Chinese Silicone Suppliers and Manufacturers

1. Two models , both high adhesion , super soft 2, One is lower in hardness. 3, For pasting or printing on the hosiery .to anti-slip 4, not crack , bear many times wash . 5, China leading silicone manufacturer

ModelAppearanceViscosity (cps)Hardness Tensile strength (mpa)Tear strength (kn/m)Elongation (%)Mixing ratio (%)Operating time(h)Curing time(h) Hy-

Protection in the kitchen and on the dining room table. Easy-clean silicone pot holder. Heat resistance + 260°c/500°f Cross shaped design, very popular Foldable for saving storage space Nylon core coated with food grade silicone Anti-slip and decorate your kitchen Dishwasher safe. This expandable potholder / trivet is made of food grade silicone, unique designed trivet for resting pans and hot dishes. Silicone eliminates marking of surfaces and withstands heat to 500f.Great for variety of uses including as kitchen potholders, trivets. As its expanded size can be up to 22cm/ 8 2/3 inches, suitbale for most hot pan, pots and dishes. Cool pot holders is easy to clean and to store. After use, it folds neatly away for convenient storage. Table trivet, made from a high-quality silicone-nylon composite. Your logo can be printed on the central pod, we can make one solid color or any two tone color, can be any pms color.

FerroSilicon uses coke, quartz (or silica) as raw material,and is made by electric furnace.Ferrosilicon is widely used in the steel making,iron casting ,low-carbon ferroalloy producing. Application: 1.In the steel making field,Ferrosilicon is used as deoxidizer and alloying agent to precipit and diffuse deoxidation.Adding a certain amount silicon of fe-si to the steel can obviously improve the strength ,hardness ,elasticity and permeability of steel. 2.In the iron casting,ferrosilicon is used as ball mile agent and alloying agent, especially in the nodular iron casting,Adding ferrosilicon to cast iron,it can prevent the formation of carbide and promote the precipitation of graphite and the nodulizing.then the mechanical capacity can be the same of steel's. 3.High-silicon ferrosilicon can be used for the production of the low-carbon reductant in ferro alloy industry. 4.In addition, ferrosilicon powder can be used as a suspended phase in the mineral processing industry and coatings for welding electrodes in the electrode manufactruing.

GLPOLY thermal gap pad is applied in military equipment of 2019 National Day Parade. Why can GLPOLY stand out from competition and be applied in military equipment of 2019 National Day Parade? We are not boasting and flaut ourself, actually we had received certificate of merit from department concerned. The market is deluged with thermal gap pads, common customers can not distinguish high performance thermal pad from bad ones, because they dont have a special equipment to test and verify what the manufacturers marked. Many peers said that they can produce thermal gap pad with 15.0W/mK or 17.0W/mK of thermal conductivity, most of them falsified. We do not want to belittle peers, but after we tested their product, we got fake information often. one is falsification thermal conductivity, the other one is hgih thermal resistance. Bad performance causes distrust of customer in domestics brand. GLPOLY sticks to principle of integrity, we show customer what it is. The raw materials are imported from Germany and Japan, in order to enhance thermal performance, secondary processing will be proceeded by nanoscale grinder. It will reduce the particle size and increase specific surface area to decrease thermal resistance and improve thermal performance. No one else do it like this. Customer requested 5.0W/mK of thermal conductivity at least, when we learned application, we recommended thermal gap pads with 5.0W/mK and 6.0W/mK. Customer satisfied with parameters, but they prefered to test by themselves.

The set with oxygen reservoir bag,Silicone mask and oxygen tubing 100% medical level silucone Material,Latex free Additional accessories(PEEP Valve,B Valve ,etc.)and customized label are available All parts(excluding the oxygen tubing oxygen reservoir) are fully autoclave up to 134 Reusable for 20 times Size:Adult/Pediatric/Infant

The baking mould use food grade silicone material, non-toxic, tasteless, non-stick, leak proof, professional design and break through the ancient workmanship. There is 6 cavities, round shape. The product is used for home, restaurant, party, wedding, as a present etc. You can eat 6pcs delicious doughnuts once. The baking mould cavity quantity and product color can be customized according to customer's requirement. There is other shapes, for meeting customers' different demands. Size: 29.5*17.3*1.7(cm) Material: Full Silicone Product Net Weight: About 120g Quantity of cavity: 6pieces,it can be customized. Shape: Round Color: Brownish Red or Red, other colors can be customized. MOQ of product in stock: 100pcs, one carton MOQ of product customized: For example: color customization, MOQ is 1000pcs.

GLPOLY non-silicone thermal management materials contains no siloxane, help elinimate thermal material siloxane volatiles concerns under vacuumed situation. Facing siloxane volatile problem, lots of rivals will stress that low volatility will not affect performance of equipments. Actually, low siloxane volatility still brings customer big problem. GLPOLY silicone-free thermal materials can eliminate the concerns completely. Early this year, a customer engaged in vacuumed coating machine manufacturing, they needed a thermal gap pad with zero siloxane content. from data sheet, your thermal gap pad is complete non-silicone based, really customer asked seriously. Responsibly, only one supplier can promise this, it is GLPOLY, we are entirely responsible for what we promised. Customer said they had tested several brands of products before, even they came out in front on list, but the test result made me disappointed with a siloxane content of 500PPM at least. That didnt fit our application any more. Test result is the best reference. We recommended non-silicone thermal pad XK-P45 with a thermal conductivity of 4.5W/mK as customer requested a high performance material. â??thermal conductivity of the products which I had tested before never exceeded 3.0W/mK, are you sure you marked the right data?â?? â??we are the first manufacturer to develop non-silicone thermal management materials in China, we are confident that no one can catch with us even we stop going forward for three years in domestic market. Thermal performance test was easy, customer was satified with test result. Content can be tested by a spectrometer, simple and fast, no silicone content found. GLPOLY is the one qualified, weâ??ll prepare the work for bulk production. Its been half a year since business started, no complaint raised. GLPOLY had introduced a production line for silicone free thermal management materials only, avoiding silicone contamination in entire process. GLPOLY has partnered with Huwweu Marine, Data Telecom etc top brands in supplying non-silicone thermal management materials for several years. GLPOLY serve top ten clients in their industries with technologically advanced thermal solutions and quality service.

GLPOLY XK-G30 is high performance, low thermal impedance thermal gel with thermal conductivity of 3.0W/mK, it is ideal for AI equipment. Some suppliers marked for AI product thermal managementon specification and deceived customers with fake data, unfortunately, long-term reliability test will tell the truth. IDRIVERPLUS, a famous service robot company, the engineer consulted us about thermal management materials for autonomous sweeping vehicle. He stated definitelyfirstly, thermal conductivity is 3.0W/mK or greater, secondly, 10-year service life. Most of suppliers failed to satisfy these two requirements. But to GLPOLY, these were not barriers any more, we were not bragging, we showed customer the test of object. GLPOLY intrduced automated production lines, eliminating artificial error and keeping product consistent. It is cartridge package desiged for automated dispensing production, decreasing time consuming hand assembly, reducing labor cost and improving productivity. GLPOLY takes Bergquist, Chomerics Therm-A-GAP GEL30 and Laird Tflex 508 as benchmark, providing quality product and design flexibility.

Place of Origin: China Model Number: 75,72,65,45 Application: Steelmaking Shape: lump,powder Material: Si,Fe,C,Al,S,P Dimensions: 10-50MM,0-3MM Chemical Composition: Si,Fe,C,Al,S,P Payment term:T/T,L/C etc. Lead time: 15-30days Port of shipment: Xiamen,China Application: 1. Used as deoxidizer and allying agent in steel making, 3-5kg FeSi75 is needed for  1MT steel. 2. Used as inoculant and nodulizer in casting; 3. Used as reductant in producing other low carbon ferro alloys; 4. Used to produce metal Magnesium, 1.2 MT FeSi 75 is needed for 1MT Mg. Ferro Silicon is used as an essential alloy in the production of steel and cast iron. Ferro silicon is produced by reduction of  silica or sand with coke in the presence of iron. Ferro silicon is used as a source of silicon to reduce metals from their oxides and to deoxidize steel and other ferrous alloys. In the manufacture of  cast iron, ferro silicon is used for inoculation of the iron to accelerate graphitization.

It is generally supplierd with the type of FeSi 75,72,70,65 etc in the size of 10-50mm packing in the 1ton jumbo bags or jumbo bags with wooden pallet. Specification: FeSi 75-A: Si 75%Min,Al 1.5%Max,C 0.2%Max,S 0.02%Max,P 0.04%Max FeSi 75-B:Si 75%Min,Al 2.0%Max,C 0.2%Max,S 0.02%Max,P 0.04%Max Its apperance color is bright grey,the density is small, The smaller the silicon content, the higher the proportion . According to the content of silicon , this product can be divided into industrial FeSi and the ferro silicon with the Si content 75%,72%,65%. Function-ferro silicon: 1. Ferro silicon often used as deoxidizer in steelmaking. 2. Ferro silicon alloy can as one type of ferroalloy can be used as alloy elements join agent, widely used in low alloy steel, non-ferrous metal, bearing steel, heat-resistant steels and electrician silicon-steel. 3. FeSi is used as a reductant in ferro alloy(SiMn) production and chemical industry. 4. In iron industry, Ferro silicon briquette 75 can be used as inoculant and nodulizer.

The silicon metal include the types of 553,441,1101,2202 etc because of the differnet content of iron, aluminum and calcium, such as silicon metal 553, the content of iron is 0.5%max, aluminum 0.5% and calcium 0.3% , the silicon metal 1101 is with the content of iron 0.1%, aluminum 0.1% and calcium not more than 0.01%. Silicon metal is generally supplied in the size of 10-100mm, packing 1ton jumbo bags. Silicon metal is always be used as alloy additive for aluminum products or aluminum alloy, if any require please contactc us.

1 High thermal conductivity to 12W/m*K, 1~6W is most common use 2 Low thermal impedance 3 Min 0.1mm thickness 4 Extrem low hardness to 5shore C 5 Extremly low density to 1.2g/cm 6 Approved supplier of Google, Oppo, Vivo

Material: 100% virginal silicone rubber Quality: Food Grade Size: 2mm x 4mm, 4mm x 6mm, 4mm x 7mm, 5mm x 8mm, 6mm x 9mm, 5mm x 9mm, 8mm x 12mm, 33mm x 45mm, etc Package: cartons

Silicone-free thermal gel, GLPOLY Silicone-free thermal gel contains no silicone, everyone else can not make it in China. We dont want to scare you or flaunt GLPOLY ourself, that is what it is. Many customers are deceived by peers statement of non-silicone. For instance, some peers pursuaded customers to buy non-silicone thermal gel(thermal gap filler) and promise that no silicone contained. Actually, customers can not find problem in two or three months because the siloxane volatiles is not noticeable yet. Problems will come out as time goes, such as atomizing the optical windows or causing broken circuit. GLPOLY non-silicone thermal gel does not contain silicone, because raw material is isolated from silicone content from the origin. Non-silicone raw materials are imported from Germany and Japan. Why can not other manufacturers produce non-silicone thermal gel? Firstly, the raw materials should be isolated, whether in transport or storage. Secondly, production must be isolated too, a silicone product production line never be used for a silicone-free product. because there is always some remain that will pollute non-silicone materials. GLPOLY introduced a special facility to produce silicone-free thermal gel, it is not opened to other production. Most of silicone-free thermal gel/thermal paste is acrylic based, it is different from GLPOLY non-silicone thermal gel which is made from Polyolefin Copolymer. GLPOLY non-silicone thermal gel provides low hardness, low thermal resistance and interface conformability, optimizing heat transfer. One of our UK customer design a thermal silicone gel for LED light. At the beginning, it porforms well, no oil leakage no volatiles. But two months later, there is siloxane volatiles covering the optics. A silicone free solution is needed. After compared with 3M, Bergquist and Fujipoly products, the customer selected GLPOLY silicone-free thermal gel XK-GN30. GLPOLY silicone-free thermal gel XK-GN30 features 3.0W/mK of thermal conductivity, 0.09mm bondline thickness, providing excellent thermal performance. in two months high temperature test, no issues came to the list. GLPOLY became one of customers reliable supplier.

Although technologies over electrical vehicle has been developed for years, we still dont have a perfect thermal management solution over electrical vehicle battery pack. Besides the reasons of battery pack structure, I think thermal interface materials has a great impact on thermal management. The market of thermal gap filler(thermally conductive adhesive) looks very chaotic, many thermal gap filler was called thermal adhesive for structure bond, actually, they are still thermal silicone encapsulant in essence. Moreover, some engineers dont know thermal materials very well and state requirements unclear, resulting a unsatified trial and failed impression on domestic brand. Many manufacturers only concerned to thermal conductivity and laid less attention on other parameters, such as curing time, curing status, bond strength, maintaince. GLPOLY thermal gap filler (thermally conductive adhesive) XK-D25H is epoxy based, high performance and good electrical insulation thermal adhesive which had been improved from traditional epoxy adhesive. Mix ratio is 1:1 by volume, just a few of manufacturers can accomplish it, for example, 3M thermally conductive epoxy adhesive mix ratio is 2:1. It is truth that data can be checked out from website. GLPOLY thermally conductive adhesive (thermal gap filler) XK-D25H features 1) short curing time, draft in 5 minutes and become steady in 12 hours, 2) semi rigid after curing, protect battery modules by dampening vibration, 3) Improved bond strength greater than 3.7Mpa, 4) mix ratio 1:1 by volume, fit for dispensing equipment. One of battery customers tested and compared materials among five suppliers, they checked thermal conductivity, electrical insulation, curing time and bond strength and so on. Two of suppliers were eliminated because of longer curing time that it is unfavourable for process. In the high temperature aging test, GLPOLY thermally conductive adhesive (thermal gap filler) XK-D25H performed normally, the variety of parameters are less than 10%. The competing one failed because of week bond strength, and moreover, its mix ratio is 2:1 which is unfavourable for customers robot system. Besides stable thermal performance, GLPOLY thermally conductive adhesive provides reliable physical ptoperties. 1)filling gaps under low pressure, 2) low stress, 3) strong structure bond. GLPOLY thermal materials has been applied in military equipment because of high performance and reliable properties. Thermal gap filler is on trial in battery pack in four major enterprises. GLPOLY thermal materials help you keep you devices cool and well performed.

Strong products: CaF2/BaF2/MgF2/LiF/Si crystal blanks/rods and their windows/lenses/wafer.

1. Raw materials: ferrosilicon scrap, ferrosilicon powder and binder 2, the production process Sampling and testing raw material ferrosilicon scrap, ferrosilicon powder, in line with the production indicators, the ferrosilicon powder and binder into the mixer and stir evenly, through the conveyor belt into the ball press into a 10-50mm sphere, Output through the conveyor. Sampling and testing the finished silicon iron ball, sent to the second-three test room for testing, the test results meet the customer's requirements and then bagged and ready for shipment. 3. Product index Si: >65%; C: 2.0%; P: 0.05%; S: 0.03%; Al: 3.0%; Fe: 15-20% Size: 10-50mm 90%min, Package : 1 Mt Big Bag 4. Characteristics: The same effect of ferrosilicon and ferrosilicon is the indispensable deoxidizer and alloying agent in the steelmaking process. It can improve the furnace temperature, increase the fluidity of molten iron, effectively discharge slag, and improve pig iron and castings. Toughness and cutting ability. First, the uniform granularity reduces the loss, labor, electricity and transportation of the natural block of ferrosilicon used in steelmaking. Second, the product has uniform particle size, accurate feeding, good deoxidation effect, shortening deoxidation time, saving energy, improving steelmaking efficiency, improving quality, low raw and auxiliary materials consumption, high recovery rate and reducing labor intensity. Third, the melting speed is fast, the division is even, and the power consumption is reduced. 5. Usage: The method of use is exactly the same as that of ferrosilicon.