The equipment inside the tank by a special vibrating motor causes vibrations in the 3D finishing ston as a product formed in the vertical and horizontal rotation of the finishing surface of the product is.
Suitable for mass production is a continuous vibration Finishing machine. Feed products produced from the equipment through the committed and then automatically finishing, polishing, and then the automatic sorting, washing, drying (optional) can finish up with a Cycle.
In the existing standard of the product put the vibration of the Finishing machine, Finishing, selection, drying process, and because of the need to work independently of time and personnel consuming process and the appropriate quality, for it is difficult to expect to solve the problem of best measures to achieve the conditions caused by a combination of each standard auto lines were configured. This automated line with a minimum of personnel to maximize the amount of work to achieve equalization of the product will provide the optimum conditions.
Rolf mini Finishing machine with a Imitation security vulgar, dental parts, and is useful for finishing small parts such as confined space and noise in the ease of operation has the advantage that almost naji. The basic structure of one trillion finishing polyurethane-TUB, upper drum, disc, drum consists of the lower drum and disc problems between the media to improve the fitting of a small media can be used seamlessly.
1.GAP in the Finishing-Stone, Part sculpture does not pinch PUMP between GAP has been dismissed by the water and the water frozen OVER-FLOW HOLE in the top of the wall through the machines installed in the lower three-sedimentation-filtration tank is vented to precipitate was filtered again PUMP The water is put through by the GAP. GAP and GAP problems that occur in this way also significantly reduced wear. 2.GAP Finishing-Stone, or the angle it does not pinch the part was manufactured. 3.Despite improvements such as more, GAP If there is a wear and tear on, GAP and many times without changing the adjustment has been designed to be used. 4.Hydraulic CYLINDER used, the compressed air can be used alone without the electric. 5.Injection and exhaust products to happen on one direction, it is convenient to the worker.
Barrel rotation by the distance of the movement parts are Polishing by the friction between the abrasive material and the bulk of the products and machinery, general products that are suitable for demanding, Barrel-box selection of the rotational speed and Polishing time is important.
Product Features: Washing and screening products available at the same time Increased productivity Applied to automated lines
Product Features: Automatic sorting Apply automation line Increase productivity
Product Features Low vibration, low noise design Excellent abrasion resistance Central control system Excellent abrasion resistance Labor cost savings
Product Features: Low vibration, low noise design Semi-automatic system High speed / bulk dry Excellent abrasion resistance Labor cost savings
Product Features: Small parts for easy drying For work in tight spaces
Custom-made to customers exact specifications is a centrifugal finishing machine . You want a special grinder for your type of customization is a centrifugal finishing machine Features: Low vibration / low noise design, the central control system, high speed / large abrasive diskdrum adjustable, abrasion resistance, labor costs
Product Features. COMPACT with a design to minimize the installation area Automatically achieve high quality production by spraying lapping powder. Constant speed, quiet operation improves workability as.
Product Features: By adopting water-cooled apparatus was Plate improvement of the thermal deformation of Plate to the integration of the driving parts mounted on GEAREDMOTOR and VECTOR INVERTER SOFT START, SOFT STOP prevent chipping driving single side rapping an existing cross-section of a special design based on the weakness of the central abrasive removes congestion
Product Features: By adopting water-cooled apparatus was Plate improvement of the thermal deformation of Plate to the integration of the driving parts mounted on GEAREDMOTOR and VECTOR INVERTER SOFT START, SOFT STOP prevent chipping driving single side rapping an existing cross-section of a special design based on the weakness of the central abrasive removes congestion
UA Type ZA or simple selection device built into the machine after completing a finishing damper selection promoted by a network of parts-off wheel and come up and finishing stone selection operation is done go back into the interior parts of the tank is vented to the outside.
The blood of various steel and nonferrous metal tribute series caused burr removed after molding, chamfering, etc. Removal of scale that occurs after the heat treatment is ideal for plating or coating before finishing polishing, polishing is suitable for glossy
The overall operating principle is the same as the vibration Finishing machine and a large long to mention if the product is useful.
Suitable for mass production is a continuous vibration Finishing machine. Feed products produced from the equipment through the committed and then automatically finishing, polishing, and then the automatic sorting, washing, drying (optional) can finish up with a Cycle
The Finishing-machine Polishing tank with a fixed wall and the bottom half is comprised of the rotation and the bottom half of the rotation while rotating parts by centrifugal force and secure the wall-off wheel to push strongly naemyeo incurred on fixed-wall back-off wheel and rotating parts in half fixed back wall pushes back on the materials. Polishing-stone in the process of vortex formation, and parts and rubbing each other by strong cutting force occurs to me, or gloss. Despite these advantages, this machine is something they have not been widespread, in the GAP between the fixed wall and the crank-off wheel is no debris or parts stuck Many times, if a machine fails, the GAP is easy to wear, such as PU Lining Replacement, A / S in the because there were problems. However, we fully resolve these problems, the machine is a revolutionary machine. 1.Polishing-stone pieces or parts to GAP does not pinch, GAP between Pump is dismissed by the water, and water retention OVER-FLOW HOLE in the top of the wall through the machines installed in the lower three-sedimentation-filtration-tank emissions , and precipitation-water is filtered again by the Pump will be put through GAP. In this way, the actual results of using the GAP that occur in this problem did not occur, GAP was gonna wear significantly. 2. The angle of GAP Polishing-stone, or parts have been manufactured so that it caught. 3. Despite improvements such as more, GAP If there is a wear and tear on, GAP and many times without changing the adjustment has been designed to be used. 4. Hydraulic Cylinder used, the compressed air can be used alone without the electric.
