Feature: Suitable for clear fluid lines such as Water, Liquid, Gas, Steam, etc. This valve is used in systems that require precise flow control and where leakage and air-tightness are critical. Application: It is essential for the flow line of each industry. Mainly used in plant automation facilities due to excellent precision control such as flow rate, pressure, temperature, etc. Characteristics: 1. For excellent wear and tear resistance, Stellite welding is used by default on core components such as plug and seat ring. 2. It is possible to achieve excellent durability of the unfavorable fluid condition and high temperature through heat-treatment on parts of the stem and trim 3. The selection of accurate trim and material through extensive testing and rich experience in technical solution 4. In case of a product related problem, we have technical personnel who can immediately assess the situation and resolve the issue
TYPE & MODEL : MOV GLOBE CONTROL / LVE-21 Series
LV-17 Y-Strainer + Basic Design: Manufacture Standard + Body Wall Thickness: ASME B16.34 + Pressure Rating: ASME B16.34 + Face To Face: Manufacture Standard + Body Bore Size: ASME B16.34 + Marking System: MSS-SP-25 + End Connection: - ASME B16.5(Raised Face) / - ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Flange Size: +ASME B16.5 for 24" & below size +ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) +API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 + Finishes For Contact Faces of Flanges: +ASME B16.5 or MSS-SP-6 + Option: - Drain Plug(ASME B16.34 / MSS-SP-45) - Threads(ASME B1.20.1)
Feature: Segment Ball Control Valve is suitable for conveying and transferring fluid with powder. Application: - Pulp and Papermill - Slurry line in Power plant and Steel mill - Particle facility lines in Powder transfer and Air transport facility - Oil refining high viscosity fluid transfer line - Waste water and Sewage treatment facility Characteristics: 1- It can be used in water treatment devices containing substances (sludge, etc.) that are difficult to be used with conventional ball valves 2-As there is no cavity in the inner space of the body, there is no fluid stagnation and hence the inside is hygienic 3-It is possible to make an Eccentric construction that allows for a fluid cutting effect and excellent air-tightness 4-The Quarter-turn type and V-port flow control create equally proportional flow curves 5- It is more compact than the globe control valve and has a lower torque than the ball valve as the stem structure of upper and lower design for easier operation with smaller actuator 6- It is more economical in terms of price because it has excellent performance against the fluid that is not applied to the globe control valve and has a high CV value that allows a lot of flow control
LV-13 Ball Valve + Basic Design: BS 5351 / API 608 / API 6D + Body Wall Thickness: ASME B16.34 / ISO 17292 / BS 5351 + Pressure Temperature Rating : ASME B16.34 +Face To Face: ASME B16.10 / API 6D + End Connection : - ASME B16.5(Raised Face) / ASME B16.11(Socket Weld) / - ASME B1.20.1(NPT) ASME B16.25(Butt Weld) / - ASME B16.34(Ring Joint) + Body Bore Size: ASME B16.34 / API 6D + Flange Size: - ASME B16.5 for 24" & below size - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing: - API 598 or ISO 14313(API 6D) / BS EN12266 / API 607, 6FA(Fire Test) + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Surface Quality Visual Method: MSS-SP-55 + Sour Service: NACE MR-01-75 or MR-01-03 + Marking System: MSS-SP-25 + Option: Locking Device - Live Loading(Belleville Spring)
LV-14 Ball Valve + Basic Design: BS 5351 / API 608 / API 6D + Body Wall Thickness: ASME B16.34 / ISO 17292 / BS 5351 + Pressure Temperature Rating: ASME B16 34 + Face To Face: ASME B16.10 / API 6D + End Connection: - ASME B16.5(Raised Face) / ASME B16.11(Socket Weld) / - ASME B1.20.1(NPT) / ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Body Bore Size: ASME B16.34 / API 6D + Flange Size: - ASME B16.5 for 24" & below size - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 or ISO 14313(API 6D) / - BS EN12266 / API 607, 6FA(Fire Test) + Finishes For Contact Faces of Flanges: - ASME B16.5 or MSS-SP-6 + Surface Quality Visual Method: MSS-SP-55 + Sour Service: NACE MR-01-75 or MR-01-03 + Marking System: MSS-SP-25 + Option: Locking Device + Live Loading(Belleville Spring)
LV-16 Forged Steel Gate Valve + Basic Design : API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness : ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face : API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
LV-16 Forged Steel Check Valve + Basic Design: API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness: ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face: API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
LV-16 Forged Steel Ball Valve + Basic Design: API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness: ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face: API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
MV-26(L) Wafer, Lever +Type of Body: Wafer +Flange: JIS 5K/10K,ANSI 150LBS,PN 6/10/16(BS 4504) +Operator: Lever +Material : - Body : Cast iron, Cast Steel, Ductile iron, Stainless Steel - Disc : Stainless steel, Aluminium bronze - Seat : EPDM, NBR, PTFE, SILICONE - Stem : Stainless Steel + OPTION : - Lug body - Flange body
MV-26(G) Wafer, Gear +Type of Body: Wafer +Flange: JIS 5K/10K, ANSI 150LBS, PN 6/10/16(BS 4504) +Operator: Worm Gear + Material:: - Body : Cast iron, Cast Steel, Ductile iron, Stainless Steel - Disc : Stainless steel, Aluminium bronze - Seat : EPDM, NBR, PTFE, SILICONE - Stem : Stainless Steel + OPTION - Lug body - Flange body
MV-26 Flanged, Lever
AVP-14(D,S) AL, Pneumatic +Type of body: Wafer +Flange: JIS 10K +Face to face dimension: ISO 5752 +Top flange dimension: Bolt hole ISO 5211 +Max. Pressure: 10 kg/cm2 (0.98MPa) + Material : - Body : Aluminum Alloy Diecast (ADC-12) - Disc : Stainless Steel (304, 316) - Stem : Stainless Steel (304, 316) - Seat : EPDM, NBR +Max. Temperature : - EPDM (-20 c to +120 c) - NBR (-10 c to +80 c) + Test : - Body = 15 kg/cm2 (1.47MPa) - Seat = 11 kg/cm2 (1.08MPa) + Light weight & compact +OPTION - Long bonnet
AVE-15 H/P 10K, Electric + Type of body: Wafer + Flange: JIS 10K/20K, ANSI 150LBS + Face to face dimension: ISO 5752 + Top flange dimension: Bolt hole ISO 5211 + Stem dimension: Square drive to ISO 5211 + Double eccentric (offset) disc + Material : - Body : Ductile iron, Cast steel - Stainless steel (304, 316) - Disc : Stainless steel (304, 316 & 316L) - Stem : Stainless steel (304, 316, 316L & 630) - Seat ring : PTFE, RTFE, Metal + Vacuum equipment (up to 10-5 Torr) + Max. Temperature : - PTFE (-60 c to +160 c ) - RTFE (-60 c to +200 c ) - Metal (-120 c to +450 c ) +OPTION - Lugged body - Long bonnet - EXA : Explosionproof Eexd�BT4 (RE-010~060) - WTA : Watertight Enclosure (IP68) - PCU : Proportional Control Unit (in/out, 4~20mA, 0-10VDC) - PIU : Potentiometer (1K~10KΩ) - CPT : Current Position Transmitter (output 4~20mA) - DCM : 24VDC Motor (RE-006~060)
LV-03 Globe Valve + Basic Design: BS 1873 + Body Wall Thickness: API 600(Heavy Wall) + API 603(Light Wall), ASME B16.34 + Pressure Rating: ASME B16 34 + Face To Face: ASME B16.10 / ISO 5752 / BS2080 + End Connection: - ASME B16.5(Raised Face) - ASME B16.25(Butt Weld) - ASME B16.34(Ring Joint) + Body Bore Size: ASME B16.34 + Flange Size: ASME B16.5 + Inspection And Testing : API 598 / Sour Service(NACE MR 0175 or MR 0103) + Surface Quality Visual Method : MSS-SP-55 + Finishes For Contact Faces of Flanges : ASME B16.5 or MSS-SP-6 + Marking Standard : MSS-SP-25 + OPTION * Drain Plug(ASME B16.34 / MSS-SP-45), Threads(ASME B1.20.1) * Locking Device * Live Loading(Belleville Spring) * Jacketed(Semi & Full) * By-pass Piping & Valve(MSS-SP-45)
LV-04 Globe Valve + Basic Design: BS 1873 + Body Wall Thickness: API 600(Heavy Wall) + API 603(Light Wall), ASME B16.34 + Pressure Rating: ASME B16 34 + Face To Face: ASME B16.10 / ISO 5752 / BS2080 + End Connection: - ASME B16.5(Raised Face) - ASME B16.25(Butt Weld) - ASME B16.34(Ring Joint) + Body Bore Size : ASME B16.34 + Flange Size : ASME B16.5 + Inspection And Testing : - API 598 / Sour Service(NACE MR 0175 or MR 0103) - Surface Quality Visual Method : MSS-SP-55 - Finishes For Contact Faces of Flanges : ASME B16.5 or MSS-SP-6 + Marking Standard : MSS-SP-25 + OPTION * Drain Plug(ASME B16.34 / MSS-SP-45), Threads(ASME B1.20.1) * Locking Device * Live Loading(Belleville Spring) * Jacketed(Semi & Full) * By-pass Piping & Valve(MSS-SP-45)
LV-08 Dual Plate Check Valve + Basic Design: API 594 + Body Wall Thickness: API 594 + Pressure Rating: ASME B16.34 + Face To Face : API 594 or API 6D + Body Bore Size : ASME B16.34 + Flange Size : - ASME B16.5 for 24" & below size / - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing : API 598 / Sour Service(NACE MR 0175 or MR 0103) + Surface Quality Visual Method : MSS-SP-55 + Finishes For Contact Faces of Flanges : ASME B16.5 or MSS-SP-6 + Marking Standard : MSS-SP-25
LV-12 Butterfly Valve + Basic Design: API 609 / MSS SP 67 + Body Wall Thickness: API 609 +Pressure Rating : ASME B16.34 +Face To Face: API 609 / ISO 5752 / MSS SP 67 +Body Bore Size: ASME B16.34 + Flange Size : - ASME B16.5 for 24" & below size / - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing : - API 598 / Sour Service(NACE MR 0175 or MR 0103) + Surface Quality Visual Method : MSS-SP-55 + Finishes For Contact Faces of Flanges : ASME B16.5 or MSS-SP-6 + Making Standard : MSS SP 25
LV-11 Butterfly Valve + Basic Design: API 609 / MSS SP 67 + Body Wall Thickness: API 609 + Pressure Rating: ASME B16.34 + Face To Face: API 609 / ISO 5752 / MSS SP 67 + Body Bore Size : ASME B16.34 + Flange Size : - ASME B16.5 for 24" & below size / - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing : - API 598 / Sour Service(NACE MR 0175 or MR 0103) + Surface Quality Visual Method : MSS-SP-55 + Finishes For Contact Faces of Flanges : ASME B16.5 or MSS-SP-6 + Marking Standard : MSS-SP-25
LV-15 Knife Gate Valve + Basic Design: MSS-SP-81 + Body Wall Thickness: ASME B16 34 + Pressure Temperature Rating : ASME B16.34 + Face To Face: MSS-SP-81 + End Connection: ASME B16.5(Raised Face) + Body Bore Size: ASME B16.34 - Flange Size : ASME B16.5 or MSS-SP-81 + nspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16.5 or MSS-SP-6 + Surface Quality Visual Method: MSS-SP-55 + Marking System: MSS-SP-25
