Description:
MARSO CLM COL Gard is designed to protect
the edges of columns in structures.
Materials:
MARSO CLM Col Gard is made of a high impact resistance extruded rubber profile.
Standard color is black. Yellow reflective cover strips are available on request.
Range of sizes:
The gard is available with or without galvanized
metal insert clips with various dimensions.
Standard lengths:
The standard lengths of MARSO CLM Col
Gard are 1 meter and 1.2 meters.
Other sizes can be provided upon request.
Installation:
Place clip on the wall at a distance of 100 or 150 mm from the finished floor
level and
mark the holes positions on the wall.
* Drill holes in the wall by using suitable drill bits.
* Fasten the clip to the wall using M6/M8 screws and plastic plug.
* Slide the rubber gard from the sides. Clean the Corner gard using dry cloth to
clear dust.
Alternatively they can be fixed to the column surface using the BASF epoxy resin
Wing Length CLM65: A=65 , B=65
CLM: with clips AD: without clips adhesive type
1. Using the rotational molding process imported from abroad, the whole is formed at one time, with the characteristics of no welding and no leakage.
2. Polyethylene PE imported from South Korea as raw material, tasteless.
Product Features:
It is integrated molding, not easy to leak, tough texture, high product accuracy, clean and beautiful water tank, beautiful appearance, not easy to stain, can easily remove dirt. Collision resistance, impact resistance, good heat and frost resistance, can be used in the environment of minus 40 degrees Celsius to 60 degrees Celsius, anti-ultraviolet, not easy to embrittle, odorless, good acid and alkali resistance, convenient installation and transportation, simple to use, long time to use. Colors can be customized according to customer needs.
1. Using the rotational molding process imported from abroad, the whole is formed at one time, with the characteristics of no welding and no leakage.
2. Polyethylene PE imported from South Korea as raw material, tasteless.
Product Features:
It is integrated molding, not easy to leak, tough texture, high product accuracy, clean and beautiful water tank, beautiful appearance, not easy to stain, can easily remove dirt. Collision resistance, impact resistance, good heat and frost resistance, can be used in the environment of minus 40 degrees Celsius to 60 degrees Celsius, anti-ultraviolet, not easy to embrittle, odorless, good acid and alkali resistance, convenient installation and transportation, simple to use, long time to use. Colors can be customized according to customer needs.
A boom barrier is a horizontal bar used for creating a boom gate at checkpoints including parking, toll booths, and restricted places. It halts vehicles temporarily for physical inspection at checkpoints. It is also ideal for controlling traffic movement at busy crossings.
The global demand for boom barriers is expected to grow
Boom gate provides flexibility to control vehicle movement
It provides a strong barrier against heavy traffic
The length of the boom gate can be customized to create an effective blockade
It is good for creating temporary restrictions like during the night
This flexible barrier works like any other gate and disappears upon opening
We are proud to introduce our inhouse manufactured road blocker and Rising bollards. All of our products are backed with 2 years parts and labour warranty. When safety matters it is important to be in direct touch with the original manufacturer; Aykarmak Biliim Mh. Mak. San. Tic. Ltd. Iti. in Istanbul.
Herebelow you may see an introduction of our product line.
Road blocker
Road blocker is a gate security system for keeping vehicle passage under your control. Our system is proven to safely block 30 tone's per axle. Road blocker's power driven barrier allows safe access only with a tip of finger.
Road blocker can be manufactured according to sizes required by the customer. Standard dimensions are 1000x3000x800 mm - 1000x4000x800 mm - 1000x5000x800 mm.
Packed in wooden casings
768 Traffic Safety Devices Suppliers
Short on time? Let Traffic Safety Devices sellers contact you.
Shandong Guanxian Litai Composite Material Co., Ltd. is a manufacturing and sales enterprise for highway guardrail(also named crash barrier), post spacer ,end terminal and other accessories.
Quick Details
Place of Origin: Shandong, China
Brand Name: Litai
Material: Q235 or Q345
Surface treatment: Hot Dipped Galvanized
Zinc coating: 550-1100g/m2
Technology: Hot dip galvanized
Feature: Anti-corrosion
Certificate: ISO BV SGS
Name: Highway guardrail
Usage: Road Traffic Safety
Shape: Two Waves
Application: Road Highway Bridge
NOMO: self cleaning street light is specially designed to provide a huge range of applications. Especially in places where it seldom rains. Irobot Street light can self clean the dust or any other particles from the surface of the solar panels. Itâ??s great advantage to have a built-in self cleaning system. Setting by oneself commanding twice a day, swipe cleaning back and forth that totals up to 4 slides via our transmitting unit. Time setting can be adjusted in your favor from your account on DTU.
Solvent road marking paint, also known as cold paint, road marking paint, is an economical marking paint. Due to its low construction cost per unit area, rapid drying, high construction efficiency and strong application, it is widely used in urban roads and general roads in China, including urban roads, national roads, provincial roads, pedestrian crossings, and residential parking lots. "Yida" brand high-quality cold paint adjustment technology formula, the use of superior materials to develop new cold paint, in terms of gloss, color and coverage rate and other performance greatly exceed the market similar products.
The company provides fixed cooling paint according to customer needs.
Thermoplastic reflective road marking paint is a new type of pavement marking paint developed on the basis of the original hot-melt road marking paint by appropriate improvement of coating formulation and construction technology. It is mainly composed of C5 petroleum resin, and various additives, pigments, hot-melt special glass beads, etc. are added to form a powdery solid coating, which is heated from 180 ° C to 220 ° C by a hot melt kettle.
Crowd Control Barrier, also known as pedestrian barrier, is an effective crowd control and site demarcation product extensively used in public areas, such as event, sport venue, public rallies, demonstration, outdoor festival, concerts. They are considered versatile with the following functions:
Direct pedestrian traffic.
Keep the crowd in a designated area.
Protect cordoning off restricted areas.
Designate space for lines.
Control large gatherings.
Deter motorists and pedestrian entering.
Create allocated walkways.
Also can be used at construction sites and road works
We can custom Temporary Fence
Ground protection mats are tough and versatile enough for a huge range of applications. They are used extensively for construction, oil, gas and water well drilling, geotechnical applications, landscaping and grounds maintenance, concrete supply, excavation and trenching, caravan and leisure parks and endless other uses.They can protect turf from damage when heavy vehicles need to cross grassed areas and prevent equipment and vehicles from losing traction or sinking into soft ground and sand.The mats do not suffer from the problems associated with using plywood for temporary roadways. They are virtually unbreakable, are not affected by water (no absorption, warping, rotting, delaminating) so can withstand the toughest conditions.
Specification:
sizes:2000x1000mm,3000x1500mm,2440x1220mm,2440x601mm,2900x1100mm,3000x2000mm,4000x2000mm
thickness:12.7mm,15mm,18mm,19mm,20mm,25mm
color:black,red,blue ect
YT Nano-fluorescent self-luminous cat eye road stud delineator with glass beads
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF10 (2)YF10 (3)YF10 (5)YF10 (4)YF10 (1)YF10 (1)YF10 (3)YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT round circle self-fluorescent double sided road stud with reflective film
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF05
Product name
YT round circle self-fluorescent double sided road stud with reflective film
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF05 (6)YF05 (2)YF05 (5)YF05 (6)YF05 (1)YF05 YF05 (2)YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT Factory Energy Storage Self-luminous Highway Road Reflective Delineator as Traffic Signs
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF18
Product name
YT Factory Energy Storage Self-luminous Highway Road Reflective Delineator as Traffic Signs
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF18 (4)_YF18YF18__
YF18 (3)YF18 (2)
YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT transparent self-luminous ABS road stud delineator as a traffic signal
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF14
Product name
YT transparent self-luminous ABS road stud delineator as a traffic signal
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF14 (6)_YF14 (1)_YF14 (6)YF14 (1)YF14 (1)_YF14 (1)YF14 (2)YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT hangzhou energy storaged square self-luminous road stud with cat eyes
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF01
Product name
YT hangzhou energy storaged square self-luminous road stud with cat eyes
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF01 YF01 YF01 (4)YF01 (1)YF01 (5)YF01 (5)YF01 (3)YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT yellow shell self-luminous rectangle reflector road studs with cat eye
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
yf03_YF03 (1)YF03 (9)YF03(8)YF03 (7)YF03 (4)YF04 YF03 (3)_YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
Product Code YRG41
Product name China Supplier High Reflective Trapezoid Plastic 213 Glass Beads Reflector for truck
Material ABS base+glass beads
Color white/ yellow/ red/ green/ black
Size 213 beads
Weight 34g
Application reflective panel, road stud, delineator, speed humb, etc,
Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity
Payment terms T/T, L/C, Western union, Trade Assurance
Sample One free sample but freight is paid by customers
