ASTM A554 Stainless Steel Square Tube
304 Stainless Steel Square Tubing is ideal for most fabrication techniques as well as indoor and outdoor applications. This non-magnetic product features a semi-smooth, dark gray finish and tapered edges with accurate dimensions throughout its length.304 Stainless Steel is a high strength material with excellent corrosion resistance, making it ideal for marine equipment, railings, medical equipment, and food industry equipment.ASTM A554 is the standard specification for welded stainless steel mechanical tubing.
AR400 Steel
AR400 is designed for wear and abrasion applications.Typical hardness of AR400 ranges from 360-444 BHN, which is slightly lower than AR450.Like other wear-resistant steels, it does not have a defined chemical composition, but rather a grade based on hardness.
Benefits of AR400 Steel
When determining which wear-resistant steel is best for your application, it is important to note that each grade responds differently to many manufacturing processes.AR400 steel plate is ideal for applications that require wear resistance but must be formable and weldable. Because of these properties, it can be used in a variety of different applications. It is particularly suitable for applications where impact or sliding wear may be present.
Properties of AR400 Steel
In addition to its general properties of formability, AR400 steel has the following mechanical properties while maintaining good wear resistance:
Machining = fair
Bending = good
Corrosion resistance = good
Welding = excellent
Wear resistance = very good
Provides excellent resistance to impact and sliding wear at a moderate cost.
Recommended for: Lining of mining and material handling equipment such as dump trucks, material transfer chutes, storage bins, buckets and hoppers
AR500 Steel Plate
AR500 steel plate has a high surface hardness for excessive wear and high impact applications.
What is AR500 steel plate?
AR500 is an Abrasion Resistant (AR) steel plate known for its hardness, toughness and wear resistance. This grade is one of the hardest of the common AR steel plate grades - with Brinell hardness values (BHN) ranging from 460-544 - and is typically used in high wear and impact applications. AR500 steel plate meets the ASTM E10 specification for Brinell hardness testing.
Overview:
Wear resistant steel plates for high wear applications such as mining equipment and concrete handling.
Surface hardness range of 470-540 BHN.
Excellent resistance to sliding wear, frictional wear and heavy wear.
Withstands high impact stresses even at very low temperatures.
Advantages of AR500 steel plate
The hardness and toughness of AR500 steel plate makes it extremely resistant to wear and impact. These properties make AR500 steel a durable, long-lasting material, which is essential for applications that require materials that can withstand extreme wear and tear.
The durability of AR500 also means that the material needs to be replaced less often than less wear resistant materials, which reduces material costs and prevents devastating equipment failures.
Appliance Cold Rolled Steel
Stainless steel and galvanized appliances are widely used in homes and businesses around the world. We work with appliance manufacturers to provide cold rolled, hot rolled, galvanized, color coated, coated and stainless steel for major appliances.
Our finishing capabilities include ring cutting, cut-to-length, pickling, tempering, stretch straightening, coating, painting and other processes that can be used to increase durability, prevent corrosion of materials and improve appearance. Whether you need to stock material or purchase specialized types of steel, we handle the logistics so you only have to deal with one purchase.
Steel Sheet, Blanks & Coil For Transportation
The transportation industry encompasses a wide range of different vehicles and modes of transportation that get from point A to point B. This can include public transportation, trains, buses, airplanes, semi-trailer trucks, and more. Hunter Special Steel is an experienced supplier that has been supplying steel to the transportation industry for many years, ensuring that we have exactly what you need. Contact us today.
Steel Plates for Transportation
A wide range of different processes, grades and shapes of steel are available for the transportation industry. We can provide the following services:
Types of steel processed
Hot rolled pickled and oiled coils
Cold rolled coils
Hot-dip galvanized
Steel grades
Duplex
Duplex
Advanced High Strength Steels
Ultra High Strength Steels
Multi-Phase
High Strength Low Alloy Steels
Shapes
Steel plate
Coil
Blanks
Fine Blanking
Configuration Blank
Automotive Steel Coil Supplier
As a supplier of automotive steel, Hunter Special Steel offers a wide range of applications and products for the transportation and automotive markets. One of our areas of specialization is rigid products and blanks with controlled profiles for the automotive industry, allowing our customers to reduce the number of adjustments made during production while increasing productivity and operational efficiency. From school buses to trains, our customers require consistent finite gauge tolerances, not only from top to edge, but also from head to tail.
Automotive Steel Specifications
Hunter Special Steel is a specialized supplier of steel in a variety of sizes and types for the automotive industry.
Hot rolled select and oiled coils and billets
Cold rolled coils and blanks
Hot-dipped galvanized coils and billets
Coated steel
High strength steel
We also offer slitting and cut-to-length services for automotive applications.
Automotive Applications
Automotive Steel is used in a variety of different applications in the automotive industry. Such applications include consumer and commercial vehicles, school buses, trains, heavy and light trucks, cars and airplanes.
More specific applications include:
Exposed bumpers
Transmission and safety components
Critical engine applications
Engine bearings
Pulleys
Valve covers
Truck and seat frames
Chassis and wheel systems
Surface critical drawing applications
Pulleys
Pressure vessels
Airbag components
White color
1. Application
*Sanitary sealing around sinks, tubs, urinals and wirlpools
*Sealing for kitchen, skirting lines, furniture, ceramic tiles.
*Sealing for windows and doors with anti-mildew requirements.
2. Product features
*One component, excellent extrusion, easy to use
*Excellent mildew resistence standard
*Ecofriendly with low VOCs
*Resists staining, spotting, and color changes
3. Packing specification
*Cartridge: 240ml/260ml/280ml/300ml
*Sausage: 590ml
1. Application
* Suitable for construction&home decoration
*Sealing for window frames and glazing, architraves, etc.
*Applicable to fish tank sealing
2. Product Features
*One component, excellent extrusion.
*No-sag, ready to use
*Good adhesion to a broad substrate range such as glass, upvc, etc.
3. Packing Specification
Cartridge: 240ml, 260ml, 280ml, 300ml
Upset Parallel Threaded Rebar Coupler
100% bar break through tensile test.
Material of the rebar coupler is No.45 steel.
High precision thread, full thread type, no false thread.
1. Wide range of application, no weldability requirements for rebar, suitable for �?12 ~ 50mm HRB400, HRB500 same diameter or reducing diameter steel bar connection in any direction;
2. Convenient construction, fast connection speed, and the on-site connection and assembly operations take up a short time;
3. Environmentally friendly construction, no noise and pollution on site, safe and reliable.
Cold Rolled Carbon Steel Sheets
Cold rolled carbon steel is hot rolled steel that has been further processed. Hot-rolled steel is cooled (usually to or below its recrystallization point), then annealed and re-rolled at room temperature to obtain more accurate thicknesses, higher strength and hardness, and better surface quality. In addition to changing mechanical properties, the cold rolling process produces steel with tighter tolerances and higher dimensional accuracy than hot rolled steel. It also tends to be better suited to lighter gauges and is better suited to applications that require a more visually appealing surface finish.
Types of Cold Rolled Carbon Steel
Cold rolled carbon steel is available in a variety of carbon content levels:
Low carbon steel - also known as soft steel, contains less than 0.3% carbon. It is highly formable, making it effective for applications that require a lot of bending and forming.
Medium Carbon Steel - Carbon content ranges from 0.3% to 0.6%, which makes it stronger and more durable for applications such as automotive manufacturing.
High-carbon steel - contains 0.61% to 1.5% carbon, which significantly alters its physical properties. With higher carbon content, the steel becomes stronger and harder than mild steel; however, this material is less ductile.
Comparison of using laps and rebar coupler:
1. Reduce or eliminate some of the costs of lap splicing by using rebar coupler.
2. The use of laps can be time-consuming in terms of desigh and installation and the increased amount of rebar creats congestion within the concrete
The Characteristics of the Usage
Standard Model
used in the occasion for connecting the steel bar in normal situation
Different Diameter Model
used for connecting the steel bar in different diameters
Flared Model
used for the steel bar which was hard to match
Positive And Negative Screw Thread Model
Used in the occasion when the steel bar in the two sides both can not be turned but the lengths can be adjusted.
Locking Nut Model
Used when the steel bar can not be turned, then it turns the splicing coupler to join the steel bar and then lock the splicing coupler with the locking nut.
Application:
Suitable for all kinds of glass curtain wall, sunroom, high-grade doors and windows, weather-resistant seal. Also suitable for sealing and bonding of solar cell installations.
Features:
1) One-component, excellent extrusion.
2) No sagging, easy for construction.
3) Good adhesion to large substrate.
4) Good weather resistance and UV resistance.
5) Implementing standard GB/T 14683-2017, 25HM
Application:
Suitable for sealing of various installations of windows and doors.
Features:
1) One-component, excellent extrusion.
2) No sagging, easy for construction.
3) Good adhesion to large substrate.
4) Good weather resistance.
5) Implementing standard GB/T 14683-2017, 25HM
PRODUCT SUMMARY
This Karcher Electric Cold Water HD Series Pressure Washer easily converts from a cart to a skid with the skid feet accessory (not included) for maximum cleaning versatility and durability. This model features a commercial-duty Leuco crankcase pump (backed by a 7-year pump warranty) and a corrosion-resistant aluminum frame with flat-free tires. The low-profile handle and compact footprint makes it easy to maneuver. Bypass loop provides additional pump protection.
WHAT'S INCLUDED
(1) Electric pressure washer
(1) 50ft. high-pressure hose
(1) Spray gun
(1) Lance
(1) Quick-connect nozzle
FEATURES + BENEFITS
Insulated, fatigue-free, spring-loaded trigger gun with side-grip spray wand makes for easy point-and-shoot cleaning action
Four quick-couple nozzles made of hardened stainless steel and color-coded for easy selection of spray pattern: 15�°, 25�°, 40�° and detergent
Durable VRT3 unloader with bypass loop diverts water flow when trigger gun is not activated
KEY SPECS
Item# 104509
Brand Karcher
Manufacturer's Warranty 1 year Limited Warranty
Ship Weight 180.4 lbs
Pressure (PSI) 1,000
Flow (GPM) 3.0
Motor Baldor
Horsepower 2.0
Volts 120
Amps 20
Pump Karcher KF
Drive Style Direct
Gun M407
Nozzle Type Quick-connect
Hose 50 ft. high pressure
Coupler Size (in.) 3/8
Cart Aluminum
Power Cord (ft.) 36
Max. Inlet Water Temp (�°F) 140
Chemical Injector Yes
Adjustable Pressure Yes
Pump Oil Type SAE 15W-40
Pump Oil Included Yes
Dimensions L x W x H (in.) 41 x 22 x 25
CAM SPRAY ELECTRIC COLD WATER PRESSURE WASHER
The Cam Spray Electric Cold Water Pressure Washer is built for performance and convenience with an industrial 3-plunger pump featuring stainless valves and ceramic plungers. This high-quality unit includes an industrial motor to deliver long-lasting cleaning performance. The included Multi-Reg variable pattern nozzle rotates to change from a 0�° stream to a 40�° flat pattern and also slides forward for low-pressure chemical application.
WHAT'S INCLUDED
(1) Electric cold water pressure washer
(1) 25ft. pressure hose
(1) Trigger gun
(1) Wand
(1) Variable nozzle
FEATURES + BENEFITS
Rotationally molded, high-density polyethylene cart provides a rigid and durable enclosure for the pump and motor
Convenient onboard storage for wand and 1-gal. jug of detergent
KEY SPECS
Item# 104208
Brand CAMSpray
Manufacturer's Warranty 1 year Limited Warranty
Ship Weight 125.0 lbs
Pressure (PSI) 1,000
Flow (GPM) 2.0
Motor Industrial grade
Horsepower 1.5
Volts 120
Amps 15
Pump 3-plunger
Drive Style Direct
Gun Front entry trigger
Nozzle Type Multireg variable pattern
Orifice Size 4
Hose 25 ft.
Coupler Size (in.) 22mm
Cart High-density polyethylene
Power Cord (ft.) 35
Max. Inlet Water Temp (F) 140
Max. Output Water Temp (F) 140
Chemical Injector Downstream low pressure
Adjustable Pressure Yes
Pump Oil Type SAE30
Pump Oil Included Yes
Thermal Protector Yes
Dimensions L x W x H (in.) 26 x 17 x 34
Product Weight 125
4081 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
