Topsun main product is solar photovoltaic panel. Company manufacture solar panel ranges from 10wp to 260wp base on mono crystalline & multi crystalline high efficient solar cell. 1. High power module with precisely manufactured to achieve top most module conversion efficiency in the industries. 2. Ar coated cell surface to reduce the reflection of sunlight and bsf (back surface field) structure to improve cell conversion efficiency. 3. Due to use of high quality and iec certified raw materials from international reputed brands we assure our modules reliability, durability and consistency when exposed to real usage. 4. Rugged double-coated aluminum-alloy frame for longevity in adverse conditions. 5. Every batch of cells is individually inspected for optical & electrical parameters to ensure aesthetic appeal & consistent performance when the module is applied to an array. 6. Manufactured under iso 9001:2000 qms Technology & structure * mono / multi crystalline cells technology. * laminated in eva. * high transmission toughened glass as super state. * anodized aluminum frames. * terminal box with terminals.
Topsun solar home lighting system is appreciated for its high performance and compact structure. Incorporating the latest solar technology, our solar home lighting system harnesses the power of the sun to provide reliable, cost effective electricity wherever it is needed. This solar home lighting system supply electricity for lighting, entertainment and information to homes that are not connected to grids or where electric supply is quite erratic. Features: * 3 to 6 hours of operation under STC * Easy to install and operate. * Highly efficient electronics with PWM Charge Regulator. * 6 V output plug - (Optional) * Adequate protections for load and battery * DC Fan (< 20W) , Portable TV, Tape Recorder can be used * Available in customized and MNES approved models. Application: Domestic and commercial usage, shops, hospitals, farm houses, remote unelectrified village lighting, ashrams, ngo's education centers, health centers, schools, laboratories, outposts / check posts etc.
1000V DC TUV Solar PV Cable Product Description Simple on-site processing. Acomodates PV cable with different insulation diameters. Mating safety provided bykeyed housings. Multiple plugging and unplugging cycles . High current carrying capacity. TUV and UL approved.
Original Manufacturer of Portable Power Generators,Solar Power Station,UPS Lighting Lithium Solar Power System., Solar Panel Battery Portable Emergency Power Station
1. AC pure sine wave output 2. Solar charging and car charging directly 3. Small size, light weight, easy to carry 4.QC 3.0; Triple USB ports
Central System Collector Panel Tempered Prismatic Glass with Low Iron Oxide Aesthetic design and 100% sealing guarantee. Maximum thermal conductivity with ultrasonic welding technology stallation and installation in all roofs and constructions Tempered Prismatic Glass with Low Iron Oxide Aesthetic design and 100% sealing guarantee.
Helios 150-6 Solar Enrgy Panel Tempered Prismatic Glass with Low Iron Oxide Aesthetic design and 100% sealing guarantee. Maximum thermal conductivity with ultrasonic welding technology stallation and installation in all roofs and constructions Tempered Prismatic Glass with Low Iron Oxide Aesthetic design and 100% sealing guarantee.
Lighting Bus Tunking System : Schneider, C&S, Siemens, Legrand, Eaton, Alfaduct, Mandexi(Max), Godrej, Naxso, EAE Sandwich Bus Trunking System. Lighting Bus Tunking System :- Copper Range: 25A, 32A, 40A & 63A # Insulation : Class A # Enclosure : Aluminum #Impulse Withstand Voltage : 2.5KV #Degree Of Protection: IP55/IP54 # Operational Voltage 500 V AC # Frequency : 50HZ/ 60HZ. Electric # Saudi Arabia # Bangladesh # Mexico # Djibouti # Dubai # Electricals # Electric # Bangladesh # China.
PV 1000 Vdc 10x38mm PV fuses A range 10x38mm, 1000 Vdc PV fuses for the protection and isolation of photovoltaic strings that are specifically designed for use in PV systems with extreme ambient temperature, high cycling and low fault current conditions (reverse current, multi-array fault) string arrays. For application flexibility, the PV 10x38mm fuse is available as a cylindrical fuse as well as bolt-on, single and dual PCB tab and in-line crimp terminal versions. Ratings Volts 1000 Vdc Amps 1-20 A IR 50 kA Terminals and conductors Crimp connection for single, 75°C/90°C Cu Stranded 12-8 AWG PV wire Agency information UL Listed to 248-19, Guide JFGA, File E335324, IEC 60269-6 (gPV), CSA File 53787, Class 1422-30 (1-15A), 20 A Pending, CCC (1-20 A), RoHS Compliant Features Meets UL and IEC photovoltaic standards for global acceptance Low watts loss performance for energy efficiency Low temperature rise performance for more precise sizing In-line crimp terminal version is easy to apply in wire harness construction Typical applications Combiner boxes Inverters PV wire harnesses Recommended fuse blocks, holders and fuseclips BPVM modular fuse block with optional cover. CHPV 1- and 2-pole modular fuse holders with optional open fuse indication. 1A3400-09 PCB fuseclip. HPV in-line fuse holder assembly. PV-1A10F PV-2A10F PV-3A10F PV-3-5A10F PV-4A10F PV-5A10F PV-6A10F PV-8A10F PV-10A10F PV-12A10F PV-15A10F PV-20A10F PV-1A10-T PV-2A10-T PV-3A10-T PV-3-5A10-T PV-4A10-T PV-5A10-T PV-6A10-T PV-8A10-T PV-10A10-T PV-12A10-T PV-15A10-T PV-20A10-T PV-1A10-1P PV-2A10-1P PV-3A10-1P PV-3-5A10-1P PV-4A10-1P PV-5A10-1P PV-6A10-1P PV-8A10-1P PV-10A10-1P PV-12A10-1P PV-15A10-1P PV-20A10-1P PV-1A10-2P PV-2A10-2P PV-3A10-2P PV-3-5A10-2 PV-4A10-2P PV-5A10-2P PV-6A10-2P PV-8A10-2P PV-10A10-2P PV-12A10-2P PV-15A10-2P PV-20A10-2P PV-1A10F-CT PV-2A10F-CT PV31A10F-CT PV-3.5A10F-CT PV-4A10F-CT PV-5A10F-CT PV-6A10F-CT PV-8A10F-CT PV-10A10F-CT PV-12A10F-CT PV-15A10F-CT PV-20A10F-CT
Our company is a professional solar aluminum frame manufacturer with more than ten years experience. We have 12 production lines to produce solar aluminum frame profile. The whole production processes from the extrusion frame to the cutting frame are all completed by our company. We can produce about 1200 tons of aluminum profile and 30,0000 sets solar panel frame per month.The solar panel frame is made by using the international advanced sand blasting oxidation processs. Compared with the natural oxide film of aluminum alloy, its corrosion resistance, wear resistance and decoration are obviously improved.
PVS-R 600 Vac/dc Class RK5 PV fuse A range of UL 248-19 fastacting 600 Vdc Class RK5 fuses specifically designed to protect photovoltaic power systems in extreme ambient temperature, high cycling and low level fault current conditions (reverse current, multi-array fault). Ratings Volts 600 Vac to UL 248-12 600 Vdc to UL 248-19 Amps 20-400 A IR 200 kA RMS Sym. AC 20 kA DC (20-60 A) 10 kA DC (70-400 A) Agency information UL Listed, Std. 248-12, Class RK5, Guide JFGA, File E335324. Photovoltaic to UL 248-19, CSA Component Certified C22.2, CE Features Current limitation for non-inductive circuits provides Class RK5 current-limiting response to ground fault and short-circuit conditions Designed for the protection and isolation of photovoltaic systems Typical applications Photovoltaic systems Inverters Photovoltaic system DC safety switches Recombiner boxes PVS-R-20 PVS-R-25 PVS-R-30 PVS-R-35 PVS-R-40 PVS-R-50 PVS-R-60 PVS-R-70 PVS-R-80 PVS-R-90 PVS-R-100 PVS-R-110 PVS-R-125 PVS-R-150 PVS-R-175 PVS-R-200 PVS-R-225 PVS-R-250 PVS-R-300 PVS-R-350 PVS-R-400
Wuxi BODHI Electronic Equipment CO., Ltd is a leading filtration equipment provider founded in 2003. Its head-quarter is located in the garden city Wuxi, China and has a R&D facility in Detroit,USA. Our products have been distributed to more than 45 different countries such as Canada, France, Germany, Netherlands, Mexico and the United States. During the last decade, BODHI has developed more than 20 series of Mist Collectors and Dust Collectors, with approximately 200 different models. We also offer a wide range of filters to fit different user needs.BODHI not only follows all major quality standards like ISO, ASHRAE,OHSAS, but also develops over 100 patent technologies to meet these standards or above.
Solar Power Plant at Home not only reduces or eliminate electricity bill , but it also Offers a Long term saving (up to 25 Years). Apart from this It is Environment friendly as It helps combat greenhouse gas emissions and reduces our collective dependence on fossil fuel (Coal & Natural Gas). Solar panels are viewed as upgrades, like a renovated kitchen or a finished basement, so purchasing a solar energy system will likely increase the homes value. It means solar homes can sell for more than homes without Solar.
REFA model Solar Lighting System designed for walking trails, parks and gardens. Refa can function safely and properly either for standard night lighting or emergencies such as power cuts, disasters and earthquakes. Refa Solar lighting system can be easily installed off-grid without constructing grid connection which requires cabling and trenching System operates properly in extreme weather conditions, for example heat and dusty/sandy environments. Armature luminair between 1000-3750 lumen 3 m. 3.5 m, 4 m pole height options are available Turn on and turn off hours are adjusted to daylight. The automatic dimming feature increases lighting period when daylight is inadequate. User can connect to Bluetooth via mobile application and turn on/off the system and change dimming algorithm. Standard configuration has minimum 2 days of autonomy
SOLAR PANELS We deal in all leading Solar brands on wholesale rates including TATA, LUMINOUS, VIKRAM, JAKSON, ADANI, WAAREE , CANADIAN. Range : starting from 10 W to 335 W
SOLAR INVERTER We deal in all type of Solar Inverters of leading brands on wholesale rates (ABB , Luminous , Delta , Sukam , Microtek , Exide). Range : Single phase Inverters: 1 KW , 2 KW , 3 KW and 5 KW. Three phase Inverters: 6 KW, 10 KW, 12 KW, 15 KW, 20 KW, 30 KW & 50 KW
Standard: Conformed to IEC 60269-6 GB/T13539-6 UL4268-18 UL4248-18 Characteristics: Rated voltage:1000Vdc 33ka Rated current:30A UL 32A IEC Applied size:10*38 Temperature range:-30?-+120? Features: 1:Imported engineering plastics,better features of antiflaming,high and low temperature; 2:The metal piece made of pure copper silver plated,and one-shot stamping molding,with lower resistance(=9mO,20?) 3:To ensure tightly contact with the melting core,it's made of strong spring material with higher clamping strength ; 4:Non-slip design for the screws,more reliable connection performance has been greatly enforced; 5:Using multiple locks to eliminate false switching,making absolutely safe protection; 6:Label slot has been added,making more convenient marking; 7:Multipolar connection is allowed(accessory can be chosen),it's convenient to make selection; 8:Design of finger safe; 9:Ergonomic shape and make you feel better.
Solar Cell Manufacturing Plant in excellent condition Equipment overview Photovoltaic cell manufacturing equipment Single crystal type, cell size 156.3 �? 156.3 (M Manufacturing capacity 80 MW / year Elapsed years after facility introduction January 2011 mass production operation 2. Equipment owned (attached with detailed list) (1) Production facility Cleaning device Damage layer etching apparatus Texture etching equipment Phosphor glass etching equipment: 2 units (There are 2 lines on No. 6 line) Oxide film removal equipment Diffusion furnace, thermal oxidation furnace: 10 units (6 units for diffusion, 4 units for thermal oxidation) Plasma CVD apparatus: Three (2 TB type, MCXS type, but no vacuum pump) Printing drying furnace: 3 units (2 units for electrode printing, 1 unit for dopant printing) Printing drying Firing furnace: 1 unit Printing machine: 6 units (2 electrode printing: 2 units, 1 electrode printing: 2 units, dopant printing: 1 unit) IV inspection machine: 3 units (1 unit for half cut, 1 unit for full size, 1 unit for remeasurement) Wafer distributor (with inspection device.Wafer thickness, dimensions, etc.) Various conveying devices (some control parts are taken, operation can not be guaranteed) Laminator: 4 (NPC made 2 units, Nisshinbo made 2 units) Plasma etching equipment (not subject to sale as it is sold to manufacturers) (2) Inspection machine, measuring instrument Sheet resistance measuring instrument: 2 units Reflectance measuring device: 2 units Ellipsometer: 2 units (3) Other equipment / jig Printing mask cleaning device: 1 unit Tube washer (quartz parts wash): 1 unit Jigs such as each carrier, quartz boat, stack jig CVD exhaust gas burn-off device
Mitsubishi solar cell manufacturing equipment.
Mitsubishi Solar Cell Manufacturing Equipment
