MATERIAL : LDPE/LLDPE repro pellet film grade CATEGORY : LDPE/LLDPE TYPE : repro pellet GRADE : film grade SPECIFICATION : LDPE repro pellet,made from clean PE roll and film.Japan origin.Best for film maker.MFI 1 and MFI 4 , 1 full container (25 tons) for each grade. datasheet included Origin : JP - Tokyo LOADING WEIGHT: 25 Ton FAS (USD/Ton) : 1200$ Packaging : Jumbo Bag Est. Shipping Time: 15, 30, 45 days
Leica HDS ScanStation C10 3D laser scanner complete set manufacture: 2014 Condition: demo used only and still in perfect condition. New Calibration and Fresh 1 year manufacture warranty..!! Leica Cyclone software license for Scan-Laptop installed, ready to work FULL!! Includes: - 1X Leica ScanStation C10 with tribrach - 1X Leica hard case - 1X Battery charger - 4X batteries - 8X targets with 3 soft cases - 8X rods with tripods and bags. - 1X Padded backpack also included. Backpack makes safe transport to work locations much easier than using hard case. - 1X Windy 31 Wireless Router - for connection to iPad or iPhone - 1X Cyclone 7.1 CD - 1X Reshaper CD complete package
New LEICA GS15 GNSS RTK Base and Rover CS15 Includes: - 2X 771503 LEICA GS15 Performance Receiver - 2X 767805 LOP2 GLONASS Option - 4X 772806 GEB212 Battery - 1X 810855 CS15 Field Controller - 1X 767874 CBC01 Lemo Connector Module with Power Jack - 1X 767909 SmartWorx Viva License Key - 1X 767879 GHT62 Pole Holder Base Plate - 1X 767880 GHT63 Clamp Arrangement - 1X 752292 GLS30 GNSS Telescopic Pole - 1X 799187 GKL341 Multi-bay Battery Charger - 1X 767856 MSD1000 Industrial Grade SD Memory Card 1GB - 2X 781646 SLR5 Satelline M3 TR1 403-470 Mhz RX/TX Radio - RTK Receive & Transmit UHF Radio Module - 2X 667243 GAT2 435MHz-470MHz Antenna - 1X 785703 GKL32 Battery Charger - 2X 767790 GAD108 Arm to Mount External UHF/GSM Antenna to GS14/GS15 - 1X 770715 GRT247 Carrier - 1X 399244 GST05 Wooden Tripod - 1X 798181 GDF112-1 Tribrach with Optical Plummet - 1X 667244 GZS4-1 Height Hook - 1X 758469 GEV219 1.8m Power Cable Connects External Battery GEB171 - 1X 727367 GEB171 External Battery - 1X 767827 GVP641 Hard Container - 1X 6003686 1 year Viva GNSS (GS10/14/15/25) Basic CCP - 1X 6003680 1 year Viva GNSS (GS10/14/15/25+CS+SW) Basic CCP complete package
2013 Trimble TX5 3D Laser scanner Manufacture: 2013 Condition: demo used only, excellent condition. New Calibration, and still under manufacture warranty until september 2015. Includes: - 1x Trimble TX5 3D Laser Scanner + TX5 Kit (P/N S-6-S-120-TX) - 1x PowerBlock Battery - 1x Laser Goggles and Hard Case - 1x Power Supply - 1x SanDisk - Ultra 32GB Secure Digital High Capacity (SDHC) UHS-I Class 10 Memory Card - 1x Multislot Card Reader CF/SD/ MMC/MSPRO/XD Superspeed USB 3.0 (P/N SDC0001) - 1x SCENE Software - First Licenese - hard Lock USB Dongle - Single User. - 1x Transportation case - Trimble TX5 Kit complete package
Trimble GCS900 MS992 CB460 3D Automatics Machine Control dual GPS Glonass SNR 920 The MS992 contains an integrated GPS + GNSS receiver, antenna, and isolation system all in a single, durable housing. It uses the advanced Trimble RTK engine for faster initialization times when satellite lock is lost and enhanced performance near obstructions. manufacture: 2012 Condition: used, excellent condition MS992's with GPS + GLONASS (mint unit like new) Trimble SNR920 Radio with Wifi It has the latest firmware and programs installed. Includes: - 2X Trimble MS992 dual GPS GLONASS Version 4.45 app and Version 4.25 loader. - 1X Trimble CB460 loaded with Accugrade 12.61 with 3D Automatic Grader / Dozer - 1X Trimble SNR 920 - 900mhz radio with 2.4ghz (dual band radio) - 2X Trimble coil cables (New) - 1X Hard Carrying case complete package
Descriptions of products:, , the bs-1880 is an omnidirectional laser barcode scanner with streamline and compact appearance design. And this barcode scanner with hand-free scanning, is a high performance input device, and workable under the auto-trigger and stand detection, it can deliver the fast and accurate scanning, and speed up the processing to reduce the waiting time at check counter, and is very suitable as peripheral input device for use in the point of sale system. Here are specifications for this model as below:, , , basic specifications:, , , (1) scanner type 20-line omnidirectional scanning, , (2) light source 650 nm visible laser diode, , (3) scan rate 1500 scans per second, , (4) reading distance 0 to 20 cm (depends on bar width of barcode), , (5) decode capability Ean-8, ean-13, upc-a, upc-e, code 39, code 93, , code 128, ean128, codabar, industrial 2 of 5, msi, , interleave 2 of 5, matrix 2 of 5 and so on., , , (6) interface Ps/2 keyboard wedge or usb ï? , , (7) trigger mode Auto-trigger and stand detection, , (8) min. Resolution 0.1 mm/4 mil, , (9) print contrast ratio Min. 30%, , , product safety standard:, en55032 class b, fcc part 15 class b and rohs etc., , physical characteristics:, , (1) dimensions (w x d x h) 3.39 x 3.15 x 6.14 in, or 86 x 80 x 156 mm, , (2) weight 0.66 lb / 300 gm, , (3) power supply +5vdc/200ma (max.), , (4) color Cloud white/twilight black
Descriptions of products:, , The bs-1520 is a bidirectional laser barcode scanner with streamline and compact appearance design. And this barcode scanner is a high performance input device, and workable under the multiple modes of manual, auto-trigger and stand detection, it can deliver the fast and accurate scanning, and speed up the processing to reduce the waiting time at check counter, and is very suitable as peripheral input device for use in the point of sale system. Here are specifications for this model as below:, , basic specifications:, , (1) Scanner type Bi-directional scanning, (2) light source 650 nm visible laser diode, (3) scan rate 500 scans per second, (4) reading distance 3 to 15 cm (depends on bar width of barcode), (5) decode capability upc-a, code 93, code128, ucc/ean-128, , ean-8, ean-13, codabar, isbn, industrial 2 of 5, , code 39, standard 2 of 5, matrix 2 of 5 and so on., , (6) interface ps/2 keyboard wedge or usb, (7) trigger mode manual, auto-trigger and stand detection, (8) min. Resolution 0.076 mm or 3 mil, (9) print contrast ratio min. 30%, (10) drop specification 5 ft./1.5 m drops to concrete, , , product safety standard:, - en55032 class b, fcc part 15 class b and rohs etc., , physical characteristics:, , (1) dimensions (w x d x h) 2.6 x 5.9 x 2.1 in, or 67 x 150 x 54 mm, (2) weight 0.29 lb/ 130 gm, (3) power supply +5 vdc/100 ma (max.), (4) color Cloud white/twilight black