We have alot of used phones, tablets and laptops.
Processor : Intel Pentium Intel Core Display : 13.3" QHD+(3200 x 1800/WQHD(2560 x 1440) / FHD (1920 x 1080) 16:9 VGA : Intel¢ç HD Graphics HDD : 500GB/1TB RAM : 4G / 8G SSD : M.2 SSD
Fingerprint Identification Using semiconductor live fingerprint collection technology, effectively prevent guard cheating,the days of guard tour fakery are over.
Single Phase to 3 Phase Converter, MY-PS-30 Model, Suitable for 25HP(18.5Kw) 75 Amps 200-240V 3 Phase Motor, DPS Should Be Used for One Motor Only, Input: 220V, Output 200V-240V, Digital Type DPS is a device that runs a 3 phase motor from single phase power and is a digital type phase converter that can be used for various machines at your workshop and home. We produce a wide range of product, so please choose the appropriate horsepower DPS according to the installation and specification and application. - Features of DPS 1. DPS can run 3 phase motor from single phase 2. Digital Type Phase Converter 3. Excellent start-up torque 4. Efficiency is excellent versus other phase converter 5. Small size & easy to install 6. Low failure rate 7. Keeps out dust, moisture, and heat due to the sealed type 8. Designed to be non-flammable 9. Doesnâ??t make any high frequency 10. Lower power consumption
Single Phase to 3 Phase Converter, MY-PS-20 Model, Suitable for 15HP(11Kw) 45 Amps 200-240V 3 Phase Motor, DPS Should Be Used for One Motor Only, Input: 220V, Output 200V-240V, Digital Type DPS is a device that runs a 3 phase motor from single phase power and is a digital type phase converter that can be used for various machines at your workshop and home. We produce a wide range of product, so please choose the appropriate horsepower DPS according to the installation and specification and application. - Features of DPS 1. DPS can run 3 phase motor from single phase 2. Digital Type Phase Converter 3. Excellent start-up torque 4. Efficiency is excellent versus other phase converter 5. Small size & easy to install 6. Low failure rate 7. Keeps out dust, moisture, and heat due to the sealed type 8. Designed to be non-flammable 9. Does not make any high frequency 10. Lower power consumption
30W-ICS Repeater: Interference Cancellation System (ICS) Repeater is a personal network enhancement device with inbuilt Interference Cancellation System ICS Repeater system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
A DAS is a system of managed hubs and remote antennas that distributes a wireless signal to a series of connected indoor or outdoor multi-band, multi-technology radio heads. ... A main hub takes that signal, digitizes it, and distributes it to other hubs and radio heads via a high-bandwidth fiber optic network
Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction. Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc. Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.
The RF front-end stage of the communication system is composed of passive devices such as a filter, a duplexer, a power combiner, an RF connector, and an RF switch. These passive devices are designed to maintain the possible linear characteristics in the operating range, but they have practically nonlinear characteristics. Passive intermodulation occurs when two or more different frequencies are used as inputs to a passive device having nonlinear characteristics. This phenomenon is called Passive IM (PIM). Intermodulation (PIM) signals are added as unwanted noise to an uplink band in a mobile communication system, which is a major noise source that deteriorates the signal to noise ratio (SNR). Therefore, the intermodulation (PIM) signal, which may cause a lot of losses in terms of operation, maintenance, and frequency use efficiency of the mobile communication system equipment, should be removed. A system for removing an intermodulation (PIM) signal existing in an uplink band of a mobile communication system is called a PICS (Passive Intermodulation Canceller System).
The Single Band LTE Repeater is a cell phone signal booster system made up of antennas, cable and a signal amplifier that takes an existing cell signal, typically found outside your home or office, amplifies the signal and then broadcasts it to an inside area that has a weak or no signal.In order for the system to work, there must be an existing, stable outside signal for the system to receive and amplify It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Dual Band LTE Repeater also known as cell phone repeaters were developed to address the two factors that cause poor cell phone reception. They're designed to amplify a weak outside signal and bypass any obstructions to provide a strong inside signal to an area that was originally lacking.The system works by mounting an outside antenna in a location that currently has signal, which is typically on the roof. The signal is passed from the outside antenna, by a cable to a signal amplifier inside the building. Once the signal is amplified, it is then sent to an inside antenna, where it is broadcast out to the area which needs better reception. The system also works in reverse, with the signal from your phone being amplified and broadcast back to the tower, ensuring strong, two-way communication.
Dual-Band LTE Repeater is used to improve network coverage of mobile phone in home and offices.Dual-Band LTE Repeater is a complete network coverage solution for areas which face problems like disturbance in call, call drops and less network signals. Dual-Band LTE Repeater is placed at a network rich area from where it catches signals from the nearest tower and these signals are transmitted to the area facing the signal problem.It can be applied at meeting rooms, conference rooms, museums, galleries, theaters, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, bus and more Places that require silence, confidentiality and information security
5W-ICS Repeater: The 5W High Power 2G 3G 4G Cell Booster Long Distance ICS Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). The ICS Repeater (Interference Cancellation System) is a new kind of single-band RF repeater that can automatically detect and cancel the interference signals caused by oscillation of RF feedback between the Donor and Coverage Antennas in real time by adopting DSP (Digital Signal Processing) technology. It can continuously and stably cancel the interference signals and be adapted to any changes in the surrounding RF environment.
Limit Switch Box (SUS) + enclosure: Weatherproof IP67 + Body(Housing): 304 stainless steel * Economical price. * Housing and brackets are all made of press-formed stainless steel. * The mounting bracket designed can adjust the height. * Lightweight and robust design.
E-06 Limit Switch Box +Enclosure: weatherproof IP67 +Switches: 2 x mechanical switch (option: proximity sensor) +Cable entries: 2 x NPT1/2 in +Position indicator : 0~90 open(yellow)/closed(red)
APL-5N series Limit Switch Box (Explosion) +Enclosure: Explosion-proof (Exd IIC T6)., IP67 +Switches: 2 x mechanical switch (option: proximity sensor) +Cable entries : 2 x NPT3/4 in +Position indicator : 0~90 open(yellow)/closed(red)
- dpc-series : dual , single pressure control, Switch & gauge type spdt - mpc-series : dual, single , oil pressure Control, switch & gauge type spst - pressure range: low -1-50kgf/cm2g, High -1-50kgf/cm2g, High differential 3 fixed kgf/cm2g, Low differential 0.1kgf/cm2g, Reset low auto, reset high auto/manual, Pressure connection 7/16-20 unf (1/4 in flare ), mounting any position, Voltage 12/24/240, includes nema 1 enclosure, Nonconductive cover r-12, r-22, r-134a and R-404.410a.407.Co2 commercial refrigeration and air conditioning - rapid trip (pressure measurement speed: 1:1) - built-in gas temperature indicator for each coolant - pressure display in kgf/cm2, mpa, bar, and psig - built-in oil alarm delay timer - built-in rs-485 communication function program (optional)
T-Bridge stands for "Telephone Line Communication", Which enables high speed data transmission through telephone cables. Besides Telephone cables, any types of copper cables such as coaxial cables, speaker cables, and UTP cables can be applied. T-bridge can save network construction cost dramatically as it can utilize existing copper cables already wired.
EMS solution monitors the status of server by using TCP/IP, SNMP, and ICMP protocols and by installing three applications (EMS agent, EMS server, and EMS monitoring) as well as sends an alarm by means of mail, SMS, and monitoring message according to user definitions in order to respond to server errors in a prompt manner. The solution aims at integrated management of various call center systems and network devices. These results re-gather their feedback on the target value is more accurate and valid gapeurosseo is utilized.