Photovoltaic lightning protection combiner box Model: SDDL-6-1 APPLICATIONS: Large-scale photovoltaic grid-connected power generation system To reduce the wiring between photovoltaic modules and the inverter Improve reliability FEATURES: Reasonably simplify wiring, beautiful and generous Meets outdoor installation requirements Wide DC voltage input range Use photovoltaic special fuse Using special photovoltaic high voltage lightning arrester Convenient and fast maintenance Can be customized according to customer needs, optional TECHNICAL PARAMETER� Model SDDL-6-1 Photovoltaic parameters Nominal working voltageUn 1000V DC Single input short circuit current 10A Number of input ports 6 Number of input ports 1 Lightning protection parameters Nominal discharge current�8/20μs� 20KA Maximum flow capacity�8/20μs� 40KA Protection level�8/20μs� �3000V Response time Ta 25ns Mechanical characteristics waterproof level IP65 Working conditions Temperature: -40 to 80, Relative humidity: �95� Standards compliance IEC61643-1, RoHS
MPPT Solar Charge Controller PC1800F Series (60/80/100A) (MPPT) MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. Features: LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS Battery remote temperature sensor terminal Enable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Brief Introduction This solar flame light can be charged by the solar panel on it during the day time, turns on automatically at the dusk and turns off at the dawn. You can install them in four different ways: wall, hanging, lamp post and spike. Features 1.Charged by solar panel and turn on automatically. 2.Eco-friendly and energy-saving. 3.4 different ways of installation. 4.1700K CCT to simulate the real flame. 5.Firm spike allow the torch insert to the ground stably. 6.Extra switch at the back for you to turn on or off as you like.
Brief Introduction This solar flame light can be charged by the solar panel on it during the day time, turns on automatically at the dusk and turns off at the dawn. Features Charged by solar panel and turn on automatically. Eco-friendly and energy-saving. 1700K CCT to simulate the real flame. Firm spike allow the torch insert to the ground stably. Extra switch at the back for you to turn on or off as you like.
Brief Introduction This solar flame light can be charged by the solar panel on it during the day time, turns on automatically at the dusk and turns off at the dawn. You can install them in two different ways: hanging and spike. Features Charged by solar panel and turn on automatically. Eco-friendly and energy-saving. 2 different ways of installation. 1700K CCT to simulate the real flame. Firm spike allow the torch insert to the ground stably. Extra switch at the back for you to turn on or off as you like.
Brief Introduction This solar flame light can be charged by the solar panel on it during the day time, turns on automatically at the dusk and turns off at the dawn. Features 1.Charged by solar panel and turn on automatically. 2.Eco-friendly and energy-saving. 3.1700K CCT to simulate the real flame. 4.Firm spike allow the torch insert to the ground stably. 5.Extra switch at the back for you to turn on or off as you like.
China Floating PV System Manufacturer Offers Floating Solar Photovoltaic Mounting Systems Custom Design, Environment Friendly, Sustainable, Easy To Install. Material: HDPE Plastic. Application: Generating Electricity. Manufacturing Process: Blow Molding. Design: Custom Design Including Project Design, Product Processing. Place Of Origin: Fujian, China (Mainland). Features: Low Cost, Environment Friendly, Easy To Install, High Productive, Above 25 Years Service Life.
Place of Origin:CN;ZHE Type:Standard Solar Panel Brand Name:Shinefar Size:solar panel: 1640x992x35mm Solar Panel Type:Grade A Polycrystalline Work Time (h):2-6hours Output Voltage (V):48V Battery Type:Lead Acid Controller Type:MPPT power:5000w Inverter Controller:5000w-50A/48V*1 Application:home Battery:150AH/12V*4 Solar panels:320w/30V*4
Technical Indicators Model MJLM-36-22-D Effective Laminating Area 2200 m 3600mm Overall dimension 17406mm (L) x3475mm (W) x2159mm (H) Heating Mode Oil conductive heating Compressed Air Pressure 0.6ï½?0.8MPa Operation Vacuum Degree 100-40Pa Evacuation Speed 70L/S Precision of Temperature Control ±1.5 Operating Temperature Range Room Temperature--180 Temperature uniformity Effective Laminating Areaâ?¤±2 Height of Laminating Chamber 30mm Evacuation Time Depending on the process, suggest: 5 ~ 8 min Upper Cover moving range 300mm
The equipment can be used for the I-V test of various high efficient solar module (PERC, N, HIT, IBC) and MBB The pulse width is 200ms (10-200ms continuous adjustable). It can effectively overcome this kind of high efficiency battery capacitance response and ensure the accuracy of test data; also it can be used to ensure the accuracy of the test data. In order to test the conventional P type single and poly-crystalline solar modules, one machine is used as the first choice for the large laboratories, testing and certification institutions and high efficiency battery production enterprises. The same type of intelligent electronic load equipped with the same type of equipment has been applied in NIM.
10w,20w,30w,50w,75w,100w,120w,160w ect.
150w,200w,300w ETFE film easy to carry
two folds:65w,80w,100w three folds:100w,120w,150w four folds:130w,160w,200w five folds:200w,250w can custom make
two folds:100w,120w,160w,200w three folds:150w,180w,240w,300w four folds:200w,240w,320w,400w can be all black, can custom make
Topsun main product is solar photovoltaic panel. Company manufacture solar panel ranges from 10wp to 260wp base on mono crystalline & multi crystalline high efficient solar cell. 1. High power module with precisely manufactured to achieve top most module conversion efficiency in the industries. 2. Ar coated cell surface to reduce the reflection of sunlight and bsf (back surface field) structure to improve cell conversion efficiency. 3. Due to use of high quality and iec certified raw materials from international reputed brands we assure our modules reliability, durability and consistency when exposed to real usage. 4. Rugged double-coated aluminum-alloy frame for longevity in adverse conditions. 5. Every batch of cells is individually inspected for optical & electrical parameters to ensure aesthetic appeal & consistent performance when the module is applied to an array. 6. Manufactured under iso 9001:2000 qms Technology & structure * mono / multi crystalline cells technology. * laminated in eva. * high transmission toughened glass as super state. * anodized aluminum frames. * terminal box with terminals.
Topsun solar home lighting system is appreciated for its high performance and compact structure. Incorporating the latest solar technology, our solar home lighting system harnesses the power of the sun to provide reliable, cost effective electricity wherever it is needed. This solar home lighting system supply electricity for lighting, entertainment and information to homes that are not connected to grids or where electric supply is quite erratic. Features: * 3 to 6 hours of operation under STC * Easy to install and operate. * Highly efficient electronics with PWM Charge Regulator. * 6 V output plug - (Optional) * Adequate protections for load and battery * DC Fan (< 20W) , Portable TV, Tape Recorder can be used * Available in customized and MNES approved models. Application: Domestic and commercial usage, shops, hospitals, farm houses, remote unelectrified village lighting, ashrams, ngo's education centers, health centers, schools, laboratories, outposts / check posts etc.
1000V DC TUV Solar PV Cable Product Description Simple on-site processing. Acomodates PV cable with different insulation diameters. Mating safety provided bykeyed housings. Multiple plugging and unplugging cycles . High current carrying capacity. TUV and UL approved.
Original Manufacturer of Portable Power Generators,Solar Power Station,UPS Lighting Lithium Solar Power System., Solar Panel Battery Portable Emergency Power Station
1. AC pure sine wave output 2. Solar charging and car charging directly 3. Small size, light weight, easy to carry 4.QC 3.0; Triple USB ports
Central System Collector Panel Tempered Prismatic Glass with Low Iron Oxide Aesthetic design and 100% sealing guarantee. Maximum thermal conductivity with ultrasonic welding technology stallation and installation in all roofs and constructions Tempered Prismatic Glass with Low Iron Oxide Aesthetic design and 100% sealing guarantee.
