Functional characteristics:
1.Equipped with full automatic infrared ray induction system and advanced chip controlled technology,it has more steady performance and precise controlling effect.with novel appearance and smooth lines due to professional design.fashionable style due to film screen technology and double color matching,it makes the best combination of the individuation and fashion style.
2.With high-speed motor for special purpose.Guards against the vibration and low noise design,it is high efficient,and only needs 5~9 seconds to dry hands.
3.With imported engineering plastic and metallic paint,it is firm,durable,beautiful and shining.
4.With multi-protection for over temperature,over currency and over time, it is more safe.
5.Easy installation and operation.
Specification:
Model No.:HD-0950
Power:220V~240V or 100V~130V
Rated power:950W
Sensing distance:12+/-3cm
The temperature of hot air:35~50'C
Drying time:5~9seconds
Airflow rate:95m/s
Products dimension:245*177*470 mm.
Material: body of stainless steel built in 2 mm thickness
Dimensions: 275x240x210 mm 4 kg
Infrared detection system
Voltage: 230 V
Heating power: 2300 w
Operating voltage:220 to 240V AC at 50/60Hz
Rated power:900W
Motor power:500W
Power of heating element:400W
Noise level:60-70db
Estimated drying time:10-15s
Meets XPX1 waterproof classification making it practical and safe for use in a wet environment
Shell material:ABS plastic
Unit size:(H)251*(W)220*(D)152mm
Unit weight:4.5kg
Touch screen size:3.5(inch)
Duct stretching ratio: 1:0.3(mm)
159 Electric Hand Dryers Suppliers
Short on time? Let Electric Hand Dryers sellers contact you.
Material goes through the feeding device into the lining of the rotary drum, in order to realize the downstream drying, material inner constantly grabbed, scattered under the copy board of a spiral rolling to realize heat exchange, the material move to the other side of the lining and into the middle side, at this time going counterflow drying, material in the middle are constantly repeated by copy board, it is marching into two steps forward and one back, material in the middle is fully absorb heat coming from the inner cylinder, and absorb the middle roller heat and prolong the drying time again at the same time, at the moment dry material is at the best condition. The material go to the other side of the middle section and into the outer section, material within the outer cylinder in rectangular loop travel , in order to achieve the material moving fast to discharge roller under the effect of drying in hot air . Because of the weight other wet material can't advance rapidly drying, the material returns to this rectangular copy board with fully drying action, in this way it can achieve purpose of drying.
Feature
1.Super Fast Dry-90m/s dual jet air efficient 7 seconds dry time.
2.Hygiene-HEPA Filtration System proven to remove 99.97% of potentially present bacteria at 0.3 microns from the air.
3.Classic Design-Used in London Olympic, Mercedes Benz , Hilton Hotel, Disney etc.
4.Brushless Motor-Start stable and fast with longer lifetime.
5.Energy Efficient-Saving 85% energy than conventional hand dryer and 95% cost savings Vs. paper towels.Saves time, money and energy.
1. Quick Dry105m/s high speed air blow, 10-15 seconds dry time, quick dry for your hands
2. Save Energy80% less energy than conventional hand dryers, 95% cost savings VS. paper towels
3. ABS MaterialDurable ABS polycarbonate, with high strength and good heat resistance
4. Intelligent SystemAuto Temperature Controller adjust based on environment temperature, with LED indicator
5. Removable FilterRemovable Filter, easy to clean and replace
Features
1.Quick dryhigh speed airblow, 10-15 seconds dry time, quick dry for your hands
2.Save energy80% less energy than conventional hand dryers, 95% cost savings vs. Paper towels
3.Durable constructionusing thickness 304 stainless steel one-piece molded cover, stable and durable
4.Intelligent systermsmart heater ajust based on environment temprature, led indicator
5.Hygieneantimicrobial wall guards designed to protect walls from water and inhibit the growth of bacteria
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard.
Product Features
â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%.
â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution.
â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption.
â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying.
â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source.
Application Areas
The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc.
OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS.
Heat Pump Dryer (Direct Fired Dryer)
â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption.
â?¢ Rapid heating, constant to maintain the required drying temperature.
â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated.
â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Item
Unit
HBC85-13-132S
Theoretical concrete conveying displacement (H.P/L.P)
m3/h
60/85
Theoretical concrete output pressure (H.P/L.P)
MPa
13.5/8
Pressure of hydraulic system
MPa
32
Displacement of main oil pump
ml/r
190
Power of main power/rotation speed
kw
132/2200
Main oil pump diameter/pole diameterÃ?stroke
mm
Ï?130/Ï?80Ã?1800
Conveying cylinder diameter Ã? stroke
mm
Φ200�1800
Reversing times (H.P/L.P)
Min.-1
17/27
Hopper capacityÃ?loading height
m3Ã?mm
0.7Ã?1500
Concrete slump
mm
120-230
Theoretical Max. vertical height
M
200
Theoretical Max. horizontal distance
M
600
Capacity of hydraulic oil tank
L
500
Capacity of water tank
L
600
L x W x H
M
6.8Ã?2.3Ã?2.5
Total mass
kg
75000
H.P/L.P Switch
/
Automatic
Remote control
/
Wireless
Reference Chassis Wheelbase
M
4.7
