The mold transport cart is designed for die or mold handling. The mold transport cart is powered by dragged cable. The capacity load of the mold transport cart can reach 500 tons. Depending on the size of the die or mold, you can choose the size and load capacity of the mold transport cart.
Working Principle
When the mold transport cart moves, the cable pulls behind the mold transport cart. The cable is connected to the ground at one end, while the other is powered by an electric control box on mold transport cart, and then provide the power to the engine.
The mold transport cart conduct AC 380V directly into the electrical control system of the mold transport cart to let it start, stop, go forward and backward and so on.
Performance Characters
1. As a common tool for short-distance transit across the factory, the mold transport cart has a simple structure, low production cost.
2. This series mold transport carts are suitable to be used in the bad environment, for example, high-tempeture and anti-explosion condition. Compared with KPX series cart, the using time is not limited.
3. Compared with KPD series cart, it has no strict requirement on the rail's installation. Compared with KPJ series cart, the cost is lower.
4. Mesa size, the gauge can be customized. Various non-standard mold transport cart can also be obtained.
5. Choose import wireless remote control, control the distance of 100 meters.
Cross-bay steering transfer cart is a kind of rail transfer cart which can solve the problem of product transportation between factory spans. It is also called rail flat cart, electric rail transfer cart and so on. The cross-bay steering transfer cart is running on the rails and powered by battery.
Working Principle
The battery is installed in the cross-bay steering transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the cross-bay steering transfer cart to start, stop, go forward, backward, adjust the speed and so on.
Safety Device
1. Acousto-optic warning lamp(When the cross-bay steering transfer cart is running, it will ring up to warn others)
2. Urgent stop button(When encountering unexpected situations, pressing the emergency stop button, the cross-bay steering transfer cart will immediately stop to ensure safety)
3. E-stops (The induction switch equipped on the front and rear of the cross-bay steering transfer cart, the cart will automatically stop when induction of obstacles, to ensure safe)
Load Capacity: 1-500 Ton (Can Be Customized As Per Demands)
Wheel Amount: 4/6/8
Application: Materials Transfer
Working Principle
The trackless material transfer cart is battery powered. The battery is installed in the trackless material transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the trackless material transfer cart to start, stop, go forward, backward, adjust the speed and so on.
2. Unlimited remote control, simple operation, safe and stable.
3. Standard imported controllers, meters, reliable, durable; waterproof and dustproof plug-in, to give the circuit a reliable protection, greatly reducing the electrical fault.
5. Emergency power off switch, turn speed limit, undervoltage protection, and other personnel safety features to ensure traffic safety.
6. Polyurethane rubber wheel, no damage to the ground, the body of high stability, not easy to slip.
7. Optional side pull battery, large capacity battery; support non-standard customization, such as the weight, body size and so on.
Applications
Die handling;
Portable machine base;
Assembly mount;
Metal coil transporter;
Heavy equipment transporter with lift deck;
Structural steel transporter;
Shuttle cart for pipe;
Pre-cast concrete production trolleys;
The trackless transport cart is a kind of material handling cart without rail. Large capacity, stable start, do not rely on rail, tow-way travel. Hydraulic steering mechanism ensures tight turning radius, enabling 360° turn in a small space.
The trackless transport cart can divided into two types, electric powered trackless transport cart and no powered trackless transport cart.
Advantages
1. No need install rail, no any damage to the floor.
2. It can realized double way moving and 360 degree turning.
3. Heavy loading capacity.
4. Small turning radius, flexible operation.
5. Braking distance is short, and have alarming system.
Applications
Transport of heavy payloads between crane bays
Transport of heavy loads through assembly line processes (I.e. railcar, construction equipment, agricultural equipment, truck, wind generator components, mining equipment, etc.)
Transport of heavy loads through fabrication processes.
The cross rail transfer cart is an electric flat cart designed for cross rails. It has eight wheels, four in the horizontal direction and four in the vertical direction. Its working principle is when the flatbed cart runs to the cross road, the cart will put down another set of four horizontal wheels, pack up four vertical wheels, and move the flat cart through the electric steering controller, it is powered by battery, but you can also choose other power supply mode.
The cross rail transfer cart is a kind of rail cart that can replace the electric turntable. It can be moved freely in multiple cross rails without the need of the matching turntable. The cart can complete the rail change operation and achieve a
1044 Small Trollies Related Items Suppliers
Short on time? Let Small Trollies Related Items sellers contact you.
About the powered die transfer cart, literally speak, it is an electric transfer cart for die and mold handling in industrial. The power supply of the powered die transfer cart can be choosed according different application, such as battery powered, conductor rail powered, cable drun powered, mobile cable powered, sliding wire powered and so on.
Brief introduction for rail handling bogieThe rail handling bogie,Website:http://www.newld-transfercar.com, equipped with a dragged chain on the rail handling bogie. One end of the cable is connected
with the ground power supply. After the cable pulley pulls the wire rope into the control box, the rail handling bogie is powered by the YZ motor. The motor drives the rail handling bogie to run smoothly through the reducer.Features of rail handling bogieThis series of rail handling bogie is suitable for lifting and metallurgy industry. Rail handling bogie structure is simple and reliable, the price is economical, maintenance
is convenient, and rail construction is convenient.Application of rail handling bogieThe processing of rail handling bogie  Delivery & Package of rail handling bogie
Product introduction for rail electric trolleyThe rail electric trolley generally including frame, travelling wheel, drive mechanism, power supply system, electric control system, operating system and other parts as client requirements. It also can add ladle device, lifting device, V-type support, weight device, display screen, traction device, according to client demands.Parts introduction for rail electric trolleyFrame: Generally adopts steel plate welding box beam structure, this kind of structure has advantage of light weight, strong bearing capacity, the vehicle structure is easy to install.Travelling wheel: Travelling wheel is directly using the crane rail wheel.Drive mechanism: Generally use F series parallel shaft helical gear reducer, K series of spiral bevel gear reducer, LD structure, planetary gear reducer, etc. Drive motor is based on the power supply.Power supply system: Power supply mode is divided into battery power supply, low voltage power supply, sliding contact line, cable drum power supply and towing cable power supply, etc. Electrical control system is also related to the power supply mode.Operating system: There are cable handle control and wireless remote control operation two models. Processing of rail electric trolley Safety operation Notes of rail electric trolley1.Rail electric trolley must have a professional personnel operation and maintenance.2.Before work, operator must check whether there is any obstacle on rails, electrical circuits and control switch is safe and reliable.3. Rail electric trolley must ring down to a smooth start, and note any abnormal situation around, ready for the parking at any time.4. During operation of the rail electric trolley should slow, forbidden to fast change direction.5. Banned for maintenance and cleaning the trolley when working.6. It cannot allowed to overloading.7.In case of sudden power off, it should turn the control switch to zero, after complete the work, must cut off power supply.
Factory direct supply wholesale stainless steel platform trolley with heavy duty Kunda A-033
1) Woking capabilities:100kgs(220 LB)
2) Product size:(L)915 x(W)510 x (H)900 mm(36* x 20" x 35.5")
3) Dia of tube:38/51mm,thickness of tube:1.0 mm
4) Net weight of products:15kgs(33 LB)
5) Come from direct manufacturer,attractive price,good service.
Description
1) 4 Heavy duty casters.
2) Easy to move with the swivel casters
