Cu+Zn Scrap Quantity: +2 million tons (1.5 million tons Cu + 540k tons Zn) Origin: Mexico Cu Composition: Cu=33%,Fe=25%, Mg=12%, Cr=11.5% Si=6% (and more minerals) Zn Composition= ZnO=40%, SiO2=20%, Al2O3=12%, Fe2O3 = 9%, P2O5 = 6%, CuO= 5% (and more minerals) Form: Rocks
Sintered Calcium Aluminate ( Sintered Refining Slag) is calcined in the rotary kiln with the high quality raw materials.It is a good quality refining agent.It is characterized by very strong desulfurization and deoxygenation, low melting point,high melting speed, it can shorten smelting time, reduce the energy consumption,reduce dust pollution in the steel plant,reduce the consumption of the ladle refractory materials,increase the service life of the ladle.
Synthetic Slag is neither a by-product nor a blended material, but a calcium aluminates with controlled composition. Pre-melting ensures a homogenous consistent chemical composition, as well as the most efficient mineralogical phases. In secondary metallurgy, Synthetic Slag is preferably added during the tapping operation of the steel into the ladle. The flux will quickly form a reactive and fluid slag with the other materials.
Additives for concrete, cement, plastering mortar, reinforce weak ground, improve soil Benefits Reducing hydration, increasing waterproofing, increasing durability, reducing costs for concrete
Basicity (CaO + MgO + A12O3)/Si02 = 1.60 min Moisture content (%) = 10.0 Max Magnesium Oxide content (MgO) (%) = 10.0 Max Loss on Ignition (%) = 0.50 Max Size :< 5mm (%) = 90.0 Min Calcium Oxide (CaO) (%) = 36.0 Min Glass content (%) = 95.0 Min
Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes
For Sale We Have Copper Slag. Delivered Fob Chile Delivery.
There are two types of Ferro-nickel slags that we have as below. Both products are manufactured in Korea and waiting for your offers. Since details such as Incoterms, payment terms, price, volume are subject to further discussion, please contact me through mail first. 1) Ferro nickel slag (which is generated after refining at furnace) -. Contents : NiO : 4-6% / Sio2 : 20-25% / Cao : 25 -30% / MgO 2% / Fe: 17-22% / Al2O3 : 4-6% -. Application : Nickel source 2) Ferro nickel slag (which is manufactured during slag tapping) -. Contents : Sio2 : 50-55% / MgO : 30-35% / Fe : 6-7% / Al2O3 : 2% CaO : 0.5 / Mn : 0.3 -. Application : Sand-blasting, Molding sand, Abrasive, Aggregate etc.. I appreciate your efforts in advance. Best regards,
We supply and export FerroNickel Electrofurnance Slag. Our Slags are registered under REACH regulation. Conditions are FOB Durr�«s Port in Albany. Application: Sandblasting / High density submarine oil and gas pipe coating aggregate / Additional iron to clinker (Substituting the raw material in cement industries with our slag allows deduction of the ton of CO2 that plants would otherwise have accounted in their carbon balance) / Railway ballast / High strength concrete / Beach aggregate / Granular base for road construction. Most common ingredients: Ingredient and Content Classification (CLP) Silicon Dioxide 30 - 50% Iron 15 - 35% Magnesium Oxide 13 20% Aluminium Oxide 1 4% Chromium (III) Oxide 1.4 3% Nickel < 0.15% Sulfur 0.1% Calcium oxide 3 5%
Cast Iron Slag Pot is a key equipment used to hold high-temperature slag generated during steel smelting process.Cast Iron Slag Pot is mainly made of Carbon Steel or Alloy Steel.The maximum temperature of Cast Iron Slag Pot could reach 1600 F.
SMS steel slag available 200000 MTS available in India.The following chemical analysis are as follows : Cr203%=5.06 FeO%=1.87 MnO%=4.15 SiO2%=29.35 CaO%=34.1 A1203%=11.52 MgO%=11.13.
Blast Furnace Slag
Krishna Enterprises are produces as the crystallization have higher purity and hardness of copper slag. We are leading manufacturer of copper slag and supply our entire nation. We. Having Processing Plant in South india and North India Regions Near to Indian Ocean Ports. We are producing material based on research and sales on products in global market. These are according to the client demand. We are dealing in copper slag that is made by superior quality with required customized size. Why choose our Copper Slag? Our copper slag is environmentally friendly abrasive Our copper slag is low dusting material. Our copper slag is nontoxic abrasive. Our available Copper Slag size is: 0-3 mm as per Customers Required Our Copper Slag color: Black Quality: Our copper slag is high purity, durable, and super-fine granular. Our available packing size:25/40kg,1MT jumbo Bags or as per client's demand. Application: Copper slag mostly used in sand blasting gun Copper slag is used in the bronze welding (brass welding) of copper, cast iron, and malleableiron and for the fusion welding of materials of the same or closely similar composition Intended for use in bronze welding (brass welding), cast iron or malleable iron Old steel outdoor surface cleaning, rust removal, strengthening the like. As a wear-resistant Floor aggregate, it can be made of hard floor tiles for squares, garages and other non-slip floor. Used in counter weight sand, such as cement plants. After fine processing, it can apply to denim coating and spraying a variety of more sophisticated use. Copper slags is used for the copper and copper alloy filler rods Additional Information: Delivery Time: Depend on quantity Packaging Details: As per customer client's demand
The granulated blast-furnace slag is sand-type slag manufactured by spraying high-pressure water jets on a blast-furnace molten slag.
Ground granulated blast furnace slag (GGBS) is a by-product from the blast-furnaces used to make iron. Blast furnaces are fed with controlled mixture of iron-ore, coke and limestone, and operated at a temperature of about 1,500�°C. When iron-ore, coke and limestone melt in the blast furnace, two products are producedâ??molten iron, and molten slag. The molten slag is lighter and floats on the top of the molten iron. The molten slag comprises mostly silicates and alumina from the original iron ore, combined with some oxides from the limestone. The process of granulating the slag involves cooling of molten slag through high-pressure water jets. This rapidly quenches the slag and forms granular particles generally not bigger than 5 mm. The rapid cooling prevents the formation of larger crystals, and the resulting granular material comprises around 95% non-crystalline calcium-alumino silicates. The granulated slag is further processed by drying and then grinding in a vertical roller mill/rotating ball mill to a very fine powder, which is GGBS. Applications of GGBS Powder �· Replacement of cement for super structure Ready Mix Concrete Cement Manufacturing Precast Manufacturing Packing Details: 25 kg HDPE Bags, 50 Kg HDPE Bags, 1 ton Jumbo Bags and As per Customer's requirements
1.- PRICE: 40,00 US$ per ton 2.- PRODUCT: Electric steelmill slag (iron slag) Mining material from primary metallurgy or smelting of raw materials that are generated in electric arc furnaces. 5.-SPECIFICATIONS: Contained in the Attached Technical Sheet 6.- MONTHLY SUPPLY AMOUNT 100,000 metric tons or more monthly. (Shipment 25.000 MT) 7.- TOTAL AMOUNT OF ANNUAL SUPPLY 1,200,000 metric tons per year, at a rate of 100,000 MT per month. The selling company is capable of supplying, through a firm, definitive and direct sale, the amount of one million two hundred thousand metric tons (1,200,000 MT) per year. In the event that the buying company decides to buy a smaller volume of the product, it could do so, from a minimum of four hundred thousand MT (400,000 MT), for its withdrawal within a period of four (4) months, from the date of the respective contract, because the company has a monthly supply capacity of 200,000 tm of said product
We are the supplier of Processed Copper Slag. Cu - 0.60-0.70, Fe - 55-60, SiO - 26-30, AI 1.0 - 3.0, FeO 1.0 - 2.0, Angular, Sharp Edgues, Multi faced. Kindly send inquiry for more detail for product and price negotiation.
granulated blast furnace slag (a) Ca O: 30 to 38 % (b) Si O2:30to 40 % (c)Al 2O3:15 to22% (d)MgO:8 to11% (e) Fe O: 0.49% (f) MnO: 2% (g) Glass Content: 90% Max If u want more quantity i can supply frequently.
Silicon slag is a grayblack granular solid waste produced by partial oxidation and partial reduction of silicon materials at high temperatures Silicon slag mainly comes from silicon material processing processes in the metallurgy and semiconductor industries such as silicon wafer slicing ferrosilicon smelting and other processes The main components of silicon slag are SiO2 and a small amount of FeO Al2O3 CaO and other elements and oxides 1 Make cement Silica slag can be used as an additive in cement clinker to replace some materials such as plaster of paris or fly ash in cement clinker Silica slag can promote the hydration reaction of cement clinker and enhance the early strength and longterm performance of cement 2 Making glass Silica slag is an important raw material for glass manufacturing It can replace part of the raw materials such as quartz sand and sodium carbonate reduce the cost of glass production and at the same time improve the quality and weathering resistance of the glass 3 Manufacturing Ceramics After silicon slag is mixed with materials such as alumina calcium oxide and magnesium oxide highperformance refractory ceramic materials can be prepared These materials have excellent properties such as hightemperature fire resistance high strength and wear resistance and are widely used in hightemperature furnaces chemical equipment and other fields 4 Manufacturing building materials Silica slag can be used as a raw material for manufacturing building materials such as building bricks sound insulation panels and thermal insulation materials Building materials made of silicon slag have high strength wear resistance fire resistance and other properties and also have good heat and sound insulation properties 5 Other uses Silicon slag can also be used to manufacture graphite electrodes iron oxide pigments electrical insulation materials and other products In addition silica slag can also be recycled such as used to make road hardeners lowcarbon cement etc
As the important metallurgical containers, the slag pot plays an important role in steelmaking production and steel slag processing. The slag pots in Tenfaye are cast steel slag pots, which are divided into 2.13m�³, 4m�³, 5m�³, 9m�³, 12m�³, 16m�³, 18m�³, 20m�³, 24m�³ and other types of slag pots. Slag pot weight: 5-75 tons. Common material of slag pot. A comprehensive data bank containing previous experiences combined with advanced software implementing the Finite Element Analysis serves custom engineered design optimization.� According to the requirements of the customer's drawings, appropriate wooden molds can be selected for modeling design. Huazhu CAE is used to simulate pouring before pouring. Strictly follow the wooden mold - modeling - smelting and pouring - insulation - sand removal from the pit - heat treatment - rough and fine processing - packaging and delivery process, integrated casting, strong deformation resistance, and casting high-quality slag pot.
