Epsilon’s new Photosnake system is specially designed for inspection of difficult-to-access or confined work area. It has 3.5” LCD TFT screen, 4 powerful white LED Lights with adjustable light intensity & 8.8 mm outer lens. Camera unit is water splash resistant. Zoom in /out up to 5X facility available. Adjustable handle 0°, 45°, 80° & changeable screen’s angle 0° to 90°. Flexible cable of 100 cm length. Very convenient design for operator comfort. Quite economical & attractively priced. Very useful in turbine & engine inspection, view inside castings and cylinders for defects, car repair & maintenance, pipe review & repair, tight area surveillance, take photo inside the water & parts assembly.
This product made by copper.
Model:SKLON-N models ultrasonic cell processors Easy to operate.Crushing capacity from 0.5ml to 1200ml . (sonicator,ultrasonic homogenizers,ultrasonic processor,ultrasonic cell crusher,ultrasonic cell disrupter) Parameters: Models Ultrasonic Frequency(KHZ) Maximum Output Power Duty Ratio(%) Optional Variable Amplitude Lever(¡é) Included with Machine Capacity per time(ml) electricity Supplyl(V) Temperature Control SKL150-IIN 20-25 150 W 1-99% 3 mm 6mm 10-100ml 220/110 No SKL250-IIN 20-25 250 W 1-99% 3 mm 6mm 10-200ml 220/110 No SKL650-IIN 20-25 650 W 1-99% 2,3,8,10,12,15mm 6mm 0.5-500ml 220/110 No SKL650-IIDN 20-25 650 W 1-99% 2,3,8,10,12,15mm 6mm 0.5-600ml 220/110 YES SKL1200-IIIN 19.5-20.5 1200 W 1-99% 15,25mm 20mm 50-1000ml 220/110 No SKL1200-IIIDN 19.5-20.5 1200 W 0.1-99.9% 15,25mm 20mm 50-1000ml 220 or 110 V YES SKL1800-IIDN 19.5-20.5 1800 W 0.1-99.9% 25,28mm 25mm 50-1200ml 220 or 110 V YES Ultrasonic Dispersing and Deagglomeration: The dispersing and deagglomeration of solids into liquids is an important application of ultrasonic devices. Ultrasonic cavitation generates high shear forces that break particle agglomerates into single dispersed particles. Ultrasonic Emulsifying: Emulsions are dispersions of two or more immiscible liquids. Highly intensive ultrasound supplies the power needed to disperse a liquid phase (dispersed phase) in small droplets in a second phase (continuous phase). In the dispersing zone, imploding cavitation bubbles cause intensive shock waves in the surrounding liquid and result in the formation of liquid jets of high liquid velocity. At appropriate energy density levels, ultrasound can well achieve a mean droplet sizes below 1 micron (micro-emulsion). A wide range of intermediate and consumer products, such as cosmetics and skin lotions, pharmaceutical ointments, varnishes, paints and lubricants and fuels are based wholly or in part of emulsions. Ultrasonic Cell Disintegration This effect can be used for fermentation, digestion and other conversion processes of organic matter. After milling and grinding, ultrasonication makes more of the intra-cellular material e.g. starch as well as the cell wall debris available to the enzymes that convert starch into sugars. It does also increase the surface area exposed to the enzymes during liquefaction or saccharification. This does typically increase the speed and yield of yeast fermentation and other conversion processes, e.g. to boost the ethanol production from biomass.ultrasonic treatment can disintegrate fibrous, cellulosic material into fine particles and break the walls of the cell structure. This releases more of the intra-cellular material, such as starch or sugar into the liquid. In addition to that the cell wall material is being broken into small debris. Ultrasonic Cell Extraction The extraction of enzymes and proteins stored in cells and subcellular particles is an effective application of high-intensity ultrasound, as the extraction of organic compounds contained within the body of plants and seeds by a solvent can be significantly improved. Ultrasound has a potential benefit in the extraction and isolation of novel potentially bioactive components, e.g. from non-utilized by-product streams formed in current processes.
Parameters: Models: Output Frequency (kHZ) Power output Included Amplitude probe(mm) Optional Amplitude probe(mm) Temperature control intergrated Crushing capacity (ml) SKL-250WL 20 250w dia 6mm 3,6 no 10-200 SKL-500WL 20 500w dia6mm 2,3,6,8,10 no 0.5-500 SKL-750WL 20 750w dia6mm, 2,3,6,8,10,12 no 0.5-600 SKL-900WL 20 900w dia6mm 2,3,6,8,10,12,15 no 0.5-600 SKL-950WT have temperature control 20 950w dia6mm 2,3,6,8,12, 15,18 yes 0.5-600 SKL-1200WL 20 1200w dia6mm ,10,12, 15,20 no 50-1000 SKL-1500WL 20 1500w dia20mm 6,10,12,15,20, 25 no 50-1000 SKL-1800WL 20 1800w dia25mm 6,10,12, 15,20,25 no 50-1200
Functions: It can measure pH,mV(ORP) and temperature. LCD display, English operation system Automatic and manual temperature compensation, self-calibration, and self-calculation of electrode percentage theoretical slope Five types of pH buffer solution can be chosen to conduct automatic calibration (one point or two points) Test results can be stored, deleted, viewed and printed. The amount of data can reach the maximum of 200 sets. It has RS-232 interface, and it can be connected to TP-16 printer. Also, the interface can be used to connect data collecting software and computer. It can be used to measure pH value of ultrapure water, pure water and boiling water by adjusting equipotential point and choosing specific electrode. It is equipped with E-201-C pH combined electrode and T-818-B-6 temperature electrode. Specifications: 1.Measuring range pH£º(0.000~14.000)pH mV£º(-1999.9~1999.9)mV Temperature: (-5.0~105.0)¡æ 2.Resolution pH£º0.1pH¡¢0.01pH¡¢0.001pH mV£º0.1mV Temperature: 0.1¡æ 3.Accuracy: pH£º¡À0.005pH¡À1 bit mV£º¡À0.2mV (¡À399.9mV) ¡À0.03% FS Temperature:¡À0.3¡æ¡À1 bit 4.Input impedance>=3¡Á1012¦¸ 5.Stability:£¨¡À0.005pH¡À1bit£©/3h 6.Temperature compensation range: Manual/Automatic(-5.0¡«105.0)¡æ 7.Power supply: DC power (9V DC£¬300mA£¬inside positive and outside negative) 8.Dimension(mm)£º280¡Á210¡Á90 9.Weight: 1kg 340*270*280mm/unit 2.5kg
Functions: It can measure pH,mV(ORP) and temperature. The instrument is equipped with large LCD Touch Screen and English operation system for easy use. Several kinds of pH buffer solution can be chosen for instrument calibration. Furthermore, the buffer solution can be prepared by users. The instrument can recognize five types of buffer solution automatically. It has many functions such as automatic and manual temperature compensation, self-calibration and self-calculation of electrode percentage theoretical slope. The data can be stored, deleted, printed and viewed, and the quantity of measuring data can be maximized to 200 sets. It has standard RS-232 and USB interface. To match with data collecting software, it can be communicated with computer. It is equipped with E-201-D pH combined electrode and T-820C temperature electrode. Specifications: 1¡¢Measuring range pH£º£¨-2.000~18.000£©pH mV£º£¨-1999.99~1999.99£©mV Temperature: £¨-5.0~105.0£©¡æ 2¡¢Resolution pH£º0.1 pH ¡¢ 0.01 pH ¡¢0.001pH mV£º0.1mV ¡¢ 0.01mV Temperature: 0.1¡æ 3¡¢Accuracy: pH£º¡À0.002pH¡À1 bit mV£º¡À0.03% FS Temperature: ¡À0.2¡æ¡À1 bit 4¡¢Input impedance>=3¡Á1012¦¸ 5¡¢Stability: £¨¡À0.002pH ¡À1 bit£©/3h 6¡¢Temperature compensation range: manual/automatic £¨-5.0¡«105.0£©¡æ 7¡¢Power supply: AC (220V¡À22) V£»(50Hz¡À1)Hz 8¡¢Dimension£¨mm£©£º250¡Á195¡Á100 9¡¢Weight:2kg 370*310*340mm/unit 4kg
1. Static hydraulic four-wheel drive; 2. Automatic Shift of high and low moving speed; 3. Two working modes including moving and operation; 4. Three turning modes including front wheel turning, full wheels turning and crab turning; 5. Convenient connection devices for working appliances make working appliances replaced faster; 6. Multi-purpose operation handle: only one handle completes all operations; 7. Hydraulic-driven cooling system: the water tank & motor are disposed respectively to avoid bigger space requirement when they are disposed together, which makes the water temperature of the motor keep at the optimal level. 8. Lognitudinal stability indicating system and rollover protection system enhance operation safety; 9. ROPS/FOPS cab has the ability to protect drivers safety.
It works with four-wheel drive, hydromechanical transmission, hydraulic power steering, hydraulic brake, and rear-wheel steering. The handling equipment is telescopic boom, standard model installs moving fork. Besides smooth joystick controls and a wide range of attachments, we also can offer the right machine meet your specific requirements. Shovel loader, derrick boom and hook for selecting to install
Binocular tubes: 45deg. Inclined or straight Magnification: 5x to 25x Eye pieces : 12.5x / 15x dioptric adjustment Objective lens: f=200 mm Field of view : 50mm Ipd adjustment: 55mm to 75mm Fine focusing : by motorized foot control Illumination: 15v/150w twin halogen lamps with 100% coaxial through the lenses Focused fiber optics light guide 1.5 Meter, white bright light more than 80, 000 lux when maximum. Field of illumination: 70mm Filter: cobalt blue, green Arm: counter balanced pantographic Arm with 320 degree rotation. Vertical range of counter Balanced arm: 250mm to 300mm Floor stand: mobile floor stand on caster wheels For easy handling and absolute stability. Base : 600mm x 500mm (approx) Height : 1500mm (approx.) Weight : 65kg (approx.) Power : ac 220v, 50/60hz. Spares: dust cover for covering the microscope, set of sterilizable of silicon caps, 15v-150w bulbs, fuses. 60 x 50 x 60 cm
Scientific instruments.
Microscope digital camera m30 is characterized by high rate, high clarity, high signal-to-noise ratio, true color reproduction, easy installation, multi-purpose, compete function, simplifyingf¼makes it possible for the common optical microscope to upgrade to be digital microscope, for the image under the microscope to timely display on computer by usb, and for the majority of professional use. High-end microscope digital cameraf¼high rate, high clarity, high signal-to-noise ratio, true color reproduction, image clear, high sensitivity, easy and flexible to handle. 1. The productf+s technical characteristics Microscope digital camera m30, the maximum resolution for previewing is 2048x1536 pixels (3.0 megapixels). Its dynamic displaying frame rate is higher than the same category of this product with the same pixel, and itf+s suitable for rapid convergence. By the achievement of combination in pixels because of hardware, it supports the resolution which is smaller than itself, improves the sensitivity, and increases the previewing speed. The hardware adopts the transducer with low noise and high dynamic range, thus guaranteeing the perfect quality of micro-vision. 2. Selective real-time previewing frame rate 3. High-speed real-time previewing in full pixels 4. True color reproduction (better performance than the ordinary ccd camera) 5. Easy to install and use 6.With software that disposes timely and measures dynamically, leading real-time processing and dynamic measurement, unique rgb color parameter memory Packing list Microscope digital camera 1 Usb 2.0 line 1 S-viewers software cd 1 Product description 1
1 meter brass telescope made of brass with wooden & brass made tripod with 35x power Lence. Standard Export Packing Weigh approx 5kg.
Telescopic ladders
Main Technical Parameters Lens chip type: Color 1/12" CCD Pixels: 380, 000 Sensitivity: 1.0 LUX Anti-glare function: Have Lens Viewing Angle: 60 ° Lens size: 5.5mm/6mm Lighting System: 8 high-brightness LED light source Display: 4.3" LCD display Waterproof standard: IP67 Detection length: 1.5m (standard), 3m (optional) Inner sheath: Flexible stainless steel twisted tube Outer sheath: Stainless steel wire braided layer. 42 cm (L)í-33.5 cm (W)í-12.7 cm (H) Gross weight:3kg.
Microwave is a therapeutic instrument integrated with heat and no-heat effects. The microwave has a strong passing through character and will improve the metabolite of cells in the deep tissues to accelerate the blood circulation to raise the activeness of enzymes, to reduce the nerves stimulation and to enhance the immunity. Therefore, it can function to dephlogisticate and to relieve pains. The therapy generates no side effects orpains(not over use). The instrument is easy to operate and can provide obvious results.
BRM-A type portable color microcirculation microscope can not only observe the situation about nail foldf+s capillary flow, but also could be carried out for microcirculation observation of all parts of human body; with the light physical appearance, excellent clarity, when it is used for observing the microcirculation, the lens apparatus shall be put in front of the area, such as nail fold, auricle, lips and other parts of micro-cycles). Just fine-tune to fix the focal length, you will see the blood and capillary blood flow, abnormal microcirculation of the vascular structure, blood flow, cell adhesion, and vascular damage and other changes clearly; this device can actually see effectiveness on the microcirculation of the human body from the far-infrared, nanotechnology, bamboo charcoal and other commodities. Size: 40X29X14 cm3 Weight: 5kg.
76mm (3 inches) concave objective mirror Focal length : 700mm 20mm eyepiece 12mm eyepiece 4mm eyepiece 2x barlow lens Moon filter Large collapseable tripod with accessory tray Alt-az type telescope mount Dust free eyepiece cleaning cloth Map of the surface of the moon & giant solar system poster
Specifications: Binocular is impact resistant and rubber-armored for protection and increased durability Superb light transmission through fully-coated optics provides great performance and sharp images Rokinon's infra-vue ruby-coated lenses reduce uv glare and eye fatigue Neck strap and carrying case are included 10x power Field of view: 6.5 degrees or 342' / 1, 000 yards Exit pupil: 5.0 Eye relief: 14.5mm Relative brightness: 25 Weight: 24 oz.
Made of brass with a length of 1.03 mtrs and a sstand of height adjustment of 1.50 mtrs.
Made of brass with a length of 1.03 mtrs and a sstand of height adjustment of 1.50 mtrs.
