Johannesburg Sulphur Ore Suppliers and Manufacturers

Product introduction: Calcium is a silvery white metal that is harder and heavier than lithium, sodium, and potassium; It melts at 815 C. The chemical nature of metallic calcium is very active. In the air, calcium is quickly oxidized and masked with an oxide film. When heated, calcium will burn and emit a beautiful glow of brick red. Calcium and cold water have a slower effect, and intense chemical reactions occur in hot water to release hydrogen (lithium, sodium, and potassium can cause intense chemical reactions even in cold water). Calcium is also easily combined with halogens, sulfur, nitrogen, and the like. 1,product name:calcium metal 2,Shape :powder, lump and granulates 3,CAS:7440-70-2 4,Density:1.54g/cm 5,Melting point:850C 6,Boiling point:1440 C(lit.) 7,Application:Wheel keel Product use: At present, in the steel industry, the main use of metal calcium is to process into metal calcium particles, and then to make calcium iron wire or pure calcium wire, and finally used for steel refining outside the furnace, its role is to desulfurization, deoxidation, increase the fluidity of molten steel. Promote the rapid rise of inclusions in molten steel, generally used in the production of high-quality steel; as a dehydrating agent to produce anhydrous alcohol; in the petroleum industry, as a desulfurizing agent, in the metallurgical industry, it is used to deoxidize or desulfurize . However, calcium compounds have a very wide range of uses, especially in the construction industry.

Natural zeolite is a new material, which is used as ion exchange agent, adsorbent, desiccant, catalyst and cement mixture. In petroleum and chemical industry.separation and storage agent hard water softening, seawater desalination agent. In the aspect of environmental protection, it is used to treat waste gas and waste water, remove or recover metal ions from waste water and remove radioactive pollutants from waste water. Main specifications: 1-3mm,3-5mm,>5mm;200mesh,325mesh

Activated 4a zeolite adsorbent powder Xintao Activated Molecular Sieve Powder, has the character of high dispersibility and rapid adsorbability. It is used in some special absorptive circumstances, such as being formless desiccant, being adsorbent mixed with other materials etc. It can remove water eliminate bubbles, increase uniformity and strength when being additive or base in paint, resin and some adhesives. It can also be used as desiccant in insulating glass rubber spacer. Typical Application: (a) 2K-Polyurethane coatings and mouldings. (b)1K-Polyurethane storage protection. (c) Storage protection for metallic pigment paint. (d) Polysulfide and silicone systems. (e) Carriers for chemicals for controlled release. (f) Processing aid for polymer production. (g) Desiccant for the production of polymer desiccant materials. (h) Cosmetics additive. (i) Storage protection additives for highly hygroscopic goods. (j) Additives for flame retardants. (k) Shift of chemical reaction by removal of water as by product. Warranty: By National Standard HG/T 2524-2010. The storage time is more than 3 years. Free consultation during the warranty period.

Ammonium Sulphate is mostly used as nitrogen fertilizer. It provides N for NPK. It provides an equal balance of nitrogen and sulphur, meets short term sulphur deficits of crops, pastures and other plants. Product Specification: Ammoniacal Nitrogen Cont: 21 Pct Min Sulphur Cont.: 23.5 Pct Min Moisture: 1 Pct Max Free Acidity(h2so4): 0.025 Pct Max Arshenic (As As203): 0.01 Pct Max White Crystal: 2-4 Mm Color: Whitish

Dried tomatoes are produced from the sound, whole, ripe, red tomatoes selected, washed with microbiologically controlled water,halved, salted (on client request) and sun dried under controlled conditions and inspected before packaging INGREDIENTS: Tomatoes, Sulphur dioxide ORGANOLEPTICAL REQUIREMENTS Colour: Uniform-Red Tomatoes out off colour uniformity Max. 2% Damaged: Max.3% Inbeded foreign matter: Max.3% Flavour: Characteristic of tomato without off tasted

VHP - Very High Polarization - Brown Sugar - Icumsa 600 - 1200 Sugar from Our Company has the following specifications. Color : ICUMSA 600 to 1200 typical Origin Brazil SPECIFICATIONS: VHP Polarization: 97.8 degree to 99.2 degree Ash Content: 0.15 % max Solubility: 95% Free flowing Color: Brown Radiation: Within internationally acceptable limits Granulation : 0.6 mm of regular square ( medium size) Moisture: 0.15% max Magnetic Particles: 10 MG/K So2 120 MG/K Sulphur Dioxide: 60 MG/K MIN Smell: Free from unusual or abnormal smells Reducing Sugar : 0.05% MAX by weight HPN Staph Aureus NIL MAX AS 1 P.P.M MAX PS 2 P.P.M MAX CU 3 P.P.M Substance Structure : Solid Brown Crystal

SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.

Copper Wire Scrap grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5.. % (Max.) Total impurities...0.3.. % (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle Pure copper scrap 99.99% 1.Copper wire scrap 2.Copper wire,tube,plate,etc 3.High quality:99% Copper Scrap 99% High-quality cable scrap with almost no impurities Single Crystal Copper Wire 1.pure copper scrap 2.Good fatigue/abrasion/corrosion resistance 3.Be the bearing,switch,frame Millberry Cu 99.9%min Wire diameter: 0.30mm, 0.25mm, 0.20mm competitive price. Copper Scrap 99.9% Specification: ITEM TEST RESULT Copper: 99.9% Carbon : 0.03% Phosphorus : 0.01%max Coblet: 0.01%max Sulphur: 0.01%max Iron: 0.005%max Zinc: 0.003%

We are direct manufacturer and exporter of Crud and Refined Rapeseed oil, olive oil, sunflower oil, soybeans oil, jatropha oil, canola oil, Palm oil, virgin coconut oil, Corn oil,Edible oil, used vegetable cooking oil.We need reputable buyers ready to buy and enter into long term yearly, monthly or weekly contracts with our company. We will highly welcome buyers who are willing to travel or send representatives. We would like our first time clients to visit us for viewing, purchase, business discussion, shipment and others, we are happy to welcome you in any of our branches. Contact us to start doing business with us. Sunflower Oil,Corn oil,Soybean Oil,Olive oil,Jatropha oil,Sesame Oil,Palm oil,Coconut oil,Canola oil,Rapeseed Oil,Edible oil,Peanut oil. JATROPHA OIL SPECIFICATION Free fatty acids 3, 5% Max M.I.U(Moisture and Impurities) 0.1 % max Saponification value: 18185-1955-195 Iodine value: 120 Titre C (melting point) 13.75 C Specific Gravity @ 25â??C 0.915 Density (kg/m3) 920 Flashpoint by P.-M. (Degree C) 220 Calorific Value (kj/kg) 36, 000 Kinematic Viscosity (40 deg.C) (mm2/s) Carbon Residue (mass-%) 0.4 Sulphur Content (mg/kg) 16 Contamination (mg/kg) 24 Acid Value (mg KOH)/g) 7.0 Oxidation Stability (110 deg.C)(h) 5.0 (min) Phosphorus Content (mg/kg) 15 Ash Content (mass %) 0.01