ABOUT EMPYRES: We are one of the most distinguished Manufacturers & Suppliers of Silica Sand. There is an extensive demand for the Silica Sand in the glass and paints industry. We are catering to some of the most reputed clients based in India with our high quality Silica Sand.
Basisil-200 is a hydrophilic fumed silica with a specific surface area of 200m2/g, and it is synthetic, hydrophilic, amorphous silica. The original particle size can be 5- 40 nm. Itâ??s a kind of high purity white colloidal powder. Widely used in coatings, printing ink, resin, silicone sealant, adhesive etc.
We are offering an enormous range of Silica Sand according to our clients'' needs. In compliance with set industry standards, the provided sand is availed at our well-maintained production unit from our own mines based in sawa(chittor). Our offered products can be availed by our precious clients at very reasonable prices.
There is no any materials which contains carcinogenic substances in this product. All kinds of phthalate tests are made.
Precipitated Silica Tyres & Rubber Application Oral Care Applications Anti Caking and Free Flow Application Carrier for Feed Application Cosmetics Application Detergents Laundry & Home Care Application Pesticide Application Pharmaceuticals Polymer Application Dry Bonding Agent Application Alumino Silicate Paints & Coating Application Paper Application
TYPICAL SILICA PRODUCT PROPERTIES : ABRASIVE SILICA Grade / Properties Unit ABSIL100(L) ABSIL100(C) ABSIL100 ABSIL125 ABSIL200 ABSIL-HC ABSILWT Appearance White Free Flowing Powder White Free Flowing Powder White Free Flowing Powder White Free Flowing Powder White Free Flowing Powder White Free Flowing Powder White Free Flowing Powder Loss on Drying ( 1t 105'C. 2 hrs.) % 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Ignition Loss (at 1000�° C for 2 hrs. on anhydrous basis) % 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Bulk density, Tapped (While material packed) gms/lit 250.0 290.0 340.0 340.0 500.0 550.0 350.0 pH (in 5% aqueous solution) -- 7.0 7.2 7.0 7.0 7.0 7.0 7.0 SiO2 on Anhydrous basis % Min. 98.5 98.5 98.5 98.5 98.5 98.5 98.5 Soluble Salts % Max. 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Average Particle Size, (By Malvern Instrument) Microns 9.0 11.5 10.0 10.0 5.0 10.0 3.0 Refractive Index 1.4460 1.4430 1.4430 1.4430 1.4360 1.4360 1.4360 Fluoride Compatibility % >90.0 >90.0 >90.0 >90.0 >90.0 >90.0 >90.0 % 325 Mesh Screen Residue ( Wet) % 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Oil Absorption cc/gm 130.0 110.0 100.0 105.0 55.0 55.0 55.0 RDA - 70.0 95.0 150.0 150.0 200.0 180.0 150.0 PCR, % - 50.0 88.0 100.0 100.0 108.0 113.0 100.0 Total Heavy Metals (as Pb) ppm (max.) 15.0 15.0 15.0 15.0 15.0 15.0 15.0 Arsenic ppm (max.) 2.0 2.0 2.0 2.0 2.0 2.0 2.0 Viscosity, (10% Silica - Sorbitol, w/w) cps - - - - - - - Microbiological Analysis (1) Total Aerobic Plate Count cfu/gm < 300 < 300 < 300 < 300 < 300 < 300 < 300 (2) Yeast & Mold count cfu/gm < 100 < 100 < 100 < 100 < 100 < 100 < 100 (3) Gram Nagative Bacilli cfu/gm Absent Absent Absent Absent Absent Absent Absent Particle Size Distribution: Range 1(>106 Micron 710 Micron) % - - - - - - - Range 3 (
[product introduction] The product is white or gray white particles. In addition to the pore structure and adsorption performance of ordinary silica gel, it also has good water resistance, does not crack when encountering water, and has long service life. [product use] 1.It is used for drying and purification of compressed air and air separation industry as adsorbent for acetylene and carbon dioxide 2.Used as liquid adsorbent and catalyst carrier in petrochemical, electric power, brewing and other industries. 3.It is used as the buffer desiccant of ordinary silica gel protective bed. [package]: 20kg or 25kg / bag, composite bag, lined with polyethylene bag
Our technology is to produce highly dispersible silica and precipitated silica from rice husk ash based on zero waste chemical process using rice husk ash as feed and produces precipitated silica and other by-products. The technology can extract upto 70% silica from the ash. The technology has already been commercialized. The technology can produce silica for all major applications, including tires, rubber, footwear, paints, coatings, toothpaste, food & pharmaceuticals. Rice husk ash is a leftover generated after using rice husk as fuel in industrial boiler and power plants. Every year more than 20 million tons of rice husk ash is generated globally which is landfilled or dumped in open grounds, affecting the environment negatively. Our technology will use the ash and extract the advanced grades of precipitated silica, including highly dispersible silica from it. Highly dispersible silica is an advanced grade of precipitated silica which is used in energy efficient green tires to improve the performance of tires. It reduces the rolling resistance of tires while improving the grip. It results in improving the mileage of vehicles while reducing the greenhouse gas emissions from the vehicles. The technology has various advantages over conventional precipitated silica production technologies. The conventional technology uses sand as a base material for silica whereas our process uses rice husk ash as a base material for silica. The technology can produce better quality silica as compared to existing conventional methods. USES/APPLICATION : Tires Toothpaste/Oral care Paints, Coatings & Inks
Silica Powder is commonly used as a primary ingredient in the production of virtually all varieties of ceramic glazes, glassware and ceramics. Also, it is used as the filler in acid proof cements, putty, paints,epoxy and polyester resins. Moreover, it stands high on purity, perfect composition and freshness. Chemical Formula : SiO2 PHYSICAL PROPERTIES : Appearance- White free flowing powder Oil absorption- 25 to 35% Sp. gravity- 2.6 - 2.7 Loss on lgnition- 0.3% max PH of 10% aqueous solution- 7 (neutral) CHEMICAL COMPOSITION : SiO2- 99.9% Fe2O3- 0.1% CAO-0.0033% AI2O3- 0.013 Industrial Applications : Paints, Plastic & Rubber , Construction
It´s the main raw material of precision casting, glassceramic, refractory and electrical appliances. Also the sound filler of paint in the chemical industry. Grain size: 0-1-3-5mm, 0.4-0.6mm , 0.25-0.4mm etc. Powder size: 200mesh , 325mesh( D50=12um) etc. Contact person: Danny Tao
SiO2 - 96% Fe2O3 - 1200ppm
SiO2 97% above
Silica Sand available with a Silica content of 99.9% . 27 USD per mt , FOB Malaysia .
Silica Sand is used in variety of industries: be it a water filtration, glass manufacture, sand blasting or any other industries. We take an honor to introduce ourselves as the responsible Manufacturer and Supplier of Silica Sand in Bhuj (Gujarat). Our Silica Sand is available in proper packing to keep its characteristics intact for a longer period of time. We can provide Silica Sand in small as well bulk quantities as per the demands of buyers.
SiO2 98% Fe2O3 0.1% Al2O3 0.6% CaO 0.3% LOI1000 0.4% Average sizing 0.3mm Portage Silica sand has many applications. It can be used in glass manufacturing, foundries, ceramics and other specialty products. Portage sand also performs well in high strength concrete.
Silica sand has many applications, where the glass making is the foremost application. JLD Minerals has a very high-quality silica sand to offer, which is used in paints, plastics, rubber, glass and ceramics. Feel Free to contact us for best quote.
Chemical and physical properties Properties Unit Specification SiO2 % = 85 - 97 Cl %
Silica fume, also known as microsilica, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product during silicon and ferrosilicon alloy production. According to the SiO2 content, our products can arrange form grade 85% to grade 98%. According to the bulk density, we can divide our products into densified silica fume and undensified silica fume.
We are exporters of Silica Quartz with SiO2 : 99.9%. Interested buyers can contact us through email id :
Fumed silica is the superfine micro-nano fine chemical product, which is divided into hydrophilic type and hydrophobic type in accordance with their different surface treatments. Its appearance is white powder. Native particle size ranges from 5nm to 40nm, with significant functions of thixotropy, reinforcing, thickening and filling. Therefore, it is widely used in the industries of rubber, sealant, plastic, resin, paint, printing ink, papermaking, medicine, cosmetics, food etc.
