Dust Collector
JKC series hydraulic dry type dust collector is specially designed for JK's DTH drilling rigs.
It substantially extends drilling rig's service life and protects operators from dust pollution.
Features:
Efficient pulse dust collector, boasting efficient and stable dust collection performance, large air volume treatment capacity, easy operation and excellent cleaning result, long service life and small maintenance workload.
In leading position domestically.
Advantage of
156x156mm 200um High efficiency P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Technology : Diamond wire cutting
Type : P type
Resistance:1~3μs
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Name: High efficiency polysilicon wafer
Technology : Diamond wire cutting
Type : P type
Resistance:1~3
minority carrier:>2
Hem width:157.00~157.25mm
Thickness:200±20μm
Transfer efficiency:>18.8%
Advantage of
High efficiency P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Name: High efficiency polysilicon wafer
Technology : Diamond wire cutting
Type : P type
Resistance:1~3s
minority carrier:>2 s
Hem width:157.00~157.25mm
Thickness:200±20m
Transfer efficiency:>18.8%
Technology : Diamond wire cutting
Type : P type
Resistance:1~3μs
minority carrier:>2 μs
Hem width:157.00~157.25mm
Thickness:200±20μm
Transfer efficiency:>18.8%
Advantage of
P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
http://en.hengxingchinese.com/
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
Technology : Diamond wire cutting
Type : P type
Resistance:1~3μs
minority carrier:>2 μs
Hem width:157.00~157.25mm
Thickness:200±20μm
Transfer efficiency:>18.8%
Advantage of
P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
http://en.hengxingchinese.com/
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
Technology : Diamond wire cutting
Type : P type
Resistance:1~3s
minority carrier:>2 s
Hem width:157.00~157.25mm
Thickness:200±20m
Transfer efficiency:>18.8%
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Advantage of
Sawing Wire for Solar Wafer Cutiing
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
Advantage of
Sawing Wire for Solar Wafer Cutiing
--------
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology
Hengxing Solar Wafer Cutting Diamond Multi-Wire Sawing Ultra Fine Steel Saw Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
Solar PV 1500VDC inline fuse connector 2-30A:
1.Current:2-30A;
2.Voltage:1500VDC;
3.IP68 as TUV approval;
4.Suitable for 10*85 inline fuse;
5.Easy to replace fuse;
6.Suitabe for cable at 2.5-10sqmm.
solar PV harness with inline fuse 1500VDC:
1.1500VDC;
2.With 2-30A inline fuse;
3.With 2.5-10sqmm cable;
4.Support 2in1,3in1,4in1,5in1,and 6in1 or more other solar cable enquiry.
Advantage of
P Type Polycrystalline Solar Wafer
The production process is simple, cost-effective, and reduces silicon waste
High conversion efficiency, low fragmentation rate and low optical attenuation
Manufacturing Specialization, Intelligence and Greening
Customized products to meet customer needs
Hengxing company website: https://hengxingsteelwire.com/
Email contact US:wmsale@hxkjgf.com
Solar BIPV junction box small size:
1.small size with 2.5-4sqmm cable;
2.Nagetive:middle:positive=1:1:1 or 1:2:1 or 1:3:1,three type choose;
3.Max.:15A;
4.With MC3 rubber connector or MC4 connector.
solar MC3 rubber connector for solar system:
1.Rubber material;
2.30A,1000/1500VDC;
3.Suitable for 2.5-6sqmm;
4.the MC3 rubber connector with 2in1 branch connector and panel connector.
