Kilimanjaro Enterprises offers high-quality silicon Photo Photovoltaic Modules: a clean, reliable and economical source of energy. Our Solar PV Modules range from 3 Wp to 230 Wp and features like:
i)High Quality, Multicrystalline cells.
ii)Strong Durability with aluminum alloy frame, tempered glass and water proof lamination.
iii)Quality Check of each cell and Testing of every Module, at all production stages.
The solar photovoltaic modules are composed of high quality mono- or multicrystalline cells. These cells are embedded in highly transparent EVA, covered by tempered glass and surrounded by a strong aluminum frame. This results in maximum protection against hostile environments and prepares the modules for outside installations.
Solar Home Lighting System is a revolutionary product developed for use wherever the grid electricity is unavailable or unreliable. Using the highest quality and most efficient components, each Light provides exceptional brightness for at least 6--9 hours per day charged by sunlight.
This device is pretty much easy to install and is flexible enough to be installed and uninstall whenever needed. Portable because you can bring it anywhere, in case you transfer to another house, you can bring it with you. Using this in your homes could cut down your high--electricity bills because light bulbs are the number one in energy consumption.
Features
Low energy dissipation
Low cost with high quality
LED exceptional brightness
AnyTime & AnyWhere Lighting
Energy saving & Environment friendly
Very easy to be installed & uninstalled
Automatic overload & overcharge protection.
Applications
Home lighting
Emergency lighting
Desert area, grassland area
Remote hilly and mountainous locations
Village, country area and islands.
Model: FH-SL-5
Specification:
Solar Panel: 18V5W with 6m cable
Dimension: 285mm*185mm*25mm
Sealed lead Acid Battery: 12V4Ah
LED lamp: 2pcs LED Lamp 12V3W with 5m cable
Automatic overload protection & over charge protection.
With USB Output to charge mobile phones,mp3,mp4 etc. with different connector trips.
Charging time: About 9-10 hours to charge the battery fully
Lighting time: About 6-7 hours after the battery is fully charged, about 3-4 hours after the battery is charged for one day.
Back up mechanism for rainy day
Control charger to prolong battery life
Distributed light with no single point of failure
No scheduledmaintaince upto 5 years
1. Charging for mobile phoneíó digital cameraíó DVíó IPodíó MP3\MP4íó PDAíó GPSí¡
2. Modeling elegant and fashionable
3. Double solar panels output current can reach: 380mA
4. With the function of strong light flashlight
5. Adjustable output voltage, 5.5V&6V
6. Color: black rubber paint with aluminium wire
7. Size: 13.8í-7.8í-2.2CM
8. WT: 209g.
50 PCS/ctn WT per unit: 0.44KG G.W.: 22.89KG N.W.: 22.07KG Size of carton: 57.5í-38.3í-35CM
The 1kWp PV stand alone system supplies power for private residences and is made up of the solar module, controller, inverter, storage battery and bracket.
Basic Usage: Throughout the day the solar module generates DC electricity from the sun and stores this energy in the battery. The inverter then transforms the DC electricity into AC electricity in order to power the private residence. The AC electricity is generated from the controller and inverter.
Model : CSESM-100D
Parameters : Standard
Open Circuit Voltage Voc (V) : 21.6
Optimum Power Voltage Vmp (V) : 17.2
Short Circuit Current lsc (A) : 6.49
Optimum Operating Current lmp (A) : 5.81
Maximum Power Up (w) : 100
Dimension Of Module : 670í-1250í-40mm
Weight : 12.0KG
Solar panel:10-40w,12V(Option)
Solar controller: PWM mode, 12v, 5amps, built-in
Battery: lead acid battery, 12v/17AH,33AH,(Option)
Battery box: ABS plastic
Lights: DC energy saving lights with cables and plugs
1. The cap is made with powder-coated 6063 aluminum, which brings up smooth surface, portable structure and heat-resistance.
2. Lampshade is made of toughened glass, which assures good transparency and intensity.
3. It can be customized to different power capability, luminance and light angle.
4. safe, energy-saving and environment-friendly:
The lamp cap decreases wind resistance and lamppostí»s burden because its light and thin, besides the cap avoids traditional lampí»s smash problem because it is resistant to shock, anti-seismic well and have no filament or glass shell.
To reach the same illumination, LED lamp saves 60% energy compared with sodium one.
The cap excludes pollutive elements: plumbum, mercury.
5. technical data:
Power: 15W ¿C 35W
Power Factor: 0.9-1
Luminous Efficiency: >100lm/w
Light Attenuation: <3%(3000 hours)
Color Temperature: 6500-7000K, cool white
Color Rendering Index: Ra>85
Illumination Angle: 140 degree (can be customized different angles)
Work Life: >50000 hours
Material for Light Body and Shade: Aluminum Alloy & resin
Protection Grade: IP65 .
Size: 73.5cm*36cm*19cm
Weight: 4.44kg
individually packed in carton.
Js-solarroof has been developed as a universal pv module mounting system for pitched roof and flat roof installation.The innovative and patented aluminum base rails, the z module and the rail extension technology eliminate the need for onsite cutting and enable quick and easy field pv module installation.In order to be applied on the different roof, we specially design the different hook for easy and quick installation of rail on the roof;such as stainless stell hook for tile roof, l-foot for metal roof, and pitched support angle for flat roof, and so on.
Easy installation
Diversified application
Universal compatibility
Choice quality
30-year guarantee
Maximum lifespan
100% recyclable, enviroment friendly
íntechnical specifications
Installation site Pitched roof or flat roof
Roof cladding Suitble for most type of cladding
Roof slop Up to 60íµ
Building height Up to 20m
Wind load 60m/s
Snow load 1.4kn/m¬˜
Pv modules Framed
Modules orientation Vertical or horizontal
Module width Any
Certification Tuv & iso 9001:2008 and other international standards
Support rail Extruded aluminum
Color Natural
Warranty 30 years durability on material
Js-solarroof II mounting system is applicable for fixation of thin film solar panel, which fixed by double layer rail, is more saft and stable for whole system.For protecting thin film solar panel, mounting system applies the hight-performance of anti-uv epdm rubber, each solar penal can be regarded as independent system and cannot impair any other solar panels to function at work.
Easy installation
Diversified application
Universal compatibility
Choice quality
30-year guarantee
Maximum lifespan
Double layer rail
100% recyclable, enviroment friendly
Technical specifications
Installation site Pitched roof or flat roof
Roof cladding Suitble for most type of cladding
Roof slop Up to 60íµ
Building height Up to 20m
Wind load 60m/s
Snow load 1.4kn/m¬˜
Pv modules Framed
Modules orientation Vertical or horizontal
Module width Any
Certification Tuv & iso 9001:2008 and other international standards
Support rail Extruded aluminum
Color Natural
Warranty 30 years durability on material
Js solar ground system has been developed as a universal framed pv module mounting system for open space ground installations. The innovative and patented alumimum base rails, the z modules and pipe cap enables to meet the practical requirement of each kind of field installation by connecting several units together easy and quickly.It used for installation of frame solar panel, frameless solar panel and large-scale power station with cheap cost, quick installation, stable ability and strong resistance of wind.
Easy installation
Diversified application
Universal compatibility
Choice quality
30-year guarantee
Maximum lifespan
100% recyclable, enviroment friendly
íntechnical specifications
Installation site Open space ground
Module slop According to the practical demend
Height According to the practical demend
Wind load 60m/s
Snow load 1.4kn/m¬˜
Pv modules Framed or frameless
Modules orientation Vertical or horizontal
Module width Any
Certification Tuv & iso 9001:2008 and other international standards
Support rail Extruded aluminum
Color Natural
Warranty 30 years durability on material
Ws-c2415 6a 10a 15a solar charge controller
The wellsee solar charge controller (wellsee pv controller, battery controller, solar regulator) applies in solar photovoltaic systems, which coordinates the working of solar panels, batteries and loads. It adds some protection functions, so that the entire system can be in efficient and safe operation.
Ws-c series charge controllers apply to all types of photoelectric panels and various types of batteries, mcu (micro-processing controller) has pmw (pulse modulation wide-frequency) 0~100% variable duty cycle process. According to the types and actual charging situation of the battery, ws-c controller series can provide the fast and best charging voltage and electricity from the pv panel. C30 and c60 series are equipped with advanced man-machine interactive function, so the user can adjust the charging voltage.
Functions:
1. Applying with various types of batteries
2. Automatic recognition of input voltage
3. Micro processing controller pulse modulation wide-frequencypwmcharge
4. Temperature sensor for charging a battery in compensation
5. Overload protection (automatic comeback)
6. Overcharge protection
7. The temperature compensate
8. Short circuit protection (automatic comeback)
9. Thunder protection
10. Reverse discharge protection
11. Converse polarity connection protection (automatic comeback)
12. Low voltage protection
Model Ws-c2415 6a Ws-c2415 10a Ws-c2415 15a
Rated voltage 12v/24v automatic voltage recognition
Max load current 6a 10a 15a
Input current range 12v-17v/24v-34v
Lengthín1m
Charge loop drop 0.25v
Lengthín1m
Discharge loop drop 0.05v
Over voltage protection 17v/34v
Full charge cut 13.7v/27.4v
Low voltage cut 10.5~11v/21v~22v
Temperature compensation -3mv/ípc/cell
No load loss ín10ma
Max wire area 2.5mm2
Ambient temperature -25----+55 ípc
Ws-c2415
Certification ce rohs iso9001
Size 134*100*31 mm
Weight 500g
Portable convenient mini power bank to power any dc 12v/ dc 5v applications
Weather proof mono/poly crystalline solar modules
Microcontroller based solar charge controller
Reverse polarity protection
Short circuit protection
Over load/ over charge/ over discharge protection
Over temperature protection
Limiting voltage warning protection
Constant voltage regulator
Expandable up to 50 ah battery with 80 w pv
Well suited for regions with shortage of electricity
9710 Solar Power Equipments Suppliers
Short on time? Let Solar Power Equipments sellers contact you.
