South African Metal Alloys Suppliers and Manufacturers

SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

Product introduction: Calcium is a silvery white metal that is harder and heavier than lithium, sodium, and potassium; It melts at 815 C. The chemical nature of metallic calcium is very active. In the air, calcium is quickly oxidized and masked with an oxide film. When heated, calcium will burn and emit a beautiful glow of brick red. Calcium and cold water have a slower effect, and intense chemical reactions occur in hot water to release hydrogen (lithium, sodium, and potassium can cause intense chemical reactions even in cold water). Calcium is also easily combined with halogens, sulfur, nitrogen, and the like. 1,product name:calcium metal 2,Shape :powder, lump and granulates 3,CAS:7440-70-2 4,Density:1.54g/cm 5,Melting point:850C 6,Boiling point:1440 C(lit.) 7,Application:Wheel keel Product use: At present, in the steel industry, the main use of metal calcium is to process into metal calcium particles, and then to make calcium iron wire or pure calcium wire, and finally used for steel refining outside the furnace, its role is to desulfurization, deoxidation, increase the fluidity of molten steel. Promote the rapid rise of inclusions in molten steel, generally used in the production of high-quality steel; as a dehydrating agent to produce anhydrous alcohol; in the petroleum industry, as a desulfurizing agent, in the metallurgical industry, it is used to deoxidize or desulfurize . However, calcium compounds have a very wide range of uses, especially in the construction industry.

Zinc ingot (purified metallic zinc) Zinc ingot refers to pure zinc, of course there will be impurities, but as zinc ingot, at least more than 90% purity. Mainly used in die casting alloy, battery industry, printing and dyeing industry, medicine, rubber industry, chemical industry, zinc and other metal alloys in electroplating, spraying and other industries have been widely used.

Virgin Mercury purity = 99.99% Pure by wt min. - Free from heavy metals - Packing iron cylinder ( 34.5)kg net weight - Physical State: Liquid - Appearance: silver - Odor: odorless - PH: Not available. - Vapor Pressure: 0.002 mm Hg AT 25C - Vapor Density: 7.0 - Evaporation Rate: Not available. - Viscosity: 15.5 mP AT 25 dig C - Boiling Point: 356.72 dig C - Freezing/Melting Point:-38.87 dig C - Decomposition Temperature: Not available. - Solubility: Insoluble. - Specific Gravity/Density: 13.59 (water=1) - Molecular Formula :Hg - Molecular Weight: 200.59 Mercury Packaging: * 34.5kg virgin steel flask

Product quality Tin is a silvery white and soft metal. It is soft and has good ductility. Its hardness is relatively low. You can cut it with a knife. At the temperature of 100 â??, it can develop into very thin tin foil, and the thickness can be less than 0.04 mm. Pure tin can be used as coating materials, and has a very wide range of applications in food, machinery, electrical appliances, automobiles, aerospace and other industrial sectors. Each ingot weighs 25kg+ 1kg; Bundled, each bundle weighs about 1050 kg The impurity composition of our tin ingots:

Copper Wire Scrap grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5.. % (Max.) Total impurities...0.3.. % (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle Pure copper scrap 99.99% 1.Copper wire scrap 2.Copper wire,tube,plate,etc 3.High quality:99% Copper Scrap 99% High-quality cable scrap with almost no impurities Single Crystal Copper Wire 1.pure copper scrap 2.Good fatigue/abrasion/corrosion resistance 3.Be the bearing,switch,frame Millberry Cu 99.9%min Wire diameter: 0.30mm, 0.25mm, 0.20mm competitive price. Copper Scrap 99.9% Specification: ITEM TEST RESULT Copper: 99.9% Carbon : 0.03% Phosphorus : 0.01%max Coblet: 0.01%max Sulphur: 0.01%max Iron: 0.005%max Zinc: 0.003%

The Compressor Scrap offered by us has good recycle value and are widely in demand. We are offering Compressor Scrap at very reasonable price for the convenience of the customers. Description Fridge/AC Compressor Scraps We sell Fridge/AC Compressor Scraps at a very competitive market price. Please let us know if you have a target price. Please kindly find some specification below. 1) Quantity: between 1,500 MT up to 3,600 MT per month. 2) Packing: As buyer requires (20ft container is up to 3000 pcs to 3450 pcs of compressors in the container. 25 MT or 26 MT) 3) Delivery: Immediately and prompt. Delivery Time: 7-21 days depending on delivery port.. Specifications Drained Copper Compressor â?? Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Monthly Supply Capacity: 500 - 1500 metric tons, Type: Fridges, AC. Packaging Detail: Wood Pallets, 20(40) FCL/ According to ISRI Specification in Containers Quantity: Between 200~500MT per month Minimum Order acceptable 1x20FCL (25MT or 26MT/20FCL, 3000 or 3450 Pieces/20FCL

Copper Wire Scrap, (Millberry Copper) 99% High Purity Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Pure copper scrap 99.99% 1.Copper wire scrap 2.Copper wire,tube,plate,etc 3.High quality:99% Copper Scrap 99% High-quality cable scrap with almost no impurities Single Crystal Copper Wire Application:copper scrap wire can be used on low speed wire cutting machines like Agie charmilles, Sodick,

Product: Brass Scrap Honey Specification - Temper : 'O' 1/2 H - Tensile Strength : 340 Min-400 Min - Elongation % on 50 mm G.L : 40 Min - Vickers Hardness VPN : 80 Max/95 Min-120 Min -Cu -: 58% - 60% -Pb -: 1.5% - 2.5% -Imp -: 0.3% (Max.) -Zn -: Remaining Consist of: doors and windows Profile frame Our Brass Honey Scrap consist of Faucet scrap, scrap of machinery parts, plated brass, etc Specification - Temper : 'O' 1/2 H - Tensile Strength : 340 Min-400 Min - Elongation % on 50 mm G.L : 40 Min - Vickers Hardness VPN : 80 Max/95 Min-120 Min -Cu -: 58% - 60% -Pb -: 1.5% - 2.5% -Imp -: 0.3% (Max.) -Zn -: Remaining Consist of: doors and windows Profile frame, house utensils Our Brass Honey Scrap consist of Faucet scrap, scrap of machinery parts, plated brass, etc Item Standard Result Cu% 99.9 min 99.99 Sb% 0.002max 0.001 As % 0.002max 0.0006 Fe% 0.005 max 0.0012 Ni% 0.002 max 0.0008 Pb % 0.005max 0.0025 Sn% 0.002max 0.0007 S% 0.005max 0.003 O% 0.002max 0.001 Zn% 0.005max 0.002 P% 0.001max 0.0002 50kgs/bale,about 20mt/20'fcl

1. Aluminium wire scrap 2. Reasonable price and high purity 3. Timely delivery and promptly shipping 4. Fire deals Aluminium scrap 6063 Aluminium profile scrap 6063 Aluminum content 75%, 95%, 99.7% Aluminium content 75%, 95% 99.7% or can satisfy the demands of the customer (1). MOQ: We respond to quantity and price inquiries; (2). Aluminium can press; (3). We also carry other merchandise. (4). The high recovery rate scrap aluminium wire with a promotional price Contact Us To Place An Order