Install site: all types of soil Standard: gb50021-2001 Gb50007-2002 Gb50011-2001 Anticorrosive: hot dip galvanized Warranty: ten years warranty Duration more than 20 years. Pipe material: q235b Pipe diameters: 50~140mm Pipe length: 1000~2000mm Pipe thickness: 2~4mm.
This ARKA power generator collects and stores solar energy in the battery and generates pure sine wave 220v ac output to power domestic electric appliance and fittings. It has a inbuilt proprietary microprocessor based dual solar-grid charge controller with unique and advanced intelligence logic to select either solar power as priority or ac mains to power up the loads without interruption. It has distinctive battery management system with advanced protections to make it one of the most rugged solar electric power generating system available. 10 nos, 25 kgs.
-- maximum power (pm) :5w -- operating voltage (vmp):18v -- operating current (imp) :277ma -- open circuit voltage (voc) :21.6v -- short circuit current (isc) : 310ma -- dimension:290x180x18mm -- type:monocrystalline silicon solar cell -- frame: silver anodized aluminum -- item no:ks-m5w -- weight:0.8kg/pcs -- solar module for 12v charging -- standard test conditions(stc): Am1.5, irradiance:1000w/square meters, module temperature:25 degrees centigrade. Standard.
-- Maximum Power (Pm) :3W -- Operating Voltage (Vmp):18V -- Operating Current (Imp) :166mA -- Open Circuit Voltage (Voc) :21.6V -- Short Circuit Current (Isc) :181mA -- Dimension:215X135X18mm -- Type:Monocrystalline silicon solar cell -- Frame: Silver anodized aluminum -- Item No:KS-M3W -- Weight:0.6Kg/PCS -- STANDARD TEST CONDITIONS(STC): AM1.5, Irradiance:1000W/square meters, Module temperature:25 degrees centigrade. Standard.
-- item no. KS-M165165GB -- maximum power (pm) :3.6w -- operating voltage (vmp):6v -- operating current (imp) : 600ma -- power tolerance:-5% to +5% -- dimension:165x165x4.5mm -- type:monocrystalline silicon solar cell -- sealed tech: tempered glass lamination, black panel -- standard test conditions(stc): Am1.5, irradiance:1000w/square meters, module temperature:25 degrees centigrade. Standard.
-- Item No. KS-M305225G -- Maximum Power (Pm) :10W -- Operating Voltage (Vmp):18V -- Operating Current (Imp) :555mA -- Power Tolerance:-5% to +5% -- Solar Cell: Monocrystalline silicon solar cell -- Dimension:305X225X4.5mm -- Encapsulation Methods: PV Tempered glass, black film, No frame -- STANDARD TEST CONDITIONS(STC): AM1.5, Irradiance:1000W/square meters, Module temperature:25 degrees centigrade. -- Warranty: nominal power keep more than 90% in 10 years. -- Charger for 12V battery. Standard.
6 inch Poly-crystalline Solar Panel, 260W - 290W Series number: TM260P-72 - TM290P-72 Manufacturer: TM Solar Power Co.,Ltd. Jiangyin City, China High cell efficiency PV solar panel with quality silicon material for long term output stability and reliability. Rigorous quality control to meet the highest international standards. High transmittance, low iron tempered glass with enhanced stiffness and impact resistance. Unique frame design with high mechanical strength for easy installation. Advanced encapsulation material with multilayer sheet lamination to provide long-life and enhanced cell performance. Outstanding electrical performance under high temperature and low irradiance conditions. 72 Back-Contact polycrystalline Si solar cells (approx. 20%). Applications: Commercial/ industrial building PV solar roof-top off-grid systems. Residential PV solar roof-top off-grid systems. Any commercial / industrial ground mount off-grid systems. Other off-grid industrial and commercial solar PV applications. Warranty: 1. Seller should adopt best materials and workmanship to manufacture and supply the above stated commodities to Buyer, 100% checked and TUV,VDE,UL,MCS standards compliant 2. 10 years warranty for not less 90% rated power output, and 25 years for not less 80% output 3. 100% Dielectrical safety test and checking 4. 10 year workmanship warranty, would be enclosed with the supplied products Certifications TUV SUD (IEC61215 IEC61730) CQC MCS CEC Electrical Characteristics: All specified Parameters are at STC 25 Centigrade Ambient, 1000W/ m irradiance and AM 1.5 Type TM260P-72 TM265P-72 TM270P-72 TM275P-72 TM280P-72 Max-Power Pm(W) 260 265 270 275 280 Module-Power Range(W) 265>Pm 260 270>Pm 265 275>Pm 270 280>Pm 275 Pm 280 Power Tolerance(W) +0~+5 +0~+5 +0~+5 +0~+5 +0~+5 Max-Power Voltage(V) 35.6 35.8 36.1 36.37 36.6 Max-Power Current lm(A) 7.3 7.4 7.48 7.56 7.66 Short-Ciruit Current lsc(A) 8.05 8.1 8.2 8.2 8.26 Open-Circuit Voltage Voc(V) 43.5 43.5 43.6 44 44.2 Max-System Voltage(VDC) 1000V(IEC) Cell Efficiency(%) 14.8 15.1 15.4 15.7 16 Module Efficiency(%) 13.4 13.7 13.9 14.2 14.4 Max.Series Fuse(A) 15 Pm Temperature Coefficients(W/C) -1.1041 Lsc Temperature Coefficients(A/C) 0.00418 Voc Lsc Temperature Coefficients(V/C) -0.1261 NPCT Nominal Operating Cell Temperature 47 2 centigrade Mechanical Characteristics: Cable type,Diameter and Length 4mm,TUV certified,1250mm Type of Connector Compatible Type IV Number,type and arrangement of cells 72 pcs, Poly-Crystalline Silicon(6, 12) Cell Size(mm) 156, 156(D200) Dimension(mm) 1956, 992, 45 Weight(kg) 26 No.of Draining Holes in Frame 10 Glass,Type and Thickness High Transmission,Low lron,Tempered Glass 4.0mm Packaging Configuration: Packing Configuration 22 pcs/box Quantity/Pallet 44 pcs/pallet Loading Capacity 528 pcs/40ft Container Absolute Ratings: Dielectric Insulation Voltage 3000V Operating Temperature(centigrade) -40 - +85 Storage Temperature(centigrade) -40 - +85. Consolidated hardboard carton, wrap film, with wooden pallet.
Series number: TM156PC Dimension: 156 x 156 +/-0.5mm Thickness: Final cell: 210m+/-40m Silicon: 200m+/-30m Front side(-) Blue SiN anti-reflection coating Two 1.6mm wide silver bus bars Back side(+) Full aluminum back-surface field 3 mm wide silver soldering pads Features and quality control: 1. High efficiency solar cells with anisotropic etched surface; 2. Low reverse current, high shunting resistance and reliability; 3. Proper handling from incoming inspection through production, outgoing inspection and packaging; 4. 100% checked for reverse current and visual appearance; 5. Small light-induced degradation; 6. Calibration by Fraunhofer ISE. 6 inch Poly Effi Pmpp Vmpp Impp Voc Isc % W V A V A S3 17.50 4.258 0.526 8.108 0.622 8.563 S2 17.25 4.198 0.524 7.992 0.62 8.458 S1 17.00 4.137 0.524 7.876 0.619 8.353 C4 16.75 4.076 0.522 7.81 0.617 8.286 C3 16.50 4.015 0.518 7.746 0.613 8.215 C2 16.25 3.955 0.515 7.683 0.61 8.144 C1 16.00 3.894 0.512 7.613 0.608 8.075 R4 15.75 3.833 0.51 7.534 0.605 8.058 R3 15.50 3.772 0.508 7.453 0.604 8.02 R2 15.25 3.711 0.505 7.35 0.604 7.997 R1 15.00 3.65 0.503 7.271 0.604 7.989. Dimension: 156 x 156 , 0.5mm Thickness: Final cell: 210 m, 40 m Silicon: 200 m, 30 m.
Series number:TM075M-36 - TM090M-36 Manufacturer:TM Solar Power Co.,Ltd. Jiangyin City, China High cell efficiency PV solar panel with quality silicon material for long term output stability and reliability. Rigorous quality control to meet the highest international standards. High transmittance, low iron tempered glass with enhanced stiffness and impact resistance. Unique frame design with high mechanical strength for easy installation. Advanced encapsulation material with multilayer sheet lamination to provide long-life and enhanced cell performance. Outstanding electrical performance under high temperature and low irradiance conditions. 36 Back-Contact monocrystalline Si solar cells (approx. 20%). Applications: Commercial/ industrial building PV solar roof-top off-grid systems. Residential PV solar roof-top off-grid systems. Any commercial / industrial ground mount off-grid systems. Other off-grid industrial and commercial solar PV applications. Warranty: 1. Seller should adopt best materials and workmanship to manufacture and supply the above stated commodities to Buyer, 100% checked and TUV,VDE,UL,MCS standards compliant 2. 10 years warranty for not less 90% rated power output, and 25 years for not less 80% output 3. 100% Dielectrical safety test and checking 4. 10 year workmanship warranty, would be enclosed with the supplied products. Certifications: TUV SUD£¨IEC61215 IEC61730 CQC MCS Electrical Characteristics: All specified Parameters are at STC 25 Ambient, 1000W/ m irradiance and AM 1.5 Type TM075M-36 TM080 M-36 TM085 M-36 TM090 M-36 Max-Power Pm(W) 75 80 85 90 Module-Power Range(W) 80>Pm 75 85>Pm 80 90>Pm 85 Pm 90 Power Tolerance(W) +0~+5 +0~+5 +0~+5 +0~+5 Max-Power Voltage(V) 17.8 18.2 18.5 18.5 Max-Power Current lm(A) 4.22 4.4 4.59 4.86 Short-Ciruit Current lsc(A) 4.72 4.89 5.14 5.3 Open-Circuit Voltage Voc(V) 21.6 22.1 22.2 22.4 Max-System Voltage(VDC) 715V(IEC) Cell Efficiency(%) 14.0/13.5 15/14.4 15./15.2 16.8/16.1 Module Efficiency(%) 11.6 12.4 13.1 13.9 Max.Series Fuse(A) 10 Pm Temperature Coefficients(W/centigrade) -0.9964 Lsc Temperature Coefficients(A/ centigrade) 0.0023 Voc Lsc Temperature Coefficients(V/ centigrade) -0.1801 NPCT Nominal Operating Cell Temperature 47¡À2 centigrades Mechanical Characteristics Cable type,Diameter and Length 4mm,TUV certified,1000mm Type of Connector Compatible Type IV Number,type and arrangement of cells 36 pcs, Mono-Crystalline Silicon(4, 9) Cell Size(mm) 156, 156(D200) Dimension(mm) 1482, 676, 40 Weight(kg) 12 No.of Draining Holes in Frame 10 Glass,Type and Thickness High Transmission,Low lron,Tempered Glass 3.2mm Packaging Configuration: Packing Configuration 24 pcs/box or 2 pcs/box Quantity/Pallet 56pcs/pallet Loading Capacity 840pcs/40ft Absolute Ratings: Dielectric Insulation Voltage 3000V Operating Temperature(centigrade) -40 - +85 Storage Temperature(centigrade) -40 - +85. Cell size: 125 x 125mm (D: 150/165mm), Cell array: 4 9, 36pcs / panel, Dimension: 1195 x 541 x 30mm, Gross weight: 8 kgs / panel, Draining holes at frame: 10.
Series number: TM170M-72 - TM190M-72 High cell efficiency PV solar panel with quality silicon material for long term output stability and reliability. Rigorous quality control to meet the highest international standards. High transmittance, low iron tempered glass with enhanced stiffness and impact resistance. Unique frame design with high mechanical strength for easy installation. Advanced encapsulation material with multilayer sheet lamination to provide long-life and enhanced cell performance. Outstanding electrical performance under high temperature and low irradiance conditions. 72 Back-Contact monocrystalline Si solar cells (approx. 20%). Applications: Commercial/ industrial building PV solar roof-top off-grid systems. Residential PV solar roof-top off-grid systems. Any commercial / industrial ground mount off-grid systems. Other off-grid industrial and commercial solar PV applications. Warranty: 1. Seller should adopt best materials and workmanship to manufacture and supply the above stated commodities to Buyer, 100% checked and TUV,VDE,UL,MCS standards compliant 2. 10 years warranty for not less 90% rated power output, and 25 years for not less 80% output 3. 100% Dielectrical safety test and checking 4. 10 year workmanship warranty, would be enclosed with the supplied products. Certifications: TUV SUD IEC61215 IEC61730 CQC CE Mechanical Characteristics All specified Parameters are at STC 25 Ambient, 1000W/ m irradiance and AM 1.5 Certificates TUV(Lec 61215&SecurityClass ),VDE(lEC 61215&lEC 61730),UL1703 3rd Ed,CE Cell(mm) 125, 125 Dimension 1580, 808, 40 No of Cells 6, 12 / 72 Weight(kg) 15.5 Cable type,Diameter and Length 4mm,TUV certified,1000mm Type of Connector Compatible Type Junction box IP65 No.of Draining Holes in Frme 10 Glass,Type and Thickness High Transmission, Low lron, Tempered Glass 3.2mm Bypass-Diods 3 Electrical Characteristics: Type TM170M-72 TM175M-72 TM180M-72 TM185M-72 TM190M-72 Max-Syetem Voltage(V) 600V(UL)/1000V(lEC) Maxim um Power at STC Pmax(W) 170 175 180 185 190 Optim um Operating Voltage Vmp(V) 35.2 35.3 36 36.27 36.5 Optim um Operating Current lmp(A) 4.83 4.96 5 5.1 5.2 Open-Circuit Voltage Voc(V) 43.8 44.2 44.8 45 45.2 Short-Ciruit Currentlsc(A) 5.14 5.2 5.3 5.5 5.6 Cell Efficiency(%) 15.9/15.2 16.4/15.7 16.8/16.1 17.3/16.6 17.8/17.0 Module Efficiency(%) 13.3 13.7 14.1 14.5 14.88 Maximum Reverse Current Do not apply external Voltage larger than Voc to the modules Packaging Configuration: Packing Configuration Quantity/Pallet Loading 2 pcs/box or 24 pcs/box 50 pcs/pallet 700 pcs/40ft Container Absolute Ratings: Dielectric Insulation Voltage 3000V Operating Temperature(centigrade) -40 - +85 Storage Temperature(centigrade) -40 - +85. Consolidated hardboard carton, wrap film, wooden pallet.
Series number: TM156MC Dimension: 156 x 156 +/-0.5mm Diagonal 150 +/- 1mm Thickness: Final cell: 210m+/-40m Silicon: 200m+/-30m Front side(-) Blue SiN anti-reflection coating Two 1.9mm wide silver bus bars Back side(+) Full aluminum back-surface field 3 mm wide silver soldering pads Features and quality control: 1. High efficiency solar cells with anisotropic etched surface; 2. Low reverse current, high shunting resistance and reliability; 3. Proper handling from incoming inspection through production, outgoing inspection and packaging; 4. 100% checked for reverse current and visual appearance; 5. Small light-induced degradation; 6. Calibration by Fraunhofer ISE. 6 inch Mono Effi Pmpp Vmpp Impp Voc Isc % W V A V A U5 18.50 4.42 0.534 8.219 0.636 8.711 U4 18.35 4.384 0.532 8.213 0.636 8.709 U3 18.25 4.361 0.531 8.211 0.634 8.699 U2 18.00 4.301 0.528 8.203 0.634 8.678 S4 17.75 4.241 0.517 8.202 0.629 8.656 S3 17.50 4.182 0.513 8.198 0.629 8.632 S2 17.25 4.122 0.508 8.109 0.627 8.628 S1 17.00 4.062 0.507 8.007 0.626 8.601 C4 16.75 4.002 0.505 7.932 0.625 8.59 C3 16.50 3.943 0.503 7.849 0.625 8.569 C2 16.25 3.883 0.501 7.742 0.623 8.527. Consolidated hardboard carton, wrap film, with wooden pallet.
- solar panels - 3 wp to 75 wp. - solar home lighting -3wp to 37wp. - solar street ligthing-11wp to 74wp - solar power projects- 9kw to 54 kw - solar luminaries, LEDs, lalterns etc.
1. Solar Panel : 5.5V/300mA, FMonocrystalline Silicon 2. Input Power : AC100V--240V 3. Output voltage : 4.8V 5, D8V, B8, D4V, B9.0V 4. Maximum current output : DC460-800mA 5. Li-Battery capacity : 4200mAH Accessories list: 1. AC Adapter 1/PCS, 1000 2. USB DC Input charge cable 1/PCS, BMini USB output cable with 5P 1/PCS, BMini USB output cable 1/PCS 3. Adaptor: 10PCS(For IPhone/Blackmerry/ KUMA/MOTO/HTC/Nokia/etc). Carton/wooden box.
I deal with solar panels batteries invarters regulators bulbs wires and anything associates with solar energy. All kinds, but nomally solar panels dont have much weight.
Item No Description of Each Component Quantity JA-M100W-12 Solar Modules 100w 17.2V 5.81A Polycrystalline (Mono crystalline ) 50pcs JA-110Amp Solar Charger Controller 48V 110Amps 1pc JA-6000W Solar Inverter Pure Sine Wave 48V 6000W 1pc JA200-12 Deep Cycle Battery Maintenance-free 12V 200AH 30pcs Cable,Connector 1set Mounting 1set .
Solar Panel: mono/polycrystalline 1pc 5W(10W~20W optional); Battery: VRLA 12V/7A 1pcs; Controller: Solar control circuit 1pcs; Output: DC 12V/10A 1pcs USB 5V/500mA 1pcs; AC Charge: 16V/3A 1pcs Introductions: Portable solar power system consists of solar modules, controllers, solar batteries. The product is designed specifically for home DC application, It can be used for all DC items, and it is the ideal charger for most electronic products. The advantages of portable solar power systems is its low cost, compact and beautiful design, easy to carry, OEM and ODM inquiries are welcome and acceptable. The portable solar power systems are suitable for the places where are far away from grid-power and the ocasions such as camping, hunting, picnic, travel in wild and so on. Size: Solar panel:19*30*1.8CM Control Box:23*12.5*11CM Specifications: OEM and ODM are available Components/Model PSP20 5W-20W: PSP30 30W PSP40 40W Solar Panel: mono/polycrystalline 1pc 5W(10W~20W optional) mono/polycrystalline 15W*2pcs mono/polycrystalline 20W* 2pcs Battery VRLA 12V/7AH 1pc VRLA 12V/12AH * 3pcs VRLA 12V/12AH * 4pcs Controller Solar control circuit 1pc 12V/10A* 1PC 12V/10A* 1PC Invertor - 150W* 1pc 150W* 1pc Output DC 12V/10A 1pc USB 5V/500mA 1pc AC 100~220V 1pc DC 12V/10A 2PCS AC 100~220V 1pc DC 12V/10A 2PCS AC Charge 16V/3A 1pc AC86V~260V 15V/5A 1pc AC86V~260V 15V/5A 1pc Size Solar panel:19*30*1.8CM Control Box:23*12.5*11CM 1PC/Carton£ºL55*W38*H27CM 1PC/Carton£ºL73*W38*H27CM Weight:4.5kgs
Solar LED street light, solar home light, solar lanterns. 4 pcs in 1 pack, 12 k.G.
190Watt Nano Coating Solar Panel, 190W Mono Crystalline Solar Panel 190Watt Nano Coating Solar Panel feature: Products Name: Hydrophobic and self-cleaning Solar PV Panel Maintenance Free Solar PV Panel Frost resistant Solar PV Panel Salty Air resistant Solar PV Panel Nano Panel brings you Much More Power Output, Much Less Maintenance, Much Longer Lifespan! Nano Coating Solar PV Panel improves efficiency in three ways: Anti-wetting, Dirt reduction and Reduced light reflection. Anti-wetting and self-cleaning glass properties improve PV efficiency in inclement weather. More than 8 % power shall be produced compared with traditional solar PV Panel without nano coating. Nano Coating Solar PV Panel prevents dirt, algae and bird fouling from adhering to glass, Dust and dirt are washed away with rainwater, The panel reduces cleaning frequency saving energy, time and cost. Dirt removal and salty Air resistant properties drastically increases the Life Span of Solar PV Panel 190Watt Solar Panel ELECTRIC CHARACTERISTICS (STC*) Model no RN190M-125 Nominal Output(Pmax) 190 Optimum Operating Voltage(Vmp) 36.5 Optimum Operating Current(Imp) 5.21 Open Circuit Voltage(Voc) 44.5 Short Circuit Current(Isc) 5.52 Operating Temperature -40¡ÆC ¡ +90¡ÆC Maximum System Voltage 1000V DC Maximum Series Fuse Rating 15A Power Tolerance 0-+5W STC* (Standard Test Conditions): Irradiance 1000W/m©÷, Module Temperature 25¡ÆC, Air Mass 1.5 190Watt Solar Panel TEMPERATURE CHARACTERISTICS NOCT 48¡¾2¡ÆC Temperature Coefficient of Pmpp -0.43%/¡ÆC Temperature Coefficient of Voc -0.33%/¡ÆC Temperature Coefficient of Isc 0.04%/¡ÆC Note*: Nominal Operation Cell Temperature Sun 1000W/m©÷,Air 25¡ÆC,Wind speed 1m/s 190Watt Solar Panel Mechanical Data Cell Type Mono-crystalline Cell Arrangement 72(6¡¿12) Mono-crystalline cells 125mm Dimensions 1580 x 808 x 35 mm Weight 15.5Kg Front Cover 3.2mm thick, low iron tempered glass Frame Material Anodized aluminum alloy Warranty 90% power output over 10 years 80% power output over 25 years Free from defects in materials and workmanship for 12 years. Dimensions 1580 x 808 x 35 mm Weight 15.5Kg 26 pcs/ Pallet 728 pcs/ 40HQ FCL.
1.Solar panels use the high efficient crystalline silicon and strictly according to the international standard operating procedure, high conversion efficiency, durabel. 2.Meet the various dc & ac electrical appliances' demand, such as tv, fan, radio, computer etc. 3.Fashion modeling, easy operation, environmental and healthy, blending in a variety of fashion intelligent household, in case of power outages. 4.Meet the remote areas basic living power requirement, suitable for field operation , isolated islands life, villa, power failure emergency situation, and all sorts of natural disaster lighting.
Item No. YDM-230W(P) Cell Type Polycrystalline 156x156 Cell No. (Pcs) 60£¨10x6£© Panel dimension (mm) 1640x990x45 Maximum Power (W) 230.00 Maximum Power Volts (V) 30.48 Maximum Power Current (A) 7.54 Open Circuit Volts (V) 37.17 Short Circuit Current (A) 8.31 Junction Box Type MC4 Weight (KG) 19.3 Output telerance ¡À3% Frame (Material,etc.) Anodized Aluminum Packing 2pcs/carton Test standars:Irradiance AM1.5 1000W/©O 25¡æ Warranty 90% for 10 years, 80% for 25 years. Size:1640x990x45mm Weight:19.3kg.
