One component type of non-tar water based polyurethane coating unit packing: 22kg/pail, 28kg/pail 20ft loading: 798pails(22kg/pail), 665pails(28kg/pail)
spray-applied, flexible, two-component(Part A ISO and Part B AMINE), rapid curing polyurea system, designed as a waterproofing and protective coating set packing : part A(220KG/DR) part B(200KG/DR) container loading : 40sets/20ft con
Water-based crylic emulsion adhesives, PSAs (Pressure Sensitive Adhesives), waterborne PUD (Polyurethane Dispersion) and AUD (Acrylic Urethane Dispersion)..
Powder coating.
ACRYCOTE APC-200 is a pure acrylic emulsion for paper coating that exhibits an excellent water resistance, heat sealability, and a high performance of vapor barrier. ACRYCOTE APC-200 is designed to be environment-friendly, meeting the food-packaging standard of the U.S. Food and Drug Administration (U.S. FDA). When applied to coating material for food containers such as disposable paper cups and plates, ACRYCOTE�® APC-200 helps the waste- and environment-conscious communities to further conserve natural environment by making it much easier to recycle/reuse a valuable resource of virgin pulp that is made into disposable paper containers for food.
ACROTEK® AP-6130 is a pure acrylic copolymer emulsion binder designed to give an excellent outdoor durability and adhesion, being used under damp or dry condition for textured paint and emulsion floor paints, having an excellent adhesion to various surfaces, durability and abrasion resistance for a highly filled texture paint binder, and being suitable for a high quality exterior high- or semi-gloss paints.
ACROTEK® ARM-205 polymer emulsion binder is an all-acrylic emulsion for fast-dry waterborne road marking paints with improved durability. Road-marking paints based on ACROTEK® ARM-205 polymer emulsion binder feature fast dry over a broad range of application conditions and excellent durability in terms of retention of glass beads for night visibility and wear properties over asphalt, concrete and old markings. ACROTEK® ARM-205 possesses the quality of excellence. - Improved durability: Superior wear properties over various bituminous and concrete road surfaces - Fast dry: Fast dry and resistance to early rain showers under a wide range of climatic conditions - Enhanced retention of glass beads: Excellent long-term night visibility - Environment-friendly: Ultra-low V.O.C.s - User friendly: Non-flammable, water clean-up, reduced disposal costs, increased worker safety
Paint thinner.
Various interior and exterior paints. All eco-friendly products Same quality as European products while nearly a half price from their prices 30 years of know-how and experiences
1) Product type : I, L 2) Size : SSSS(0.4mm), SSS(0.7mm), SS(0.8mm), S(1.0mm), M(1.2mm) 3) Superior DuPont Nylon bristles used 4) Brush shape : â?³, â?¡ 5) German High Strength Stainless wire used 6) Made in Korea, Germany 7) Bulk shipment 8) Design, color, size customized 9) The best quality with reasonable price
** Airless Spray Gun HK-747 OMEGA ** Features [HK-747 OMEGA] - Enhanced precaution for musculoskeletal disorders through soft operation - 30% discharge pressure improved compared to existing models - Dual safety system - Improved leak prevention with faster closing speed of the needle ** Technical Data [HK-747 OMEGA] - Max. Working Pressure : 720kgf/cm² - Burst Pressure : 1,400kgf/cm² - Cast-iron Material : Forged Aluminum - Weight : 480g
** Coating Thickness Measurement MINITEST 650 - This measuring instrument is widely used, particularly for general purpose. Measured values and statistics can be printed out by means of a portable printer(purchased separately). ** Usage - Quick and accurate nondestructive coating thickness measurement ** Features - Practically small size - Built-in function of statistical analysis function - An improved keypad mold - Improved operating system for accurate measurement - Coating iron and metal with all kinds of nonmagnetic materials such as paint, enamel, chromium, zinc, etc. ** Technical Data [Part No. MINITEST 650] - Measuring Range : TYPEF(Ferrous Metal) : 0~3,000 micro meter / 120mils TYPEN(Nonferrous Metal), FN(Common Use) : 0~2,000 micro meter / 80mils - Measuring Accuracy : +-2 micro meter (0.08mils) or +-2% - Min. Curvature Radius : Convex 5mm / 0.2", Concave 25mm / 1" - Min.Area for Measurement : 20mm / 0.8" - Min. Base of Thickness : 0.5mm / 20mils(F), 50 micro meter / 2mils(N) - Display : Display 4 digits (11mm / 0.44") - Measuring Unit : micro meter - mils - Calibration : Standard, 1 Point, 2 Point. - Statistic : x, s, n(Max. 9999), Min., Max. - Interface : USB - Battery : 3 Micro AAA battery(More than 10,000 Measurement) - Dimension(LxWxH) : Body 70x122x32mm, Probe 15 dia.x62mm - Temperature : Body 0~50 celsius degree, Probe -10~70 celsius degree
** Airless Paint Sprayer HK-421 ** Features [HK-421] - Convenience of repair & maintenance - Low-noise design to remove hearing trouble - Reduced freezing with mounted air jet system - Typical fluid handled : Inorganic-zinc, Tar-epoxy, Alkyd, Urethane, High viscosity paint - Application : Container, Pier.Pipe coating, Drum coating, Heavy anti-corrosive coating ** Technical Data [HK-421] - Pressure Ratio : 42:1 - Max. Delivery : 20L/min. - Operating Air Pressure : 3~6.5kgf/cm² - Max. Discharge Pressure : 273kgf/cm² - Dimension(LxWxH) : 68x72x100cm - Weight : 80kg - Noise : 70~80dB - Air Motor Stroke : 120mm
** Airless Paint Sprayer HK-331 ** Features [HK-331] - Low-noise design - High pressure pump of 214kgf/cm² comparing with small size pump - Low-freezing design - Application : Timber products, Finishing coating, Heavy anti-corrosive coating
** Airless Spray Gun HK-300 ** Technical Data [HK-300] - Max. Working Pressure : 500kgf/cm² - Cast-iron Material : S45C - Weight : 680g
** Fluid Heater HK-HPFH 100 / HK-HPFH 200 ** Features [HK-HPFH 100 / HK-HPFH 200] - The optimum temperature control for high viscosity paint & solid coating - Provides operating temperature range of 32~102 celsius degree - Provides outstanding corrosion resistance and high heat conductivity and responsibility through aluminum body design - Compatible with most paint available to inject pump ** Technical Data [HK-HPFH 100 / HK-HPFH 200] - Rated Voltage : 220V / 440V - Power Consumption : 3KW / 3KW - Rated Pressure : 500bar / 500bar - Fluid Pipe Diameter : 10.4mm / 10.4mm - Degree of Temperature Accuracy : +-1.8 celsius degree / +-1.8 celsius degree - Weight : 18kg / 18kg
** Auto Gun HKBP-100 - Operating Pressure : 500kgf/cm² - Operating Air Pressure : 3~7kgf/cm² - Weight : 510g - Dimension(LxWxH) : 75x50x100mm - Body Material : A6061
**Portable Dual Component Airless Paint Spraying Equipment HK-PDP-2000 **Features [Part No. HK-PDP-2000] : Easily portable dual liquid equipment, High-quality coating due to the applied paint hearing machine(A main material and a hardener), Shortened drying time, Paint for heating is available, Adjustable depending on the dilution ratio of a main material and a hardener, 1:1 to 2:1 when applied displacement pumps are the same size **Technical Data [Part No. HK-PDP-2000] - Pressure Ratio : 74:1, Ratio Range : 1.2:1~2.4:1, Max.Delivery : 13.2L/min., Max.Cycle : 50cpm, Output per Cycle : 265cc, Operating Air Pressure : 7kgf/cm², Max. Discharge Pressure : 518kgf/cm², Dimension[LxWxH] : 140x90x165cm, Weight : 440kg, Noise : 80dB, Air Motor effective Diameter[Main] : 321mm, Air Motor Effective Diameter(Feeding) : 203mm, Air Motor Stroke : 120mm
**Portable Dual Component Airless Paint Spraying Equipment HK-PDP-2000 **Features [Part No. HK-PDP-2000] - Easily portable dual liquid equipment - High-quality coating due to the applied paint hearing machine(A main material and a hardener) - Shortened drying time, Paint for heating is available - Adjustable depending on the dilution ratio of a main material and a hardener - 1:1 to 2:1 when applied displacement pumps are the same size **Technical Data [Part No. HK-PDP-2000] - Pressure Ratio : 74:1 - Ratio Range : 1.2:1~2.4:1 - Max.Delivery : 13.2L/min. - Max.Cycle : 50cpm - Output per Cycle : 265cc - Operating Air Pressure : 7kgf/cm - Max. Discharge Pressure : 518kgf/cm - Dimension[LxWxH] : 140x90x165cm - Weight : 440kg - Noise : 80dB - Air Motor effective Diameter[Main] : 321mm - Air Motor Effective Diameter(Feeding) : 203mm - Air Motor Stroke : 120mm
High-performance Dual Component Airless Paint Spraying Equipment HK-PFP-2000 Features [ Part No. HK-PFP-2000 ], No need for organic solvents, Heatable depending on the conditions of a main material and a hardener, Adjustable depending on the dilution ratio of a main material and a hardener, 1:1 to 3:1 when applied displacement pumps are a same size, Only used for fire-proof paint [CHARTEK7] **Technical Data [ Part No. HK-PFP-2000 ] - Pressure Ratio : 53:1, Ratio Range : 1.5:1~4.5:1 - Max. Delivery : 16.2L/min., Max. Cycle : 50cpm, Output per Cycle : 365cc, Operating Air Pressure : 7kgf/cm² - Max. Discharge Pressure : 372kgf/cm , Dimension [LxWXH] : 210x135x216cm, Weight : 1,890kg, Noise : 80dB, Air Motor Effective Diameter(Main) : 321mm, Air Motor Effective Diameter(Feeding) : 203mm, Air Motor Stroke : 120mm