Nickel Copper Sludge
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Zinc ingot (purified metallic zinc) Zinc ingot refers to pure zinc, of course there will be impurities, but as zinc ingot, at least more than 90% purity. Mainly used in die casting alloy, battery industry, printing and dyeing industry, medicine, rubber industry, chemical industry, zinc and other metal alloys in electroplating, spraying and other industries have been widely used.
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Copper Wire Scrap grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5.. % (Max.) Total impurities...0.3.. % (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle Pure copper scrap 99.99% 1.Copper wire scrap 2.Copper wire,tube,plate,etc 3.High quality:99% Copper Scrap 99% High-quality cable scrap with almost no impurities Single Crystal Copper Wire 1.pure copper scrap 2.Good fatigue/abrasion/corrosion resistance 3.Be the bearing,switch,frame Millberry Cu 99.9%min Wire diameter: 0.30mm, 0.25mm, 0.20mm competitive price. Copper Scrap 99.9% Specification: ITEM TEST RESULT Copper: 99.9% Carbon : 0.03% Phosphorus : 0.01%max Coblet: 0.01%max Sulphur: 0.01%max Iron: 0.005%max Zinc: 0.003%
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
Product Description And Specification; 1. Dry charged battery & MF battery. 2. Meet all DIN & JIS standard. 3. Powerful quick scrap used car batter. Product Feature; (1)Maintenance-free operation. There is no need to check specific gravity of the electrolyte or add Water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leak proof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. Fe Content (%): 100%) Battery features; - Sealed and maintenance free operation battery - Non- Spill able construction design. - ABS Containers and Covers (UL94HB), UL94V-0 optional. - Safety valve installation for explosion proof. - High quality and high reliability. - Exceptional deep discharge recovery performance. - Low self-discharge characteristic. - Flexibility design for multiple install positions. - No memory effect. - CE certificate. - Wide operating temperature range. Battery Application; -Solar system - Alarm System - Cable Television - Communication Equipment - Control Equipment - Security System - Medical Equipment â?? UPS - Power Tools - Toys - Emergency Power System - LED Lig
Aluminum Ingot is a piece of relatively pure material, usually metal, that is cast into a shape suitable for further processing. Ingots usually require a second procedure of shaping, such as cold/hot working, cutting, or milling to produce a useful final product. We supply high purity Aluminum Ingots originated from different part of the world. Product Features: Aluminium Ingot - cast alloy, claimed in the creation of shaped castings, and for other purposes. The popularity of this brand is caused by the low cost of the alloy, the possibility of multiple processing, the relative plasticity, strength. Aluminum ingot made of copper, aluminum and silicon. Apply sculpture, engineering, serves to create a cast aluminum cookware. Characterized by high aluminum ingot castability - low-melting, good fluidity, low linear shrinkage. Commodity aluminum ingot Grade Al99.90 / Al99.85 / Al99.70 / Al99.60 / Al99.50 / Al99.00 / Al99.7E / Al99.6E Appearance silvery white Al (Min) 99%-99.9% weight 20/25kg density 2.7103g/cm3 application Indoor decorations / building material / Furniture / cabinet / Elevator / Car interior decoration / Household appliances / Aerospace and military aspect / aircraft manufacturing / features light weight / good toughness / good anodizing property / Excellent casting performance / Easy to stretch / Non-magnetic and not easy to ignite / Strong ability to reflect visible light / good conductivity of heat and electricity
Nickel/copper sludge, ferrochrome, silicon manganese, chrome concentrates.
Copper, cobalt, tin ores, oxides and alloys.
Heavy steel scrap, metal scrap.
1. base metals copper powder, nickel powder, selenium, silver chloride, and spent catalyst (cucr/ni). 2. ayurvedic massage oil.
Lithium spodumene ore, copper concentrates, fluorspar, nickel concentrates, zirconium, titanium, and chrome concentrates..
Copper wire, scraps, HMS 1&2, aluminum scraps, stainless steel scraps, ingots, copy papers, used rails.
Copper wire scraps, aluminum scraps, HMS 1&2, used rails, compressor scraps, stainless steel scraps, aluminum wheel scraps, scrap taint tabor, cast iron scraps, scrap tires, A4 copy papers, craft paper, newsprint papers, refined sunflower oil, refined soybean oil, refined rapeseed oil, bird feathers, frozen meat, frozen chicken feet, fresh ginger, fresh garlic, fresh onion, fresh pepper, fresh tomatoes, frozen fish, cassava, bananas.
Ferrochrome Ferrochrome is an alloy of chromium and iron containing between 50% and 70% chromium. Ferrochrome is produced by electric arc melting of chromite and chromium ore. Most of the world?s Ferro-Chrome is produced in South Africa which has large domestic chromite resources. The production of steel is the largest consumer of Ferrochrome, especially the production of stainless steel with a chromium content of between 10 and 20%.
Silicon Manganese Silicon Manganese is mostly used in steelmaking and foundry activities. Some 30 % of the manganese used today in steelmaking is still used for its properties as a deoxidant and a sulphide former. In this last case it combines with sulphur avoiding the formation of iron sulphides, which sulphides are low melting point phases which become liquid at hot rolling temperatures and which, consequently, generate surface cracking. The other 70% of the manganese is used purely as an alloying element. Steels usually contains anything from 0,2% to 2% manganese depending on grades as manganese is the cheapest alloying element among those which enhance some key mechanical properties such as strength and toughness.
Ferro Silicon Ferro Silicon has a melting point of 1200°C to 1250°C with a boiling point of 2355°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores. Ferro Silicon is an atomised alloy, which is formed by combining iron and silicon with a silicon content range of 15% to 90%. Ferro Silicon is a universal “heat-blocker” used in the production of carbon and stainless steels.
Ferro-Manganese Ferro-Manganese is an alloy with high percentage of Manganese, which is made by heating a mixture of the oxides MnO2 and Fe2O3 and coal & coke with high carbon content in a blast furnace or an electric arc furnace-type system. The oxides go through carbothermal reduction in the furnaces that result in producing the Ferro-Manganese. Ferro-Manganese is used in the production of steel which acts as an excellent deoxidizer and desulfurizer. We supply the one variant of Ferro Manganese: High Carbon Ferro-Manganese.
Zirconium is a very strong, malleable, ductile, lustrous silver-gray metal. Its chemical and physical properties are similar to those of titanium. Zirconium is extremely resistant to heat and corrosion. Zirconium is lighter than steel and its hardness is similar to copper.
