Copper Slag
Slag Remover is a neutral substance that will swell or melt under the action of high temperature. After expansion, it will form hollow air holes with low specific gravity and has a certain degree of adhesion after melting, which is mainly determine the processing technology. The main components are SiO2, Al2O3, and a small amount of other alkaline oxides. Uses: Slag remover is widely used in Iron and Steel smelting casting because it is melted under high-temperature operation more than 1200 C, and has adhesiveness, so it can be effectively aggregated and adsorb slag and slag on the surface of the metal. Specifications of Slag Remover agent: 18-30 mesh, 20-40 Mesh, 50-80 mesh, etc. Product Feature: No Splash, Safe and reliable Packaging: 25kg/bag, 50kg/bag, 1000kg/bag. Lead Time: 10-15 days after receiving the customer's prepayment and original LC. Please contact us for inquiry.
As a heavy industry enterprise with considerable strength in China, QIANJIN Heavy Industry produces various slag tanks, which can be processed according to the drawings provided by customers. In addition, QIANJIN slag pot has been successfully sold to more than 50 countries and regions such as The United States, Mexico, Brazil, India, South Korea, Japan, Russia and other products industries involving cement ships through continuous improvement of process and optimization of chemical composition Forging, pressing, metallurgy, engineering machinery, bridge, water conservancy and power generation, etc., provide many varieties and specifications of high quality carbon steel alloy steel castings for the national key equipment manufacturing industry
Copper slag is a by-product produced during the smelting of copper, which is then processed into abrasive products. Typically it is composed of Ferro silicate material and oxides formed when the molten slag is quenched in cold water. This cooling process fractures the slag into coarse, angular particles making it an ideal choice in many applications. It is a low-cost expendable abrasive suited for open blast cleaning and due to its low silica content, it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. Applications of Copper Slag include abrasive blasting, building materials, landfilling, road construction, abrasive tools, cutting tools, tiles, glass, and roofing granules.
The Slag conditioner offered by us helps in adjusting Slag composition in a way that it interacts in a balanced way with steel, thus helping in maintaining proper equilibrium. Further, it also helps in absorbing inclusions as well as impurities and assists in producing a cleaner as well as better quality steel. Further, the use of the material also helps in lowering melting temperature of slag as well as increasing its fluidity, thus helping in maintaining proper as well as desired slag composition. We also have extensive industry experience in successfully matching up with the demands of Slag Conditioner Material. It features pure constitution and assists in ensuring that there is no harmful reversion of P, S, and unwanted oxides in the Steel making process.
Silicon slag is a by-product of smelting metal silicon and ferrosilicon.It is a kind of scum floating on the furnace in the process of smelting silicon.It is content is from 45% to 70%,and the rest are C,S,P,Al,Fe,Ca. It is much cheaper than purity silicon metal.Instead of ferrosilicon for steelmaking, can reduce the cost. Silicon slag 50 is Si greater than or equal to 50, Ca less than 5, S less than O0.1, P less than 0.05, C less than 5.
Additives for concrete, cement, plastering mortar, reinforce weak ground, improve soil Benefits Reducing hydration, increasing waterproofing, increasing durability, reducing costs for concrete
Basicity (CaO + MgO + A12O3)/Si02 = 1.60 min Moisture content (%) = 10.0 Max Magnesium Oxide content (MgO) (%) = 10.0 Max Loss on Ignition (%) = 0.50 Max Size :< 5mm (%) = 90.0 Min Calcium Oxide (CaO) (%) = 36.0 Min Glass content (%) = 95.0 Min
Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes
Slag is a by-Product of smelting pyro metallurgical ores and used metals. Broadly it can be classified as ferrous (by-products of processing iron and steel), ferroalloy (by-product of ferroalloy production) or non-ferrous / base metals (by-products of recovering non-ferrous materials like copper, nickel, zinc and phosphorus).
Metallurgical slag (iron-containing flux). Content: - FE2O3 42-48%, - SIO2 10-12% - AL2O3 4,47% - CaO 20 - 25% - MgO 5,43% Used for production: - "Portland" cement, - Fertilizers, - Brake pads, - Metal blanks and articles, - Construction, - Construction of railway roads and rails Our slag can be used as an agglomerate in the production of blast furnace ore. Iron oxide prevails in the form of FeO - which allows you to additionally obtain iron from the flux during smelting.
There are two types of Ferro-nickel slags that we have as below. Both products are manufactured in Korea and waiting for your offers. Since details such as Incoterms, payment terms, price, volume are subject to further discussion, please contact me through mail first. 1) Ferro nickel slag (which is generated after refining at furnace) -. Contents : NiO : 4-6% / Sio2 : 20-25% / Cao : 25 -30% / MgO 2% / Fe: 17-22% / Al2O3 : 4-6% -. Application : Nickel source 2) Ferro nickel slag (which is manufactured during slag tapping) -. Contents : Sio2 : 50-55% / MgO : 30-35% / Fe : 6-7% / Al2O3 : 2% CaO : 0.5 / Mn : 0.3 -. Application : Sand-blasting, Molding sand, Abrasive, Aggregate etc.. I appreciate your efforts in advance. Best regards,
Silicon Slag Silicon Metal Slagis a byproduct from the manufacture of silicon metal it is a kind of mixture which contains the main content Silicon 3565 and other components such as C S P Al etc It is a good substitute for FeSi in steel making which has advantage in lowing the cost of production and reusing resource Usually we use silicon slag to produce silicon briquette which is far and wide market in domestic and internationalour silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors Aluminum manufactures to improve the useful properties of aluminum as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic
We supply and export FerroNickel Electrofurnance Slag. Our Slags are registered under REACH regulation. Conditions are FOB Durr�«s Port in Albany. Application: Sandblasting / High density submarine oil and gas pipe coating aggregate / Additional iron to clinker (Substituting the raw material in cement industries with our slag allows deduction of the ton of CO2 that plants would otherwise have accounted in their carbon balance) / Railway ballast / High strength concrete / Beach aggregate / Granular base for road construction. Most common ingredients: Ingredient and Content Classification (CLP) Silicon Dioxide 30 - 50% Iron 15 - 35% Magnesium Oxide 13 20% Aluminium Oxide 1 4% Chromium (III) Oxide 1.4 3% Nickel < 0.15% Sulfur 0.1% Calcium oxide 3 5%
Cast Iron Slag Pot is a key equipment used to hold high-temperature slag generated during steel smelting process.Cast Iron Slag Pot is mainly made of Carbon Steel or Alloy Steel.The maximum temperature of Cast Iron Slag Pot could reach 1600 F.
SMS steel slag available 200000 MTS available in India.The following chemical analysis are as follows : Cr203%=5.06 FeO%=1.87 MnO%=4.15 SiO2%=29.35 CaO%=34.1 A1203%=11.52 MgO%=11.13.
We are the supplier of Processed Copper Slag. Cu - 0.60-0.70, Fe - 55-60, SiO - 26-30, AI 1.0 - 3.0, FeO 1.0 - 2.0, Angular, Sharp Edgues, Multi faced. Kindly send inquiry for more detail for product and price negotiation.
granulated blast furnace slag (a) Ca O: 30 to 38 % (b) Si O2:30to 40 % (c)Al 2O3:15 to22% (d)MgO:8 to11% (e) Fe O: 0.49% (f) MnO: 2% (g) Glass Content: 90% Max If u want more quantity i can supply frequently.
Silicomanganese Slag Felman Production generates a residual commercial by-product, silicomanganese slag, through the production of Ferro Silicomanganese (FeSiMn). The slag is an inert solid green material consisting primarily of aluminum, manganese, magnesium, silicon, and calcium oxides. Production The slag is generated during the production of ferro silicomanganese using electric arc furnaces. The molten slag is casted, cooled by spraying it with cold water, and then crushed to the desired size. Potential Uses Potential uses of the commercial by-product include re-melt/reproduction, industrial fill, road base, textiles manufacturing, etc. Chemical Composition Below please find the available metals totals for the chemicals that were detected as components of the slag material. The material is considered non-hazardous as shown by Toxicity characteristic leaching procedure testing conducted on the material. A qualified and licensed environmental laboratory is currently conducting a general assay of the material to determine the % w/w of the different chemical components. TCLP Testing of Slag Chemical Slag Leachate RCRA Hazardous Waste Limits mg/L mg/L Arsenic ND 5.0 Barium 0.85 100.0 Cadmium 0.0011 1.0 Chromium 0.02 5.0 Lead ND 5.0 Mercury ND 0.2 Selenium ND 1.0 Silver ND 5.0 Slag Available Metals Totals Chemical mg/kg Aluminum 88,900 Barium 5,590 Calcium 151,000 Iron 7,230 Magnesium 28,400 Manganese 85,000 Potassium 12,200J Physical Aspects of the Material The material is a hard solid stone that has irregular fracturing similar to chert or glass. The material is primarily green, gray, and black in color and is odorless. The bulk density of the material is approximately 635 +/- 100 kg/m3. Material Size: Generally, one-to-four-inch stone, but can be crushed and sized to the clients desired specifications.
Silicon slag is a grayblack granular solid waste produced by partial oxidation and partial reduction of silicon materials at high temperatures Silicon slag mainly comes from silicon material processing processes in the metallurgy and semiconductor industries such as silicon wafer slicing ferrosilicon smelting and other processes The main components of silicon slag are SiO2 and a small amount of FeO Al2O3 CaO and other elements and oxides 1 Make cement Silica slag can be used as an additive in cement clinker to replace some materials such as plaster of paris or fly ash in cement clinker Silica slag can promote the hydration reaction of cement clinker and enhance the early strength and longterm performance of cement 2 Making glass Silica slag is an important raw material for glass manufacturing It can replace part of the raw materials such as quartz sand and sodium carbonate reduce the cost of glass production and at the same time improve the quality and weathering resistance of the glass 3 Manufacturing Ceramics After silicon slag is mixed with materials such as alumina calcium oxide and magnesium oxide highperformance refractory ceramic materials can be prepared These materials have excellent properties such as hightemperature fire resistance high strength and wear resistance and are widely used in hightemperature furnaces chemical equipment and other fields 4 Manufacturing building materials Silica slag can be used as a raw material for manufacturing building materials such as building bricks sound insulation panels and thermal insulation materials Building materials made of silicon slag have high strength wear resistance fire resistance and other properties and also have good heat and sound insulation properties 5 Other uses Silicon slag can also be used to manufacture graphite electrodes iron oxide pigments electrical insulation materials and other products In addition silica slag can also be recycled such as used to make road hardeners lowcarbon cement etc
