Find Verified Solar Power Equipments Suppliers, Manufacturers and Wholesalers

MPPT Solar Charge Controller
PC1800F Series (60/80/100A) (MPPT)
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
Features:

LCD display , easy to operate on LCD screen

Multi stage charging (3-stage charging , parallel charging and equalized charging function)

BTS Battery remote temperature sensor terminal

Enable to charge Li-thium, Gel , lead-acid battery

With RS485 & USB communication port

Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit

MPPT Solar Charge Controller
PC1800F Series (60/80/100A) (MPPT)
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.
Features:

LCD display , easy to operate on LCD screen

Multi stage charging (3-stage charging , parallel charging and equalized charging function)

BTS Battery remote temperature sensor terminal

Enable to charge Li-thium, Gel , lead-acid battery

With RS485 & USB communication port

Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit

Photovoltaic lightning protection combiner box Model: SDDL-6-1
APPLICATIONS:
Large-scale photovoltaic grid-connected power generation system
To reduce the wiring between photovoltaic modules and the inverter
Improve reliability
FEATURES:
Reasonably simplify wiring, beautiful and generous
Meets outdoor installation requirements
Wide DC voltage input range
Use photovoltaic special fuse
Using special photovoltaic high voltage lightning arrester
Convenient and fast maintenance
Can be customized according to customer needs, optional

TECHNICAL PARAMETERï¼?
Model SDDL-6-1
Photovoltaic parameters
Nominal working voltageUn 1000V DC
Single input short circuit current 10A
Number of input ports 6
Number of input ports 1
Lightning protection parameters
Nominal discharge current�8/20μs� 20KA
Maximum flow capacity�8/20μs� 40KA
Protection level�8/20μs� �3000V
Response time Ta 25ns
Mechanical characteristics
waterproof level IP65
Working conditions Temperature: -40 to 80,
Relative humidity: â?¤95ï¼?
Standards compliance IEC61643-1, RoHS

MPPT Solar Charge Controller
PC1800F Series (60/80/100A) (MPPT)

MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.

Features:
LCD display , easy to operate on LCD screen
Multi stage charging (3-stage charging , parallel charging and equalized charging function)
BTS Battery remote temperature sensor terminal
Enable to charge Li-thium, Gel , lead-acid battery
With RS485 & USB communication port
Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit

Brief Introduction
This solar flame light can be charged by the solar panel on it during the day time, turns on automatically at the dusk and turns off at the dawn. You can install them in four different ways: wall, hanging, lamp post and spike.

Features
1.Charged by solar panel and turn on automatically.
2.Eco-friendly and energy-saving.
3.4 different ways of installation.
4.1700K CCT to simulate the real flame.
5.Firm spike allow the torch insert to the ground stably.
6.Extra switch at the back for you to turn on or off as you like.

Brief Introduction
This solar flame light can be charged by the solar panel on it during the day time, turns on automatically at the dusk and turns off at the dawn.
Features
Charged by solar panel and turn on automatically.
Eco-friendly and energy-saving.
1700K CCT to simulate the real flame.
Firm spike allow the torch insert to the ground stably.
Extra switch at the back for you to turn on or off as you like.

Brief Introduction
This solar flame light can be charged by the solar panel on it during the day time, turns on automatically at the dusk and turns off at the dawn. You can install them in two different ways: hanging and spike.

Features
Charged by solar panel and turn on automatically.
Eco-friendly and energy-saving.
2 different ways of installation.
1700K CCT to simulate the real flame.
Firm spike allow the torch insert to the ground stably.
Extra switch at the back for you to turn on or off as you like.

Brief Introduction
This solar flame light can be charged by the solar panel on it during the day time, turns on automatically at the dusk and turns off at the dawn.

Features
1.Charged by solar panel and turn on automatically.
2.Eco-friendly and energy-saving.
3.1700K CCT to simulate the real flame.
4.Firm spike allow the torch insert to the ground stably.
5.Extra switch at the back for you to turn on or off as you like.

China Floating PV System Manufacturer Offers Floating Solar Photovoltaic Mounting Systems Custom Design, Environment Friendly, Sustainable, Easy To Install.

Material: HDPE Plastic.
Application: Generating Electricity.
Manufacturing Process: Blow Molding.
Design: Custom Design Including Project Design, Product Processing.
Place Of Origin: Fujian, China (Mainland).
Features: Low Cost, Environment Friendly, Easy To Install, High Productive, Above 25 Years Service Life.

Place of Origin:CN;ZHE
Type:Standard Solar Panel
Brand Name:Shinefar
Size:solar panel: 1640x992x35mm
Solar Panel Type:Grade A Polycrystalline
Work Time (h):2-6hours
Output Voltage (V):48V
Battery Type:Lead Acid
Controller Type:MPPT
power:5000w
Inverter Controller:5000w-50A/48V*1
Application:home
Battery:150AH/12V*4
Solar panels:320w/30V*4

Technical Indicators

Model MJLM-36-22-D
Effective Laminating Area 2200 m 3600mm
Overall dimension 17406mm (L) x3475mm (W) x2159mm (H)
Heating Mode Oil conductive heating
Compressed Air Pressure 0.6ï½?0.8MPa
Operation Vacuum Degree 100-40Pa
Evacuation Speed 70L/S
Precision of Temperature Control ±1.5
Operating Temperature Range Room Temperature--180 Temperature uniformity Effective Laminating Areaâ?¤±2
Height of Laminating Chamber 30mm
Evacuation Time Depending on the process, suggest: 5 ~ 8 min
Upper Cover moving range 300mm

The equipment can be used for the I-V test of various high efficient solar module (PERC, N, HIT, IBC) and MBB The pulse width is 200ms (10-200ms continuous adjustable). It can effectively overcome this kind of high efficiency battery capacitance response and ensure the accuracy of test data; also it can be used to ensure the accuracy of the test data. In order to test the conventional P type single and poly-crystalline solar modules, one machine is used as the first choice for the large laboratories, testing and certification institutions and high efficiency battery production enterprises. The same type of intelligent electronic load equipped with the same type of equipment has been applied in NIM.

10w,20w,30w,50w,75w,100w,120w,160w ect.

150w,200w,300w
ETFE film
easy to carry

two folds:65w,80w,100w
three folds:100w,120w,150w
four folds:130w,160w,200w
five folds:200w,250w
can custom make

two folds:100w,120w,160w,200w
three folds:150w,180w,240w,300w
four folds:200w,240w,320w,400w
can be all black, can custom make

Topsun main product is solar photovoltaic panel. Company manufacture solar panel ranges from 10wp to 260wp base on mono crystalline & multi crystalline high efficient solar cell.

1. High power module with precisely manufactured to achieve top most module conversion efficiency in the industries.

2. Ar coated cell surface to reduce the reflection of sunlight and bsf (back surface field) structure to improve cell conversion efficiency.

3. Due to use of high quality and iec certified raw materials from international reputed brands we assure our modules reliability, durability and consistency when exposed to real usage.

4. Rugged double-coated aluminum-alloy frame for longevity in adverse conditions.

5. Every batch of cells is individually inspected for optical & electrical parameters to ensure aesthetic appeal & consistent performance when the module is applied to an array.

6. Manufactured under iso 9001:2000 qms

Technology & structure
* mono / multi crystalline cells technology.
* laminated in eva.
* high transmission toughened glass as super state.
* anodized aluminum frames.
* terminal box with terminals.

Topsun solar home lighting system is appreciated for its high performance and compact structure. Incorporating the latest solar technology, our solar home lighting system harnesses the power of the sun to provide reliable, cost effective electricity wherever it is needed. This solar home lighting system supply electricity for lighting, entertainment and information to homes that are not connected to grids or where electric supply is quite erratic.

Features:
* 3 to 6 hours of operation under STC
* Easy to install and operate.
* Highly efficient electronics with PWM Charge Regulator.
* 6 V output plug - (Optional)
* Adequate protections for load and battery
* DC Fan (< 20W) , Portable TV, Tape Recorder can be used
* Available in customized and MNES approved models.

Application:
Domestic and commercial usage, shops, hospitals, farm houses, remote unelectrified village lighting, ashrams, ngo's education centers, health centers, schools, laboratories, outposts / check posts etc.

1000V DC TUV Solar PV Cable


Product Description


Simple on-site processing.

Acomodates PV cable with different insulation diameters.

Mating safety provided bykeyed housings.

Multiple plugging and unplugging cycles .

High current carrying capacity.

TUV and UL approved.

Original Manufacturer of Portable Power Generators,Solar Power Station,UPS Lighting Lithium Solar Power System., Solar Panel Battery Portable Emergency Power Station