Johannesburg Front Engine Suppliers and Manufacturers

2 Stroke 30Hp Long Shaft Outboard Engine Boat Motor 30 HP outboard motor displacement is smaller, it easier for maintenance, will give you performance and reliability for your long days of boating. In many countries (especially for the developing areas) of the world where outboard demand is primarily for commercial uses, the water quality, weather and climate variance and long hours of continuous use make for a very harsh use environment. This is the two stroke outboard motor series developed mainly for commercial use such as on fishing and passenger vessels. This series suits harsh conditions that include everyday use and situations involving long hours of continuous operation. Enhanced strength and durability in locations such as roller bearings, crankshaft and cylinder block, as well as an improved water pump that ensures plenty of cooling effect, combine to deliver substantial improvements in durability and reliability.

USED ENGINE OIL SPECIFICATIONS Test Units Methods Result Density @ 15 �°C ASTM-D4052 0.88 Colour Max ASTM-D1500 6 Flash Point PMCC Min �°C ASTM-D93 70-80 Pour Point - Max �°C ASTM-D97 -7 Viscosity @ 50 �°C Cst ASTM-D445 60 Sulfur Content - Max WT% ASTM-D4294 below 0.5% Water WT % ASTM-D482 3% Appearance - Visual Black Sediment Below 0.5%

Virgin Mercury purity = 99.99% Pure by wt min. - Free from heavy metals - Packing iron cylinder ( 34.5)kg net weight - Physical State: Liquid - Appearance: silver - Odor: odorless - PH: Not available. - Vapor Pressure: 0.002 mm Hg AT 25C - Vapor Density: 7.0 - Evaporation Rate: Not available. - Viscosity: 15.5 mP AT 25 dig C - Boiling Point: 356.72 dig C - Freezing/Melting Point:-38.87 dig C - Decomposition Temperature: Not available. - Solubility: Insoluble. - Specific Gravity/Density: 13.59 (water=1) - Molecular Formula :Hg - Molecular Weight: 200.59 Mercury Packaging: * 34.5kg virgin steel flask

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

Adipic acid is a synthetic fiber, nylon 66, nylon engineering plastics, polyurethane foam, synthetic leather (PU), the main raw material of synthetic rubber and film, also can be used in medicine, pesticides, spices, such as the production of adhesives and soldering flux. Packaging & Shipping Logistics transportation methods can be divided into various ways according to the different transportation means. Different transportation ways had different features.We will consider wholelly and decide according to cargo situation,cargo type,delivery period,transportation cost. Iron drum & plastic drum packaging 1200kg/drum 850kg/drum 200kg/drum&plastic drum 180kg/drum&plastic drum 25kg/plastic drum&Cardboard bucket Plastic bag & kraft paper bag 1200kg/bag 50kg/plastic bag 25kg/plastic bag&kraft paper bag

Products Description Adipic acid is an important organic dibasic acid with the structural formula HOOC(CH2)4COOH. It can undergo salt-forming reaction, esterification reaction, amidation reaction, etc., and can be polycondensed with diamine or diol to form high molecular polymer. Adipic acid is an industrially important dicarboxylic acid. It plays an important role in chemical production, organic synthesis industry, medicine, and lubricant manufacturing. Its output ranks second among all dicarboxylic acids. Application 1. Adipic acid is mainly used in the production of nylon fibers and engineering plastics. 2. It is also widely used in the production of polyurethane and other esters, most of which are used in the production of PU, shoe sole slurry, polyurethane foam, etc., and a small part is used as advanced lubricating oil. 3. Higher esters of adipic acid can be used as plasticizers for polyvinyl chloride and its copolymers, and natural synthetic rubber. 4. A large amount of adipate is used in polyvinyl chloride for food packaging, film and insulation. 5. Adipic acid is also used as an acidulant for various foods and beverages.

Product name: Sodium erythorbate Synonyms: Sodium D-isoascorbate Chemical Formula: C6H7O6Na.H2O Molecular weight: 216.12 CAS No.: 6381-77-7 Description: Sodium erythorbate is a white or yellow white crystalline powder or granules, odorless, has little salt, the melting point is over 200, it is rather stable when being dry exposed to the air, but in the water solution, when there is air, metal, heat and light, the oxidation will occur. It easily dissolves in water; 16g/100ml at normal temperature, hardly dissolves in ethanol, the PH value of 2% water solution is 5.5-8.0. Which complies with the specifications of GB8273-87, FCC for food additives Net Weight: 25kgs/carton. Uses: Sodium Erythorbate is mainly used in foodstuff industry, used as antioxidant, preservative and coloring agent, broadly used in meat food, fish food, beer, fruit juice, syrup crystal, fruit and vegetable tin, cake, dairy produce, confiture, sherry, pickles, and grease etc. the dosage to the meat foods is 0.5~1.0g/kg. To the frozen fish, the fish should be infused in the 0.1%-0.8% water solution before freezing. The dosage in the beverage such as syrup is 0.01%~0.03%, apple and bechamel tin: 0.15g/kg (dosage of single or together with the VC), luncheon meat, cooked meat powder, cooked front leg pork, cooked ham, the dosage is 0.5g/kg (dosage of single or together with the VC and other sodium salt, counted the VC ), for the peach, apple jam: 2g/kg,for the fruit tin, it is 0.75-1.5g/l, for the nature syrup, it is 0.08-0.11g/l, for the beer, it is 0.03g/l (FAO/WHO(1977). Antioxidation property: the antioxidation property of the Sodium Erythorbate is great larger than the one of cenolate (Sodium VC), has no effects to identify the Vitamin C, but it will not persuade the body to absorb and use the Sodium Erythorbate. The body culls the Sodium Erythorbate and changes it into Vitamin C inside the body. The physiological effects of the Sodium Erythorbate is only the 1/20 of the VC on anti-scurvy, but it is approximately same to the VC on drop blood pressure, diuresis, generating of hepatic glycogen, discharging of pigment, detoxifcation. Microbiological: N/A Certificate of analysis: Certificate of analysis must provided for every delivery and must contain results for: * chemical data * lot/batch number * product name *manufacturer/supplier name Packing: Carton with PE liner. Storage: Product must be store in a cool and dry place, Keep every bag PE liner sealed. Shelf life: Minmum 24 months from the date of manufacture. GMO status: Non GMO. Allergen status: Does not contain any know allergens

AS PS ABS PLA HDPE Granules Acrylonitrile - styrene copolymer. Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as engineering plastics.Excellent heat resistance and solvent resistance. Application. 1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases. 2. Special grade: blade of fan, batteries housing, lighters. 3. Refrigerator Sleeves, Miscellaneous 4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling 5. High Transparency, Heat Resistance, chemical resistance PC + Glass Fiber reinforced (GF) The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm. Grade: (ML3410-30 / MH3515-30 / MN-3110-30) 1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF) General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact. Application: Watch parts, switches and nobs, OA equipment. 2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF) Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage and dimensional stabilities. Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames. 3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF) MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance, surface aesthetics and weld line strengths. Applications: Meter cases, electrical and electronic housings.