Origin: Mexcico Type: Preform Lump Category: PET Color: Natural Quantity: 130 Tons Loading weight: 22 Tons
LLDPE film about 50um thick
HDPE regrind & washed natural & white in separated big bags - All cold wash - IBC - MFI is between 0,1-0,4
Intrinsic Viscosity (IV): 0.70 - 0.85 dL/g
Origin: Japan Category: HDPE Type: Pellets Color: Black Quantity: 150 Tons Loading weight: 25 - 26.4 Tons Price FOB: 890 USD/ Ton
Origin: Korea Category: PET Type: Washed Bottle Flakes Color: Clear Loading weight: 20 Tons Quantity: 1500 Tons
Origin: Japan Category: PP Type: Tray press into bales Loading weight: 20 Tons Quantity: 20 Tons
PP trays White pressed into bales Post industrial Subject to unsold
HDPE pellets repro pellets - black/gray color made from bottles, usually used for extrusion molding MI: 0.3 - Mesh filter: 80 Subject to unsold
IZOD: 15,275 MFR: 9,0615 Flexural rigidity: 70,82 Mpa tendency for a material to resist bending. Flexural modulus: 2400.30 Mpa Tensile strength at break: 48,50 Mpa Elongation at break: 19,3%
Pet fines , hot washed, Less than 300 ppm pvc, % small label & caps Loading weight 42,000/40'HC On going shpt
ABS natural Sheet from USA origin, pure ABS, no GF or FR 2loads are available Subject to unsold
POM and PA6 Casting grade 3 loads are available US origin Subject to unsold
Mixed color. From car lights.
Grade : mixed around K 67-68 From PVC producer. Around 30% moisture. No CaCO3
rLDPE repro Yellow pellets from post-consumer & post-industrial films. The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin. r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion Packing: 1000kg bulk bag Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5 Density 0.92 �± 0.015 Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility. rLDPE Yellow is typically extruded at a melt temperature around 190�?C (min 180�?C, max 240�?C). Mesh filters: 150 on the laser filter and 120 on the piston filters.
300 MT/month MFI: 20.934 g/10min Charpy impact strength notched: 0.593 kJ/m2 Tensile yeild stress: 33.47 MPa Tensile stress at break: 33.19 MPa Tensile strain at break: 2.37 % Yield: 51.756 MPa Modulus of elasticity: 2748.474 MPa Specific weight: 1.0306
260 MT/month MFI: 1.024 g/10min Charpy impact strength, notched 9.627 kJ/m2 Tensile yeild stress 15.024 MPa Tensile stress at break: 9.816 MPa Tensile strain at break: 410.730 % Yield: 15.096 MPa Modulus of elasticity: 578.601 MPa Specific weight: 0.9657
HDPE repro pellet white color, post consumer MFI: 0.25-0.30 Density 0.97 ( ISO: 1183) Test report as photo On going shpt
Moister 15-20% 22mt Capable of supplying 1-2 container(s) per month. Please note: loading goods: NET weight is the same Gross weight
