Sports wear, casual wear.
Sports wear and industrial textile , ultra light fabric.Shipment
Material : Graphite, PTFE, etc. Application : - Valve - Pump (Power plant, boiler water supply and condensate pump, etc.) - SOOT BLOWER - All other places requiring efficient sealing in the factory Feature : This braid packing adds the molybdenum-based anti-corrosion agent to the high purity flexible graphite tape at below 50ppm Chloride which is equivalent to the nuclear power level with high degree of thermal conductivity and low coefficient of the friction, and it is the multi-purpose packing designed for use of both valves and pumps as it is more endurable with the continuous filament carbon fiber inside the braid as well as the graphite inside in order to be endurable at high RPM and pressure. Therefore it is not necessary to use End Ring for prevention of extrusion. Moreover, the most optimal flexibility is guaranteed with the special braiding technology of DONGSUH ALS900G, so that the adjustment or harmonization with the shaft or stem is outstanding as the entire distribution is uniformed even if it is mounted in any shaft or stem size. No wearing or scratching of the shaft or stem can be found due to the self-lubricating function of the high purity graphite while decreasing the packing life span significantly. DONGSUH ALS900G is suitable for overall conditions in the factory such as valve and pumps, etc. Using with ALS350 Graphite Molding Packing as End Ring will get better sealing effect.
- Design Pressure : 2.3MPa - Volume capacity : 100~1000kg/hr - Material : SUS304 - Standard/Certificate : Registered a patent for practical new design of devices preventing fluids-flow out of electro thermal hot water carburetor, Registered a patent of practical new designs for liquefied gas using waste heat coolant.
Al-Brass: Al-Brass is an alloy containing aluminium. It is frequently used for heat exchangers due to its high corrosion and seawater resistance property. Application: Condenser for thermal/nuclear power generation, condenser for vessels, feedwater heater, etc. Al-Brass : C4430/KSD5301 Al-Brass : C6871/KSD5301 Al-Brass : C6872/KSD5301 Al-Brass : C6872/KSD5301
An electric generator is classified roughly into physical instrument and chemical instrument. The physical generator includes water-power, thermal-power,atomic-power, wind-power, and other generators. The chemical generator is divided into primary cell (battery)and secondary battery. The primary cell is generally disposable, while the secondary battery can be used again after charging.
An electric generator is classified roughly into physical instrument and chemical instrument. The physical generator includes water-power, thermal-power,atomic-power, wind-power, and other generators. The chemical generator is divided into primary cell (battery)and secondary battery. The primary cell is generally disposable, while the secondary battery can be used again after charging.
Balem 411 is designed to be as hydraulic liquid level control valve in a reservoir. Its working principal is controling flow by a ball inside the body as float arm moves up and down against weight and buoyancy of water level. It is applicable at high pressure flow as it is opened and closed by rotation of ball. It's corrosion resistance and thermal resistance is excellent. Moreover, it is easy to carry and install.
Balem 431 is a float operated hydraulic liquid level control valve suitable for tanks and reservoirs. Its working principal is controling flow with a modulating float pilot valve, alternatively a Balem 511 can be adjusted up to 1.2m on/off differential. The body is coated by epoxy to prevent contamination of the liquid, and has excellent thermal resistance. The valve is extremely easy to maintain as no special tools or skills are required.
Balem 441 is a float hydraulic liquid level control valve for use in reservoirs. It is a solenoid operated hydraulic control valve. In case if power failure, it can be overridden mechanically by installing a pilot valve. It is suitable for and safe at high pressure flow as it' s opening and closing is both by solenoid and mechanical pilot valve. It' s corrosion resistance and thermal resistance is excellent, and it will not contaminate the line fluid.
Capacity ------------------------------------ up to 4000 cmm Pressure ------------------------------------- up to 200 mmaq Inlet size --------------------------------- 300 up to 2000 mm Casing thickness -------------------------- 1, 5 up to 16 mm Impeller types ------------------ ac, as (adjustable pitch) Motor frame size ------------------------------- 63 up to 315 - electricity supply ; single or three-phase to suit a wide range of voltages and frequencies - motors maker ; korea & overseas ex e, ex d Drive type ----------------- coupling-, belt- or direct drive Casing form? combined casing, swing out shot casing Surface treatment --- primer, finish, hot-dip galvanized Material -impeller --------- cast aluminium, engineering plastic -casing -------------- steel , aluminium, stainlesssteel Thermal & ip protection
Weight Measurement Function: By Hours, minutes and seconds unit, Display the status of the usage of liquid gas and it can be used being installed on storage tank or tank lorry and can be carried as a portable measuring instrument. PC Monitoring Function: As the remained liquid goes below 10% of its capacity, it automatically alarms to supplement liquid gas. Thus, the appropriate time for supplement of liquid gas can be decided on time. Alarm Function: the liquid remaining of the storage tank is less than 10%, The alarm sound provides information that you can setting the a liquid supply time. Diversity Of Power Supply: Use the usual 220volt electric, in case of power outage, the built-in battery will supply the charged electricity, in addition built-in battery is operated and available for tank lorry using the car battery. Option (Printer : additional purchase): Receipt Output Function; Portable thermal transfer printer can use the output value measuring of storage tank and tank lorry without visiting a long measuring place directly by the output as a receipt.
Textile like clothes, denim, t shirt, polo shirt, jacket, sweater, lingerie, formal & casual shirt, blazer, leather product like raw leather, readymade shoe, bag, belt, wallets slg.
We intend to export dust protection and virus protection and manufactured in Korea to your market. Please refer to attached image of our special mask. Our medical mask is approved FDA with KF95. As you know, KF94 is the same with N95 in USA and KN65 in China. We are willing to negotiate with you at a good price for mutual benefit. If you are interested, please contact us. Price and other conditions. 1. Price per piece : Negotiable according to quantity. the price of one piece is about USD0.42, FOB terms, Incheon airport. 2. Delivery : Basically FOB trade terms. The freight cost to Incheon airport will be paid by our side.. We prefer shipping by air. 3. Payment T/T in advance. Please comment your thought on above and tell us your wanted quantity. Thanks in advance.
Nice to contact you for the first time. We are willing to introduce Korean face mask sheet for skin caring. Our products, face sheet for skin caring, are mainly made from natural fruit extracts, flowers, leaves, green tea, and charcoal. We make our products with Korean raw material only. The price : USD0.40 per pcs, ExW trade terms. Still negotiable for huge quantity. Payment term : T/T in advance. Please kindly understand and accept. Delivery time : We can ship promptly after your PO. For huge quantity, appox. 7 to 10 days of lead time. MOQ(Minimum quantity for order) : Basically MOQ is 1000 to 10,000pcs. Negotiable. MOQ may be decided by your side. You can order 10,000 units for one specific model type or you can also order 10,000 units for a mix of different models. The product does not use chemical preservatives and uses natural preservatives. You may purchase sample first for considering and test by your side, if you accept. For more negotiation, a formal quotation and more detail information, please kindly reply to us. We really hope to do business with you in the near future. Please refer to attached images. Thanks in advance. V.B.R.
Medical mask, thermal camera for detecting fever..
Ulv sprayer and thermal fogger which can be widely used in all places for disinfection and sterilization..
MAM-3PLY (Mild Steel + Aluminum +Mild Steel) Features : Enhanced formability Enhanced thermal efficiency Reduce weight Excellent strength Application: Automobile
Type:MA-2PLY (Mild Steel + Aluminum) Features: Enhanced formability Enhanced thermal efficiency Reduce weight Excellent strength Application Automobile
ALUMINUM CLAD AMA-3PLY Type: AMA-3PLY (Aluminum + Mild Steel + Aluminum) Features: 1. Improved workability (elongation , strength ) 2. increased strength 3. Cost reduction (15% ) 4. Cost reduction (thin thickness can be applied by improving strength) 5. Aluminum surface can be realized in various colors 6. low thermal expansion 7. excellent thermal conductivity Application - construct - Building exterior - Other
