Offering long reach with an advanced feature-set and optical design, the M.Zuiko Digital ED 40-150mm f/2.8 PRO from Olympus is a versatile 80-300mm equivalent telephoto zoom for Micro Four Thirds mirrorless cameras. As part of the PRO series of advanced lenses, this zoom distinguishes itself with a bright f/2.8 constant maximum aperture for consistent illumination throughout the zoom range to suit working in a variety of lighting conditions. Its optical design makes use of a series of aspherical and low dispersion glass elements to suppress chromatic and spherical aberrations for notable sharpness and clarity, and a ZERO coating is also used to reduce flare and ghosting for high contrast, color-accurate imaging. Complementing the optics, a dual VCM autofocus system offers fast and near-silent focusing performance to suit both stills and movie recording applications. A manual focus clutch permits quick switching between AF and MF, and a programmable L-Fn button avails lens-based control over shooting settings. The lens is also weather-sealed for working in trying conditions, and a removable rotating tripod collar is included for improved balance and support when working atop a tripod or monopod.
Olympus OM-D E-M5 Mark III is a Micro Four Thirds mirrorless camera with an abundance of speed, precision, and versatility. Featuring a 20.4MP MOS sensor and a TruePic VIII image processor, the E-M5 Mark III offers quick continuous shooting up to 10 fps with a mechanical shutter, up to 30 fps shooting with an electronic shutter, and DCI and UHD 4K video recording. The sensor and processor combination also affords a sensitivity range up to ISO 25600 while a sophisticated 5-axis sensor-shift image stabilization system compensates for up to 6.5 stops of camera shake for sharper handheld shooting. Complementing the imaging specs, the sensor's design also incorporates 121 phase-detection points, all of which are cross-type, along with 121 contrast-detection areas for fast and precise focusing and subject tracking performance. Despite all of its performance-oriented attributes, the E-M5 Mark III manages to retain a sleek design, which is also weather-sealed for use in trying weather conditions. A high-resolution 2.36m-dot 0.67x-magnification OLED viewfinder is featured along with a 3.0" 1.04m-dot touchscreen LCD, which sports a vari-angle design to suit working from high, low, and front-facing angles. Additionally, built-in Wi-Fi and Bluetooth enable wireless transferring and remote camera control from linked mobile devices.
Panasonic has taken a different approach to camera development with the stills-focused DC-G9 Micro Four Thirds Mirrorless Camera, which has a variety of newly developed functions and features that will appeal to photographers. Central to the imaging process is the combination of a 20.3MP Live MOS sensor and the latest Venus Engine processor, enabling the capture of sharp images and video with sensitivities ranging up to ISO 25600. Extremely fast speeds are also made available with up to 60 fps continuous shooting with the electronic shutter function. If you want to shoot video along with stills the G9 is very accommodating, offering UHD 4K at up to 60p. This improved speed is seen in many different aspects, including an enhanced Depth-from-Defocus autofocus system with 225 areas for fast, precise focusing across the frame. A rear joystick has been implemented as well for intuitive control over the current focus point. Another benefit of boosted processing is the inclusion of 6K PHOTO at 30 fps and 4K PHOTO at up to 60 fps, allowing users to capture 18MP or 8MP images, respectively, at exceptional frame rates. Beyond speed, the 5-axis sensor stabilization system supports Dual I.S. 2.0 and can compensate for up to six stops of camera shake. And a significant addition made possible with this new system is a multi-shot mode that captures eight separate images and compiles them into a single 80MP raw image.
Celebrating the 50th anniversary of the Apollo 11 moon landing on July 20th, 1969, the Hasselblad 907X Special Edition is a highly modular medium format camera system recalling the famous Hasselblad cameras from the historic lunar mission. This limited edition camera comprises the matched CFV II 50C digital back and 907X camera body, both finished in matte black, and the body has been accentuated with the text "On the Moon Since 1969." The 907X has the distinction of being the smallest medium format camera Hasselblad has ever created, measuring just over an inch thick, as well as the lightest, at 7.3 oz. Recalling the form of the famed 500-series V-system cameras, though, this simple camera body mainly serves as the interface between the V interface of the CFV II 50C digital back and the X-mount for working with XCD lenses or adapted lenses from other mounts. The CFV II 50C is an updated and refined digital back featuring a classic V-system interface for use on the included 907X as well as virtually any Hasselblad V camera from 1957 onward. Designed with the classic A12 and A16 film backs in mind, this digital back has been outfitted with versatile digital capabilities, revolving around a 43.8 x 32.9mm 50MP CMOS sensor, which yields high-resolution imagery with a wide 14-stop dynamic range, 16-bit color depth, and an ISO 100-25600 sensitivity range. This sensor utilizes Hasselblad's Natural Color Solution, too, which delivers realistic, pleasing color tones for great consistency and smooth tonal transitions. The back's design also incorporates a rear 3.0" 920k-dot tilting touchscreen LCD, to recall the experience of working with a waist-level finder, and it now houses the rechargeable lithium-ion battery internally for a sleeker overall profile. Additionally, built-in Wi-Fi permits wireless remote control and file transferring via Phocus Mobile 2 and an integrated GPS module enables recording location data for geotagging.
FUJIFILM X-Pro3 is a unique mirrorless camera characterized by its distinct viewfinder design, a hidden LCD screen, and its stylish, rangefinder-inspired design with a dura silver finish. In terms of imaging, the X-Pro3 features the APS-C-format 26.1MP X-Trans CMOS 4 sensor along with the X-Processor 4, which enables high-resolution stills shooting and DCI/UHD 4K video recording. The sensor and processor also enable an ISO 160-12800 sensitivity range for working in a variety of lighting conditions. Besides its imaging capabilities, the X-Pro3's strengths lie in its sophisticated design, which includes the Hybrid Multi Viewfinder that combines both an optical viewfinder and a 3.69m-dot OLED electronic viewfinder. These two viewing means can be instantly switched with the dedicated lever on the front of the camera and let you choose between the simplicity and speed of an OVF versus the accuracy and versatility of an EVF. The X-Pro3 also sees an updated rear LCD design, with a hidden 180�° tilting touchscreen that has a 1.62m-dot resolution. The unique fold-down screen design keeps the larger 3.0" screen hidden against the body when not in use and a secondary smaller settings display is available while shooting. This design enables a simpler, more streamlined and unencumbered shooting method that helps to keep you in the moment. Additionally, the X-Pro3 also sports built-in Wi-Fi and Bluetooth for wireless sharing and remote control and dual SD memory card slots are featured for file saving flexibility.
Canon has released the 5D Mark IV DSLR which is an outstanding still photography option and an able 4K-capable video machine. This multimedia maven offers a newly developed 30.4MP full-frame CMOS sensor paired with the DIGIC 6+ image processor in order to balance fine detail and resolution with low-light performance and sensitivity. It is able to work within a native range of ISO 100-32000, which can then be expanded to an impressive ISO 50-102400, for sharp, low-noise images in a variety of conditions. Along with these improvements to image quality, users will enjoy a performance boost across the board with an enhanced AF system, built-in Wi-Fi, NFC, and GPS, and much more. In order to deliver detailed images quickly and effectively the 5D Mark IV leverages the power of the DIGIC 6+ image processor, which can handle up to 7 frames per second during continuous shooting. It also uses a 150,000-pixel RGB+IR metering sensor to evaluate the scene and subjects for accurate exposures under a variety of different lighting conditions. An improved 61-point High Density Reticular AF furthers the camera's speed by tracking and locking onto subjects quickly and accurately for tack sharp photos. A new AF area select button is now available as well for near immediate access to this setting. Video benefits from the addition of Dual Pixel CMOS AF and Movie Servo AF to smoothly rack focus during a shot. Shooters can even make use of the 3.2" 1.62m-dot touchscreen LCD to simply tap to adjust the focus point. Furthermore, now that the camera has DCI 4K (4096 x 2160) video recording at up to 30 fps, users can snag 8.8MP stills from the video for an even faster capture option. Tied into the Dual Pixel sensor architecture is a brand new feature for Canon: Dual Pixel RAW, which allows for fine tuning of certain image parameters, including bokeh shift and focus micro adjustment, after the image is taken.
Imaging Lens Mount Nikon F Camera Format Full-Frame (1x Crop Factor) Pixels Actual: 24.92 Megapixel Effective: 24.5 Megapixel Maximum Resolution 6048 x 4024 Aspect Ratio 1:1, 3:2, 16:9 Sensor Type CMOS Sensor Size 35.9 x 23.9 mm Image File Format JPEG, Raw Bit Depth 14-Bit Image Stabilization None Exposure Control ISO Sensitivity Auto, 100 to 51200 (Extended: 50 to 204800) Shutter Speed Electronic Front Curtain Shutter 1/8000 to 30 Seconds 1/8000 to 900 Seconds Bulb Mode Time Mode Metering Method Center-Weighted Average, Highlight Weighted, Matrix, Spot Exposure Modes Aperture Priority, Manual, Program, Shutter Priority Exposure Compensation -5 to +5 EV (1/3, 1/2 EV Steps) Metering Range -3 to 20 EV White Balance Auto, Cloudy, Color Temperature, Daylight, Flash, Fluorescent, Incandescent, Preset Manual, Shade Continuous Shooting Up to 12 fps at 24.5 MP Up to 7 fps at 24.5 MP Interval Recording Yes Self-Timer 2/5/10/20-Second Delay Mirror Lock-Up Yes Video Recording Modes MOV/H.264 UHD 4K (3840 x 2160) at 23.976p/25p/29.97p Full HD (1920 x 1080) at 23.976p/25p/29.97p/50p/59.94p/100p/119.88p External Recording Modes 10-Bit UHD 4K (3840 x 2160) Full HD (1920 x 1080) Recording Limit Up to 29 Minutes, 59 Seconds Video Encoding NTSC/PAL Audio Recording Built-In Microphone (Stereo) External Microphone Input (Stereo) Audio File Format AAC, Linear PCM (Stereo) Focus Focus Type Auto and Manual Focus Focus Mode Continuous-Servo AF (C), Full-Time Servo (F), Manual Focus (M), Single-Servo AF (S) Autofocus Points Phase Detection: 51 (15 Cross-Type) Phase Detection: 273 Autofocus Sensitivity -3 to +19 EV Viewfinder and Monitor Viewfinder Type Optical (Pentaprism) Viewfinder Eye Point 21 mm Viewfinder Coverage 100% Viewfinder Magnification Approx. 0.7x Diopter Adjustment -3 to +1 Monitor Size 3.2" Monitor Resolution 2,359,000 Dot Monitor Type Tilting Touchscreen LCD Flash Built-In Flash No Flash Modes First-Curtain Sync, Off, Rear Sync, Red-Eye Reduction, Slow Sync, Slow Sync/Red-Eye Reduction Maximum Sync Speed 1/200 Second Flash Compensation -3 to +1 EV (1/3, 1/2, 1 EV Steps) Dedicated Flash System iTTL External Flash Connection Hot Shoe Interface Memory Card Slot Dual Slot: SD/SDHC/SDXC (UHS-II) Connectivity USB Type-C (USB 3.1), HDMI C (Mini), 3.5mm Headphone, 3.5mm Microphone Wireless Bluetooth Wi-Fi GPS No Environmental Operating Temperature 32 to 104�°F / 0 to 40�°C Physical Battery 1 x EN-EL15b Rechargeable Lithium-Ion (Approx. 2260 Shots) Dimensions (W x H x D) 5.65 x 4.55 x 2.99" / 143.5 x 115.5 x 76 mm Weight 1.85 lb / 840 g
We are an IT Asset Disposal, Data Center Buyback, and Remarketing company, We Buy any volume of used IT products which include Servers, Networking, Storage, Desktops, Laptops, LCDs, HDDS, Apple products and any Excess Stock Inventory. For more detail, Please contact at www.maxicom.sg
Nitrile Gloves, N95 and 3 Ply Face Masks, Sanitizer, Pandemic Supplies, Computer Hardware, Peripherals, Supplies and Accessories..
Wisdom international trade singapore company, marine diesel engine, gearbox, diesel engine spare parts, engine parts, valves, marine parts, metal hoses, expansion joints, solar panels led display board.
Five Laser developed innovative laser marking machine, which is no need connect to the computer. It can do marking from the mobile App or laptop by WIFI,which means that there is no need to equipe a indepedent computer for our laser marking machine, especially better for portable fiber laser marker and handheld type laser marking machine. Also it will save the computer cost and make the laser marking more freedom. The mobile App can make simple designs such as serial number, text, barcode. Also it can import vector files such graphics, pictures. The marked file can be saved on the marking controller, next time it can be opened from the mobile App directly. There is no need to connect the laser marker to computer by USB cable any more. Inside machine already have build-in WIFI on marking controller, the marking can be out puted from the mobile marking App or laptop software through WIFI directly. Fiber laser marking machine is very suitable for stainless steel, aluminum alloy, titanium alloy and other metals marking. Also part of engineering plastic can be marked such as computer keyboard, mobile charge housing, PVC pipes.
Continuous fiber laser welding machine R&D and produced by Five Laser Faster welding speed, better welding performance, lower operating cost Handheld fiber laser welder is better choice for welding The efficiency of continuous fiber laser welding is increased by 2-10 times, which can save welding workers and polish worker. Inexperienced operators can do the job within 1 hour, and they can learn immediately No professional welder? Fiber laser welding can still be beautiful Five Laser adopts dual-scanning motor welding head for handheld fiber laser welder, our system can get more laser working mode, compared with the single motor welding head models in the market, the welding is firmer and the welding seam is more beautiful In welding equipment market, argon-arc welder and YAG laser welding machine are popular, and argon-arc welder is most popular welding equipment in the world because of its cheap cost. But YAG laser welding machine used more and more in the past years because of its high speed and high quality welding performance, but its obvious shortcomings is the electricity consumption is higher. Right now a new technology---Handheld fiber laser welding machine is attractive with welding industry The fiber laser welding machine have abvious advantage in welding quality such as low thermal input, low workpiece deformation & undercut, smooth welding seam and low requirement in post-processing (no need extra polish after welding) In operation, the handheld fiber laser welding machine can get fastest welding speed than argon-arc welder and YAG laser welder, also operator can learn to handle the fiber laser welding machine very easy, commonly user can do welding by it within one day operation, no need professional welding worker In Environmenta protection and safety, the argon-arc welder have high harm on operator because of strong arc ultraviolet rays, also the big welding spatter is harm on Envirometal pollution Because of faster much welding speed and beautiful welding seam for handheld fiber laser welder, so the factory or workshop can reduce professional welding worker and polish worker. Right now the professional welding worker labor cost is very high in the market, but there is no much high requirement for operator for Handheld fiber laser welder because of easy learning and easy operation Because the electro-optical conversion efficiency for YAG laser is only 3%, but 40% for fiber laser. So the electricity consumption for YAG laser welder is 5-6 times higher than fiber laser welder under similar laser power output For running cost, fiber laser welder have large advantage compare to YAG laser welder Right now the handheld fiber laser welding machine have 1000w, 1500w, 2000w for option. The 500w handheld fiber aser welding machine is getting less and less in the market, because the buying cost for 500w is closed with 1000watt. The fiber laser source for welding have Raycus, RECI, Max brand for option
CFL---MEGAMAN 3U123-E27-2700K TUBULAR 23W WARM WHITE--TUBULAR 23W WARM WHITE -- CCT-2700K
LED ---- MEGAMAN ER045055-LNv00-WF-4000K LED GLASS MR16 5.5W COOL WHITE--- MEGAMAN ER045055-LNv00-WF-4000K LED GLASS MR16 5.5W COOL WHITE ---- LED GLASS MR16 5.5W COOL WHITE---- Wattage -5.5 Lumen-400 CCT-4000K
Integrated Downlight-- MEGAMAN FDM70200v0-3000K-WH SIENALITE LED DOWNLIGHT 5" 13W WW---- INTEGRATED 5 INCH WARM--- Wattage -13 Lumen -1000 CCT-3000K
Integrated Floodlight MEGAMAN FFL70200V0/BK-6500K TOTT OUTDOOR FLOODLIGHT 24W DL TOTT OUTDOOR IP65 24W DL Wattage - 24 Lumen - 2300 CCT - 6500K
Series -MR16 Bar Code -4892657098679 Megaman Model - ER045055-LNv00-WF-4000K Wattage - 5.5 Lumen -400 CCT - 4000K MEGAMAN ER045055-LNv00-WF-4000K LED GLASS MR16 5.5W COOL WHITE LED GLASS MR16 5.5W COOL WHITE
It provides mobile entertainers with a compact and portable solution for creating and controlling UV-infused color washes with bright and smooth color mixing, for venue uplighting, dancefloor color washing, and more. Lightweight at 3 lb, the Mega Par Profile Plus PAR has a 30�° beam angle, five operational modes, 48 built-in light shows, and 64 color macros. It can be controlled via five DMX channels. The DMX Operator is a universal DMX controller that provides 192 channels of DMX control, with six sets of chases, 8 individual faders, and one channel fader. Connect the controller to the fixtures by daisy-chaining them using the included eight DMX cables. The two TS-6 tripod stands allow you to mount all eight fixtures on their T-bars, which extend up to 9'. The stands are easy to set up / take down, and collapse easily for transport. American DJ Mega Flat Pak 8 Plus 8x Mega Par Profile Plus LED Pars, 7x DMX Cable, and Bag The Mega Flat Pak 8 Plus from American DJ combines eight Mega Par Profile Plus LED fixtures with seven 6'/2m DMX cables and a soft carrying bag, to provide the primary components of a mobile lighting rig with protection from the rigors of on-the-road wear and tear. The Mega Par fixture is a compact, low-profile par designed for uplighting and stage lighting. This 2-in-1 fixture offers RGB color mixing plus UV black light, making it a multiuse wash fixture. And with 32 built-in light shows and 64 color macros, the Mega Par Profile Plus is an ideal solution for multiple venues. This intelligently designed light can sit directly on the ground or inside a truss without the hanging bracket because the power and DMX inputs and outputs are located on the side of the fixture, not on the rear. The Mega Par Profile Plus has a 30-degree beam angle, 5 operational modes (including DMX Controlled, Sound Active, and Auto Run), and has 5 DMX Channel modes for a variety of programming options. Users can also use the ADJ LED RC2 wireless remote, which is sold separately, to control the Mega Par Profile Plus.
Flourescent and LED 2ft and 4ft Also available in weatherproof with or without tube Individual or bulk pack
F3836 LTE/WCDMA WIFI ROUTER is a kind of cellular terminal device that provides large data transfer function by public LTE/WCDMA network. It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration. It has been widely used on M2M fields, such as self-service terminal industry, intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.
