Tempered Glass. Laminated Glass, Insulated Glass And Fire Rated Glass.
E3 3/32 TIG WELDING TUNGSTEN ELECTRODES REPLACES 2% TUNGSTEN E3 1/8 TIG WELDING TUNGSTEN ELECTRODES REPLACES 2% TUNGSTEN E3 1/16 TIG WELDING TUNGSTEN ELECTRODES REPLACES WT20 E3 Tungsten Electrodes deliver superior arc starting, electrode lifetime, and overall cost effectiveness. Users of 2% thoriated tungsten can switch to E3 tungsten with confidence. E3 requires fewer re-grinds and provides longer overall lifetime when compared to 2% thoriated. E3 tungsten can be used on DC electrode positive or negative with a pointed end, or balled for use with AC power sources. Featues over Thoriated Tungsten Lower operating temperature Fewer re-grinds Improved arc starting Versatile use Size: 1.2mmx175mm 2.0mmx175mm 2.4mmx175mm 3.0mmx175mm 3.2mmx175mm 4.0mmx175mm 5.0mmx175mm 1.2mmx150mm 2.0mmx150mm 2.4mmx150mm 3.0mmx150mm 3.2mmx150mm 4.0mmx150mm 5.0mmx150mm Black rod * 2.0mmx450mm * 2.4mmx450mm * 3.0mmx450mm * 3.2mmx450mm * 4.0mmx450mm * 5.0mmx450mm * 6.0mmx450mm * 8.0mmx450mm Polished * 800-1000mm in length
Tungsten Electrodes ,Welding Wire, Welding Electrode, Welding Flux, Welding Consumer, Flux Cored Welding Wire, Tungsten Rod, Tungsten Electrode, Tig Rod, Mig Wire,.
Tempered glass (also known as Toughened glass) is a type of safety glass processed by uniform heat treatment to increase its mechanical strength and thermal impact strength compared with normal glass. Tempering puts the outer surfaces into compression and the interior into tension.Such stresses cause the glass, if fractured, to shatter into small, relatively harmless granular chunks. All fabrication, such as cutting to overall dimensions, edgework, drilled holes, notching, grinding, sandblasting, and etching, shall be performed prior to tempering. After the glass has been tempered, it shall not be modifified except as recommended by the fabricator.
The design of low-speed electric vehicles. The body of a low-speed electric vehicle can be made from a variety of materials, but the most common are aluminum and steel. Aluminum is lightweight and has a high strength-to-weight ratio, making it an ideal choice for electric vehicles. Steel is also strong and durable, but it is heavier than aluminum and may not be as efficient. When choosing the material for the body of a low-speed electric vehicle, it is important to consider the weight of the vehicle. The heavier the vehicle, the more energy it will need to move. For this reason, lightweight materials such as aluminum are often preferred. Another important consideration in the design of the body of a low-speed electric vehicle is aerodynamics. A streamlined shape will help reduce drag and improve efficiency. Electric vehicles typically have a lower drag coefficient than gasoline-powered vehicles, but there are still ways to improve upon this. One way to do this is by using smooth, curved surfaces instead of sharp angles. The battery of low-speed electric vehicles . The battery stores electrical energy that powers the motor in an electric vehicle . Lead - acid batteries were once commonly used in electric vehicles , but they have since been replaced by lithium - ion batteries . Lithium - ion batteries are lighter , last longer , and provide more power than lead - acid batteries . However , they are also more expensive . When selecting a battery for a low- speed electric vehicle , it is important to consider its capacity , weight , discharge rate , and charging time . A battery with a higher capacity will store more energy and last longer between charges , but it will also be heavier . A battery with a higher discharge rate can provide power for acceleration , but it will need to be recharged more often . And finally , a battery with a shorter charging time will be more convenient for drivers , but it may cost more upfront . The future of low-speed electric vehicles. As the world becomes increasingly urbanized, the need for low-speed electric vehicles will continue to grow. Low-speed electric vehicles are quiet, emissions-free, and efficient, making them ideal for city driving. With advances in battery technology, low-speed electric vehicles are becoming increasingly affordable and reliable.
Hopper-Aluminium alloy Size:532 1100 400mm Loading capacity 220kg 4wheels, 1 seat Size: 2400x1260x1700mm The size of the cargo box:532 1159 1050m The size of the hopper:532 1100 400mm Curb weight:400kg Loading capacity:220kg Max. speed: 45km/h Cargo Box-BF: Basalt Fiber Size: 532 1159 1050mm Loading capacity 220kg 105Ah lithium batter, Max distance 100km,with fast charge system, full charge in 3 hours;
JINMA J1D Size:2300*1260*1700mm Max speed:45km/h Max range:115-200km Capacity:1 person Cargo box size:532*1159*1050mm Hopper size:532*1100*400mm Steering mode: Handlebar Charge time:2-3hours (105AH battery)/6 hours (206ah battery)
3 wheels, 2 seats Size: 2160x1150x1680mm Curb weight:310kg Loading capacity :150kg Max. speed:45km/h 105Ah lithium battery Max. range 130km ,with fast charger system can be full charge in 3 hours. Color: White&Silver Red&Silver Blue&Silver Grey&Black
Electric Cars J1 Short-distance driving for shopping, daily commute, as family s second or third vehicle. 3 wheels, 2 seats Size: 2160x1150x1680mm Curb weight:310kg Loading capacity :150kg Max. speed:45km/h 105Ah lithium battery Max. range 130km ,with fast charger system can be full charge in 3 hours. 1. ABS Resin Plastic Cover and painting Whole cover with ABS Resin plastic , have excellent comprehensive physical, impact resistance, Stability, two-thirds lighter weight 2, LED Light System The integrate LED head &rear-light.Turn lights, brake lights, reverse lights. Low power consumption and increase 50% more in light transmittance. 3, Front Windshield CCC certified tempered and laminated glass Improve visual and safety. 4, Dashboard LCD display, volt meter, power meter, kilometer, and reverse camera, plus Bluetooth, MP5, and USB connector. 5, Central lock and One button start 6. AC Motor (3000W) AC motor with auto-hold function, powerful and waterproof, lower noise, no carbon brush, maintenance-free. Equipped with 7.Lithium Iron Phosphate Battery With BMS system, more than 2,500 times charging cycles(8-10 years) under working environment from -30 to 50 C. Equipped with fast home
J2 1. lithium battery or lead acid battery 2. range:90-120km 3. weight::416kg 4.max speed:45km/h 5.charge:6-7 hours /quick charger 2-3 hours 6.steering mode:middle steering wheel 7.load capacity:150kg
J1 3-Wheel electric vehicle L2e-p 1. Lithium batteries or lead acid batteries. 2.Range:90-120km 3.Curb weight:310kg 4..Load capacity:150kg 5.Max speed:45km/h 6.3 seats 7.2.2kw motor or 3kw 8. Charge time:6-7hours or 2-3 hours(quick charger)
4 Wheel electric car for passengers 1.2390*1200*1700mm 2. Max speed:45km/h 3. Range: 90km 4. Lead Acid batteries,60v80ah 5pieces 5.capacity:2-3 people 6.front,dic ;rear,drum 7.curb weight:416kg
Low speed electric vehicles..
