Product introduction for busbar powered motorized transfer trolley The kinds of motorized transfer trolley is powered by busbar. The sliding line is usually installed between two rails or one side. The slider takes AC 380V from the sliding line to provide the motor through the electric control cabinet system. , to achieve the motorized transfer trolley to forward, back, start, stop and other operations. The power supply mode is as follows: a trench is opened on the side of the rail, a safety wire is installed in the trench, and a cover plate is laid on the trench. When the motorized transfer trolley is in operation, the cover is lifted by a flap device mounted on the flat cart, and the slider power is used to supply power to the motorized transfer trolley, and the motorized transfer trolley is automatically returned to the ground through the rear cover plate. Performance characteristics for busbar powered motorized transfer trolley The installation method of the trolley rails in this series is not fixed, and can be installed in the track or on one side of the trench or on the nearest wall according to the site layout. Suitable for medium and long distance, frequent start and stop, work environment with high work intensity. Usage and maintenance for busbar powered motorized transfer trolley During the use of the sliding wire, it should be taken to keep it free from foreign matter in the sliding wire. If there is any foreign matter, it should be cleaned in time to avoid poor contact and affect the use of the motorized transfer trolley. If you find that the cable insulation is damaged during use, replace the cable with new one.
Product Introduction The mold transport cart is designed for die or mold handling. The mold transport cart is powered by dragged cable. The capacity load of the mold transport cart can reach 500 tons. Depending on the size of the die or mold, you can choose the size and load capacity of the mold transport cart. Working Principle When the mold transport cart moves, the cable pulls behind the mold transport cart. The cable is connected to the ground at one end, while the other is powered by an electric control box on mold transport cart, and then provide the power to the engine. The mold transport cart conduct AC 380V directly into the electrical control system of the mold transport cart to let it start, stop, go forward and backward and so on. Performance Characters 1. As a common tool for short-distance transit across the factory, the mold transport cart has a simple structure, low production cost. 2. This series mold transport carts are suitable to be used in the bad environment, for example, high-tempeture and anti-explosion condition. Compared with KPX series cart, the using time is not limited. 3. Compared with KPD series cart, it has no strict requirement on the rail's installation. Compared with KPJ series cart, the cost is lower. 4. Mesa size, the gauge can be customized. Various non-standard mold transport cart can also be obtained. 5. Choose import wireless remote control, control the distance of 100 meters.
Product Description Cross-bay steering transfer cart is a kind of rail transfer cart which can solve the problem of product transportation between factory spans. It is also called rail flat cart, electric rail transfer cart and so on. The cross-bay steering transfer cart is running on the rails and powered by battery. Working Principle The battery is installed in the cross-bay steering transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the cross-bay steering transfer cart to start, stop, go forward, backward, adjust the speed and so on. Safety Device 1. Acousto-optic warning lamp(When the cross-bay steering transfer cart is running, it will ring up to warn others) 2. Urgent stop button(When encountering unexpected situations, pressing the emergency stop button, the cross-bay steering transfer cart will immediately stop to ensure safety) 3. E-stops (The induction switch equipped on the front and rear of the cross-bay steering transfer cart, the cart will automatically stop when induction of obstacles, to ensure safe)
Product Details Usage: Industrial, Workshop, Warehouse, Port Wheel Type: Polyurethane Wheels Color: Customized Running Speed: 0-40 m/min (Adjustable) Load Capacity: 1-500 Ton (Can Be Customized As Per Demands) Wheel Amount: 4/6/8 Application: Materials Transfer Working Principle The trackless material transfer cart is battery powered. The battery is installed in the trackless material transfer cart. The batteries supplied the electricity to the DC motor through the electrical control system. By this ways, we can make the trackless material transfer cart to start, stop, go forward, backward, adjust the speed and so on. Features 1. Maintenance-free high-power AC drive system, providing reliable driving power; large-capacity battery, strong endurance. 2. Unlimited remote control, simple operation, safe and stable. 3. Standard imported controllers, meters, reliable, durable; waterproof and dustproof plug-in, to give the circuit a reliable protection, greatly reducing the electrical fault. 5. Emergency power off switch, turn speed limit, undervoltage protection, and other personnel safety features to ensure traffic safety. 6. Polyurethane rubber wheel, no damage to the ground, the body of high stability, not easy to slip. 7. Optional side pull battery, large capacity battery; support non-standard customization, such as the weight, body size and so on. Applications Die handling; Portable machine base; Assembly mount; Metal coil transporter; Heavy equipment transporter with lift deck; Structural steel transporter; Shuttle cart for pipe; Pre-cast concrete production trolleys;
Produscts Introduce The trackless transport cart is a kind of material handling cart without rail. Large capacity, stable start, do not rely on rail, tow-way travel. Hydraulic steering mechanism ensures tight turning radius, enabling 360° turn in a small space. The trackless transport cart can divided into two types, electric powered trackless transport cart and no powered trackless transport cart. Advantages 1. No need install rail, no any damage to the floor. 2. It can realized double way moving and 360 degree turning. 3. Heavy loading capacity. 4. Small turning radius, flexible operation. 5. Braking distance is short, and have alarming system. Applications Transport of heavy payloads between crane bays Transport of heavy loads through assembly line processes (I.e. railcar, construction equipment, agricultural equipment, truck, wind generator components, mining equipment, etc.) Transport of heavy loads through fabrication processes.
Products Introduction Of Cross Rail Transfer Cart The cross rail transfer cart is an electric flat cart designed for cross rails. It has eight wheels, four in the horizontal direction and four in the vertical direction. Its working principle is when the flatbed cart runs to the cross road, the cart will put down another set of four horizontal wheels, pack up four vertical wheels, and move the flat cart through the electric steering controller, it is powered by battery, but you can also choose other power supply mode. The cross rail transfer cart is a kind of rail cart that can replace the electric turntable. It can be moved freely in multiple cross rails without the need of the matching turntable. The cart can complete the rail change operation and achieve a
Product Description About the powered die transfer cart, literally speak, it is an electric transfer cart for die and mold handling in industrial. The power supply of the powered die transfer cart can be choosed according different application, such as battery powered, conductor rail powered, cable drun powered, mobile cable powered, sliding wire powered and so on. Character
Model Volume (m) Load (T) Gauge (mm) Wheel Base (mm) Wheel Diameter (mm) Traction (KN) Traction Height (mm) Overall Size (L*W*H) KFU0.55-6 0.55 1.3 600 500 300 60 320 1552*850*1150 KFU0.75-6 0.75 1.88 600 600 300 60 320 1700*980*1250 KFU1.0-6 1.0 2 600 600 300 60 320 1910*1070*130 KFU1.2-6 1.2 3 600 700 300 60 320 2228*1070*1320
mine material car model MLC2-6 MLC3-6 MLC5-6 MLC5(3)-9 MLC3-9 loadage(t) 2 3 5 5 3 track gauge(mm) 600 600 600 900 900 contour dimension(mm) 2000*880*1150 1050*1200*1200 3450*1200*1200 3450*1230*1200 2100*1150*1300 wheel base(mm) 550 750 1100 1100 900 wheel diameter 300 300 350 350 350 heigth of towing attachment(mm) 320 320 320 320 320 allowed traction(kn) 60 60 60 60 60 overall weight(kg) 520 520 920 940 790
Model Volume (m) Load (T) Gauge (mm) Wheel Base (mm) Wheel Diameter (mm) Traction (KN) Traction Height (mm) Overall Size (L*W*H) KC1.2-6 1.2 3 600 600 300 60 320 2100*1050*1200 KC1.6-6A 1.6 4 600 800 350 60 360 2500*1200*1300 KC2-6A 2 5 600 1000 400 60 385 3000*1250*1300 KC2.5-6A 2.5 6.25 600 1100 400 60 385 3500*1250*1300 KC3-6 3 600 1400 350 60 420 3600*1350*1335
Parameters unit key parameter Model 1.2M3 double Side type(N) 1.6M3 hydraulic pressure 2.5M3 Hydraulic pressure 4M3 Hydraulic pressure 6M3 Hydraulic pressure 8M3 Hydraulic pressure volume M3 1.2 1.6 2.5 4 6 8 load T 3 4 6.25 10 15 20 track gauge mm 600 762 762/900 762/900 762/900 762/900 wheel base mm 620 800 120 2000 2000 2600 wheel diameter mm 300 350 400 350 350 350 Binder shape Bolt link Bolt link Bolt link Bolt link Bolt link Bolt link Traction high mm 335 320 320 430 430 430 Uninstall Angle (.) 45 45 42 42 42 overall dimension long mm 2150 2500 3650 3650 4850 6350 wide mm 1450 1200 1250 1500 1500 1500 high mm 1270 1300 1300 1586 1586 1634 self weight 1000 1663 2505 3850 4900 6300 Traction speed km/h 12 12 12 8 8 8 turn radius m 8 10 12 15 15 18
Model loading (kg) L(mm) W(mm) H(mm) Rail gauge(mm) Wheel Dia.(mm) Pulling Height(mm) Weight (kg) MPC2-6 2000 2000 880 410 600 300 320 490 MPC3-6 3000 2400 1050 415 600 300 320 530 MPC5-6 5000 3450 1200 480 600 350 320 900 MPC5-9 5000 3450 1320 480 900 350 320 910 MPC10-6 10000 3460 1300 304 600 250 230 910 MPC10-9 10000 3460 1300 304 900 250 230 1030 MPC13-6 13000 3350 1400 342 600 300 270 1015 MPC15-6 15000 3460 1300 357 600 300 320 1160 MPC15-9 15000 3460 1300 357 900 300 320 1240 MPC18-6 18000 3350 1400 346 600 300 270 1132 MPC20-6 20000 3460 1300 364 600 300 320 1240 MPC20-9 20000 3460 1300 364 900 300 320 1320 MPC25-6 25000 3460 1300 390 600 350 320 1750 MPC25-9 25000 3460 1300 390 900 350 320 1800 MPC26-6 26000 2400 1462 390 600 240 280 1133 MPC30-6 30000 3460 1300 400 600 350 320 170 MPC30-9 30000 3460 1300 400 900 350 320 1900
Model load(t) Track Overall dimension Wheelbase Dia. of wheel Length Width Height mm YPC1-6-6 1 600 1500 850 400 500 300 YPC3-6-6 3 600 1900 1050 425 600 300 YPC3-7 3 762 1900 1050 425 600 300 YPC5-6 5 600 3000 1200 510 1000 400 YPC5-7 5 762 3000 1200 1650 1000 1000 YPC5-9 5 900 3000 1200 510 1000 320
Model Mine Car Weight kg Track mm Wheel Diameter Max Axle Distance of wheels Min distance of covers Axle diameter ZBL600/300 â?¤2400 600 300 808 510 60 ZBL762/300 762 970 672 ZBL900/300 900 1108 810 ZBL600/350 â?¤6700 600 350 850 490 80 ZBL762/350 762 1012 652 ZBL900/350 900 1150 790 ZBL600/400 â?¤9000 600 400 870 476 95
Brief introduction for rail handling bogieThe rail handling bogie,Website:http://www.newld-transfercar.com, equipped with a dragged chain on the rail handling bogie. One end of the cable is connected with the ground power supply. After the cable pulley pulls the wire rope into the control box, the rail handling bogie is powered by the YZ motor. The motor drives the rail handling bogie to run smoothly through the reducer.Features of rail handling bogieThis series of rail handling bogie is suitable for lifting and metallurgy industry. Rail handling bogie structure is simple and reliable, the price is economical, maintenance is convenient, and rail construction is convenient.Application of rail handling bogieThe processing of rail handling bogie  Delivery & Package of rail handling bogie -
Product introduction for rail electric trolleyThe rail electric trolley generally including frame, travelling wheel, drive mechanism, power supply system, electric control system, operating system and other parts as client requirements. It also can add ladle device, lifting device, V-type support, weight device, display screen, traction device, according to client demands.Parts introduction for rail electric trolleyFrame: Generally adopts steel plate welding box beam structure, this kind of structure has advantage of light weight, strong bearing capacity, the vehicle structure is easy to install.Travelling wheel: Travelling wheel is directly using the crane rail wheel.Drive mechanism: Generally use F series parallel shaft helical gear reducer, K series of spiral bevel gear reducer, LD structure, planetary gear reducer, etc. Drive motor is based on the power supply.Power supply system: Power supply mode is divided into battery power supply, low voltage power supply, sliding contact line, cable drum power supply and towing cable power supply, etc. Electrical control system is also related to the power supply mode.Operating system: There are cable handle control and wireless remote control operation two models. Processing of rail electric trolley Safety operation Notes of rail electric trolley1.Rail electric trolley must have a professional personnel operation and maintenance.2.Before work, operator must check whether there is any obstacle on rails, electrical circuits and control switch is safe and reliable.3. Rail electric trolley must ring down to a smooth start, and note any abnormal situation around, ready for the parking at any time.4. During operation of the rail electric trolley should slow, forbidden to fast change direction.5. Banned for maintenance and cleaning the trolley when working.6. It cannot allowed to overloading.7.In case of sudden power off, it should turn the control switch to zero, after complete the work, must cut off power supply. -
Material: stainless steel Size: (l*w*h)1050*610*1900mm Color: silver / gold or customizied
Material: stainless steel Size: (L*W*H)1080*480*900mm Color: Gold or customizied
Factory direct supply wholesale stainless steel platform trolley with heavy duty Kunda A-033 1) Woking capabilities:100kgs(220 LB) 2) Product size:(L)915 x(W)510 x (H)900 mm(36* x 20" x 35.5") 3) Dia of tube:38/51mm,thickness of tube:1.0 mm 4) Net weight of products:15kgs(33 LB) 5) Come from direct manufacturer,attractive price,good service. Description 1) 4 Heavy duty casters. 2) Easy to move with the swivel casters
Material: Iron+painting Size: (L*W*H)1220*455*1600mm Color: Silver or customizied
