Johannesburg Plastic Moulded Furniture Suppliers and Manufacturers

We are renounced exporter of all kind of scrap materials ranging from Compressor scraps Fridge, A / C etc , Copper Scrap , Drained Lead battery scrap , Lead Ingots , Lead Plates / used batteries , Lead Scrap , Stainless Steel Scrap , ,Plastic and Rubber , Plastic Products , Paper Scrap any kind , Plastic Scrap LDPE, HDPE, Pet Flakes etc, Specifications: 100% Bale (Clear natural color,Clean and stored inside, No Dirt or any contamination) Packing :in Bale / Rolls 23 tons in 40ft HQ . Quantity available for shipment: 5000 Tons monthly only. We are looking for the opportunity to serve you!

We have Long-term relationships with our customers and Suppliers from all over the world from whom we have learned and they have learned from us to ensure Long Term success. We ensures quality, diversity and customer satisfaction by offering technical advice. Main Specification: Preferred Density Range : 18 to 25kg/ m3 Clean & Dry Unused Off-Cuts : 100% Color: Mixed Foam Skins : None Re-bonded Foam : None Bare Skins : None Ester-type Foam : None Hydrophilic Foam : None Laminated Fabric/Foam : None Laminated Vinyl/PVC/Foam : None Reticulated Foam None Visco-elastic Foam : None Foreign Matter/Contamination : Absolutely None Factory Sweepings : Absolutely None Recycled, Old or Used Foam : Absolutely None Packaging : In compressed by bales Weight: 250 to 300kgs per bale Loading Quantity: 40' High Cube containers can loaded no less than 18,000kgs

We sale best quality recycled plastic scraps like LDPE Scrap,PP Scrap,EVA scrap,HDPE Scrap,PS Scrap,ABS scrap and others and we are looking for serious buyers that are in need of any type of plastic scraps contact with us for more details. We are direct supplier of HDPE Milk Bottle Scrap/ Crushed HDPE Milk Bottle Scrap/ PET Bottles Scrap at very cheap price. We sell worldwide to any serious buyer at competitive price. Origin post-commercial. Quality : HDPE. Clear natural color. Clean and stored inside. Dry material. Packed in bale. We also have the following products. - HDPE Clear/Natural Regrind (clean and washed). - HDPE Clear/Natural Scrap Baled. - HDPE White Regrind/Baled (clean and washed). - HDPE Milk Bottle Regrind. - LDPE Film Baled 100, 98/2 and 95/2. - LDPE Clear/Natural Regrind. - LDPE White Regrind. HDPE bottle scrap flakes description. ITEM STANDARD. Melt Flow Rate(g/10min) 0.1. Density(g/cm3) 0.95. Power Ash% 0.01. Tensile Strength(MPa) 22. Elongation At Break% 600. Environmental stress-cracking 1500. Advantage of HDPE bottle scrap flakes. 1.Hot water washed and no label, no any contaminant. 2.dry and clear flakes. 3.white,blue, red, yellow and so on. 4.from crates,drums,pallets. HDPE bottle scrap flakes Applications. Used for Milk bottle,mattress, toy fillings and so on. Packing and shipping. Packing:25kg/pp bag ,1MT/bag or as the customers' requirements.

We are exporters of large quantity of HDPE Milk Bottles Scrap with good quality that meet every standard HDPE Milk Bottle Scrap Quality : HDPE Clear natural color Clean and stored inside . Dry material. Packed in bale. Form film Color clear Packing in bale Origin post-commercial Quantity per load 27-28MT in 40ft container We also have the following products: - HDPE Clear/Natural Regrind (clean and washed) - HDPE Clear/Natural Scrap Baled - HDPE White Regrind/Baled (clean and washed) - HDPE Milk Bottle Regrind - LDPE Film Baled 100, 99/1 and 98/2 - LDPE Clear/Natural Regrind - LDPE White Regrind HDPE milk bottle scrap Hdpe flake HDPE Drum in baled HDPE Regrind LDPE Clear film scrap Pet bottle scrap Pet flakes hot washed Green pet strip scrap PC water bottle scrap PC Water bottle regrind PC CD / DVD METALIZED AND CLEAR SCRAP Bopp film roll scrap pp jumbo back scrap PP super sack scrap PP big rope scrap PP bucket scrap PMMA Acrylic sheet scrap LLDPE film scrap EVA film roll scrap EPS Block scrap Contact Us Directly With Your Email For More Details

Product Description Recycled Blue HDPE drum scraps HDPE scraps Color: Red, blue, green, yellow, white Grade: Recycled granules Sample: Free Plastic scrap hdpe regrind 1. HDPE, LDPE, LLDPE, PP manufacture 2. Factory price 3. Free sample 5. Virgin and recycled Sepcification: 1. Hot water washed, dry and clean flakes 2. MFI 0.03 from drums 3. MFI 9-12 from crates 4. Blue, red, yellow, black, white color 5. No label Application: To make drums, crates, pallets and so on. ITEM STANDARD Melt Flow Rate(g/10min) 0.1 Density(g/cm 3 ) 0.95 Power Ash% 0.01 Tensile Strength(MPa) 22 Elongation At Break% 600 Environmental stress-cracking 1500 ITEM STANDARD Melt Flow Rate(g/10min) (1:21.6kg) 9.0-13.0 Density(g/cm3) 0.948-0.951 Power Ash% 0.04 Tensile Strength(MPa) 23 Elongation At Break% 600 Environmental stress-cracking 1500

We are one of the highest manufacturers and suppliers of PET Flakes with much shipping experience worldwide .Our markets include ASIA, EUROPE,AMERICA, UAE, MIDDLE EAST, HONGKONG AND OTHER COUNTRIES. We supply Hot Washed Clear / Transparent PET Flake supplying of excellent quality range of pet flakes that include hot washed pet bottle flake, pet sheet flakes, washed pet bottle flake and unwashed pet bottle flake. widely used for making plastic bottles, these pet flakes are free from impurities and widely appreciated for their attributes like crystal clear transparency and low-melting point. our clients can avail bulk quantities of these pet flakes at very affordable rates from us.our prices are highly competitive and quality of the product is the best. we always supply worldwide with fast and accurate delivery. product name: pet bottle scrap flakes white viscosity: 0.70 0.80 dl/g melting index: 35 ± 5 g/10 min melting temperature: 248 252 humidity (%): < 1% ph: 7 8 density: 0,25 0,4 g/cm3 polyolefin: 50 ppm paper and fiber: 20 ppm metal: 20 ppm pet with glue: 30 ppm other admixtures: 30 ppm size: 10-12 mm. flake size 8mm: 1 % flake size 2-4mm: 20 % flake size 2mm: 1 % process : hot washed. moisture : 0.5 % max. pvc content : 0.01-0.03 %. i.v. : 0.7 - 0.85. m.p. : 255 +/- 5 c. color availability : clear /crystal foreign materials : 0.5 % max. bulk density: ~450kg/m3 hs code: 3907 6000 Quantity : 27 ton / 40 FT FCL Kindly send us inquiry with your full contact details email address and phone number/whatsapp for faster and timely response .

Low density polyethylene (LDPE), also known as high pressure polyethylene, is a kind of plastic material, it is suitable for thermoplastic molding processing of various forming processes, forming processing is good. LDPE is mainly used for thin film products, but also for injection products, medical devices, medicine and food packaging materials, blow molding hollow molding products and so on. Item Value Product Name LDPE Granules Other Names Low Density Polyethylene Place of Origin China Grade Standard Industrial Grade,Injection molding grade Density 0.91-0.93 g/cm³ Appearance White Granules,customized color Application Plastic,film , bag Sample provide Package 25 kg/bag,1000 kg/bag,customized packag

HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %

We produced different qualities in terms of Pet flake size and colors however the product standards are ensured as per international parameters of end use of the Pet Bottle Flakes. Currently we are enganged in recyling Pet bottles to make Pet flakes. We have collection center in different locations of Bangladesh for collecting PET bottles. After collection, all the bottles are sorted and the lables are removed in our own factory. It is then crushed and washed properly by a team of highly skilled trained professionals to obtain the best quality .It is then tested in our own advanced laboratory for further inspection of quality of the product.After the quality is confirmed it is then packed in plastic bags of 25kg/ 50kg. Product List: - Pet Flakes Clear - Pet Flakes Green - Pet Flakes Brown 1. Product: PET Flakes 2. Grade: recycled Bottle Flake, Hot Washed 3. Color: 100% Clear, white 4. Form: Flake 12-14mm

PE Granules High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 �° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good. Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its LOW DENSITY and the softest material. Linear Low Density Polyethylene (LLDPE) is a copolymer of ethylene and a small amount of advanced olefin in the presence of catalyst.LLDPE is similar to LDPE in appearance, with poor transparency and good surface gloss. LLDPE has the advantages of low temperature toughness, high modulus, bending resistance and stress cracking resistance, and good impact strength at low temperature. We have a wide range of grade PE materials with different physical properties. If the table does not meet your requirements, please feel free to consult us we will try our best to meet all your requirements for plastic granules.

Basic Details Color: Transparent, green , blue, yellow , red ,white etc. Size:1.22*2.44m 1.5*3m 1*2m etc. Thickness: 1-200mm or as your request Packing: based on your requirement MOQ:1-2 ton Payment:T/T Key Features of Acrylic /PMMA 1.Good light transmission. 2.Good weather resistance. 3.Can be molded and reprocessed. 4.Widely usage, easy to dyeing and painting. 5.Non-toxicity. 6.High mechanical strength. 7.Light weight. 8.Good impact strength. 9.Good Insulation feature, widely used for different electrical equipment. 10.Good hard coating and scratch resistance 11.Good chemical resistance, superior to most other plastic materials. 12.Easy to clean and maintain.

AS PS ABS PLA HDPE Granules Acrylonitrile - styrene copolymer. Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as engineering plastics.Excellent heat resistance and solvent resistance. Application. 1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases. 2. Special grade: blade of fan, batteries housing, lighters. 3. Refrigerator Sleeves, Miscellaneous 4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling 5. High Transparency, Heat Resistance, chemical resistance PC + Glass Fiber reinforced (GF) The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm. Grade: (ML3410-30 / MH3515-30 / MN-3110-30) 1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF) General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact. Application: Watch parts, switches and nobs, OA equipment. 2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF) Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage and dimensional stabilities. Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames. 3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF) MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance, surface aesthetics and weld line strengths. Applications: Meter cases, electrical and electronic housings.

LDPE Granules Low-density polyethylene (LDPE) is a synthetic resin using a high-pressure process via free radical polymerization of ethylene and is therefore also called high-pressure polyethyleneâ. It features light, flexible, good freezing resistance and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt, and excellent electrical insulation properties. Its vapor penetration rate is low.

Virgin HDPE 7000F Polyethylene HDPE 7000F is high density polyethylene film grade which well known for the high quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness and good heat sealability. It is suitable for producing general purpose packaging films in a wide range of size and thickness. Products indicators HDPE cable material Property Unit Typical Value Mass density g/cm 0.941-0.959 Melt flow Rate(190 Centigrade /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature Centigrade MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15

Specification: Make barrel, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating. Application: HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams. Application Suitable for film, heavy packaging film, cable insulation materials, blow molding and foam products.