outside pressure -As clear, easy to recognize the materials inside hose
Features Manual Lock/Unlock lever Manual Lock mode Automatic Lock Re-lock features Self Check-up function Fire Alarm and Emergency System Anti-Prank Alarm Force Break-in Alarm Pick-Proof Anti-Hacking Alarm External Emergency Battery Terminal Low Battery and Replace Battery alarm Internal Force Lock Digitalized Number Pad Status/Error notification Volume Setting Etiquette Mode Pin Authentication 3 user-select able display modes
FEATURES Manual Lock/Unlock lever Imaginary Number Features Manual Lock mode Automatic Lock Re-lock features Self Check-up function Fire Alarm and Emergency System Anti-Prank Alarm Force Break-in Alarm Pick-Proof Anti-Hacking Alarm External Emergency Battery Terminal Low Battery and Replace Battery alarm Internal Force Lock Advanced touch-type number pad Activity LED Status notification Volume Setting Etiquette Mode Pin/RF CARD Authentication Adjustable Left Hand and Right Hand Setting Easy Key and Pin Registration/Delete Backlighted number pad
FEATURES Manual Lock/Unlock lever Imaginary Number Features Manual Lock mode Automatic Lock Re-lock features Self Check-up function Fire Alarm and Emergency System Anti-Prank Alarm Force Break-in Alarm Pick-Proof Anti-Hacking Alarm External Emergency Battery Terminal Low Battery and Replace Battery alarm Internal Force Lock Digital Number Pad Activity LED Status notification Volume Setting Etiquette Mode Pin/Touch Key Authentication One Touch Functionality Easy Key and Pin Registration/Delete Backlighted number pad
Advanced digital lock from st-mt2003 normal lock. Added led lighting function for customer's easy use at night
No! keyhole. No! handle No! lock device. Only smartphone can control this safe & working by motor lock inside. Battery replace power off condition at least 10 days. Set up upto 10 persons for management safe. Higher level of security functions will provide top security level to users.
1. Digital lock for safe, vault, cabinet & door 2. Pad: abs/ 32mm(h)x100mm(diameter) 3. Lock: diecasting/ 29(h)x62(w)x95mm(d) 4. Weight:600 gr
Ready mixed wall tile adhesive for common format tile less than 250 x 400mm, 2.2kg Ready to use - no mixing required Non-flammable Good water resistance and persistence Quick and easy installation Excellent grab on vertical surfaces 12, 14, 17, 20kg in a plastic container
Design Pressure : 2.3MPa Volume capacity : 4.9~50 Ton Diameter : 1500~2400mm Height : 2150~3175mm Material : A516-70 Standard/Certificate : KS Q ISO 9001:2009/ ISO 9001:2008 Registered a patent of Cryogenic storage tanks Hold the right to the patent. ASME ¡°U¡±&¡±S¡±STAMP
Design Pressure : 2.3MPa Volume capacity : 4.9~50 Ton Diameter : 1500~2250 mm Height : 4490~14761mm Material : A51670[internal] / SS400[outer] - Standard/Certificate : ASME U¡±&¡±S¡±STAMP, KS Q ISO 9001:2009/ ISO 9001:2008, Registered a patent of Cryogenic storage Tanks. Hold the right to the patent. Registered a patent of practical new designs for vacuum valve devices of vacuum tanks.
Design Pressure : 1~3.2MPa Volume capacity : 4.8~50§© Diameter : 1250~2400mm Height : 5428~12808mm Material : A240-304, SUS304 [internal] / SS400 [outer] - Standard/Certificate : ASME ¡°U¡±&¡±S¡±STAMP, KS Q ISO 9001:2009/ ISO 9001:2008, Registered a patent of Cryogenic storage tanks, Hold the right to the patent, Registered a patent of practical new designs for vacuum valve devices of vacuum tanks.
