Production information of scaffolding board below, The normal size of scaffolding board 38/42*225/230*3960/5960mm; Material: 100% radiation pine. Glue: wbp, meiamine, mr. Moisture content: below 14% Thickness tolerance: +/- 1mm Width tolerance: +/-1mm Length toelrance: +/- 3mm Weight: under 270kg/square meter.
Cup-lock scaffolding system Cup-lock scaffolding system is a multi-purpose system scaffold, suitable for access and formwork support in all types of construction of building & civil engineering projects. Components: *cup-lock standard with spigots, cup-lock ledger, diagonal brace, intermediate transom Base jack, metal plank or catwalk Product feature: -simple. Components allow the easy creation of cantilevers, inside platforms and stair cases. -lighter. 20% lighter than coupler & pin scaffolding system -safe to erect and use Size Standard Length(m) Weight(kg) Self finish Painted Hot galv. L=0.50 2.42 2.5 2.57 L=1.00 4.84 4.98 5.13 L=1.30 6.54 6.74 6.93 L=1.50 7.25 7.47 7.69 L=1.80 8.96 9.22 9.49 L=2.00 9.67 9.96 10.25 L=2.30 11.37 11.71 12.05 L=2.50 12.08 12.44 12.81 L=3.00 14.5 14.93 15.37 Ledger Length(m) Weight(kg) Self finish Painted Hot galv. L=0.60 2.38 2.45 2.52 L=0.90 3.44 3.55 3.65 L=1.00 3.8 3.91 4.03 L=1.20 4.51 4.65 4.78 L=1.30 4.87 5.01 5.16 L=1.50 5.58 5.75 5.91 L=1.80 6.65 6.85 7.05 L=2.00 7.36 7.58 7.8 L=2.50 9.14 9.41 9.69 Intermediate transom Length(m) Weight(kg) Self finish Painted Hot galv. L=0.60 3.59 3.7 3.8 L=0.90 4.66 4.8 4.93 L=1.00 5.01 5.16 5.31 L=1.20 5.72 5.9 6.07 L=1.30 6.08 6.26 6.44 L=1.80 7.86 8.09 8.33 L=2.00 8.57 8.83 9.08 L=2.50 10.5 10.66 10.97 L=3.00 12.13 12.46 12.86
Adto ring-lock scaffolding system consists of hot dipped galvanized steel pie and modular components that are assembled together using integral wedge connectors. Adto ring-lock system is a modular scaffold system which can provide major saving in labor cost while meeting the demands for safety, ease of handling and reductions in maintenance. Components: Ring-lock standard with spigot, ring-lock ledger, ring-lock diagonal, wedge pin, base collar, steel plank, steel stair case. Feature: 1.Time efficient during assembly and dismantling 2.Safe and simple one-man assembly 3.No loose parts 4.Maintenance free Ringlock standard with spigot (48.3mm x 3.2mm, q345, hot dipped galvanized) Description Weight/ length Ring-lock standard 500mm 2.76kg Ring-lock standard 1000mm 5.18kg Ring-lock standard 1500mm 7.61kg Ring-lock standard 2000mm 10.03kg Ring-lock standard 2500mm 12.45kg Ring-lock standard 3000mm 14.87kg Ring-lock standard 4000mm 19.72kg Ringlock ledger (48.3mm x 3.0mm, q235, hot dipped galvanized) Description Weight/ length Ring-lock ledger 1000mm 4.62kg Ring-lock ledger 1500mm 6.50kg Ring-lock ledger 2000mm 8.38kg Ring-lock ledger 2500mm 10.27kg Ring-lock ledger 3000mm 12.16kg Ringlock diagonal (48.3mm x 3.2mm, q235, hot dipped galvanized) Description Weight/ length Ring-lock diagonal 1000x2000mm 10.06kg Ring-lock diagonal 1500x2000mm 10.95kg Ring-lock diagonal 2000x2000mm 12.13kg
Steel planks Steel planks is one of the most important products of adto. Adto steel plank is china top one steel board manufacturer. 80% of adto steel planks are for export and have gained high reputation over the world. Adto steel planks enjoys many advantages.Some are list as below: 1. Light weight, nice looking and high loading capacity; 2. Effective service life reaches 5 years, low investment but high returns; 3. Secondary resources recovery; 4. Galvanized surface, fire proof and anti-slide; 5. Rib reinforcement design to strengthen the plank’s loading capacity and ensure good drainage; 6. Patent holes design to reduce the planks weight; 7. Plain stiffeners, box type stiffeners and trapezoid stiffeners choice, meet different customers requirements. Item Size(mm) Thickness Length 210 210*45 1.0-2.0mm 0.5m-4.0m 225 225*38 1.0-2.0mm 0.5m-4.0m 240 240*45 1.0-2.0mm 0.5m-4.0m 250 250*50 1.0-2.0mm 0.5m-4.0m 230 230*65 1.0-2.0mm 0.5m-4.0m 225 225*38 1.0-2.0mm 0.5m-4.0m 300 300*50 1.0-2.0mm 0.5m-4.0m
Scaffolding & Shuttering Material,Adjustable Telescopic Prop , Adjustable Beam Span, Cuplock Scaffolding System,Vertical,Ledger , Coupler, Scaffolding Accessories , H frame & Cross Bracing
Scaffolding & Shuttering Material,Adjustable Telescopic Prop , Adjustable Beam Span, Cuplock Scaffolding System,Vertical,Ledger
Surface Finished: Natural/ Electroplated/ Galvanized/ Painted Manufacturing process: Forged/ Sheet Metal
(2.00–3.75 Mtrs. Adjustment) (Std.) (2.0 x 2.0) (2.50–4.25Mtrs. Adjustment) (2.0 x 2.5) Size: PSP-5 (3.00–4.65 Mtrs. Adjustment) (2.0 x 3.0) Size: psp4 (2.00–3.75 Mtrs. Adjustment) (Std.) (2.0 x 2.0),Weight 18 Kg
Scaffoldings
Rimmca stf 20 is a fast, hand-set floor-slab formwork system which is made up of several basic components. You can form every slab thickness, every layout and every height with rim stf 20. The system allows for large spans, and this reduces the number of parts that have to be moved. Rim stf 20 thus represents efficient working in any type of requirement. High load-bearing capacity Large spans reduce the number of parts, it can be optimised for all slab thicknesses and geometries through the selection of the girders and girder combinations Cost-efficient Depending on the prop type, fewer girders and props, the economic choice due to cost-efficient components that can be used again and again Adaptable Adaptable to any layout and floor extension thanks to the overlapping of the girders, it owns perfect adaptability to walls and columns. Freely selectable Plywood and props can be chosen depending on demands and requirements Rimmca professional technical team and perfect after-sales service is committed to give you the best experience
Rimmca table formwork ttf 20 adapts to any slab type. It is perfect for projects in building construction with high demands for finishing quality, safety and efficiency. Perfect adaptability Greatest stability and load capacity guarantee rim ttf 20 can meet all geometry of the structure, it can also be used as cantilevered edge with bracing Lower labour cost Rim ttf 20 is easy and practical to set up and can be shifted and adapted very quickly.This makes them a cost-effective and efficient way of carrying out large-area slab projects Convenient Fast moving from floor to floor in horizontal position with transportation trolley and comfortable transportation with fork in vertical direction Rimmca professional technical team and perfect after-sales service is committed to give you the best experience
Rimmca climbing formwork cb180 & cb240 provides safe working conditions with wall formwork at all heights. The well thought-out design combines easy handling with a fast moving procedure and problem-free adjustment to suit different building shapes.It's extremely easy to set up , and can be tailored to meet a wide range of different requirements. Strong High loading capacity of the brackets allows the formation of large scaffold units Flexibility and time-saving It is a cranelift climbing formwork for structures of any shape and inclination.By turning pressure, spindles, the climbing formwork cb240 & cb180 can be perfectly accommodated to structures whose inclination varies from one-cycle to next. Safe Wide work-platforms with plenty of space for fast, safe working Completely free of tripping hazards in front of and behind the formwork because of the wind bracing
Adaptbility Rimmca wall formwork vtf 120 adapts to various kinds of projects asking for different thickness , height & shapes of walls, like power plant, tower and apartment etc. Safety Rimmca not only provides you well-made products but also optimized and individualized solutions, avoiding the trouble back at home. Cost-economical Rim vtf 120 is a simple and efficient formwork system which most of the members can be re-use recycles.Short forming times and large optimized units can save your labour and time.
"single side formwork ssf " enable the concrete forces to be safely transferred. Its max pouring height can be up to 8.0m high. Advantages 1.Tensile forces are reliably transferred by means of diagonal anchors. 2.Modular vertical stacking facility. Optimum adaptability to the required pourheight¡, from 4.00 m up to max. 8.0 m 3.Adapts to uneven ground by means of spindles with articulated footplates 4.Adjusting for the different fresh-concrete pressures required is easy and economical¡§csimply increase or decrease the spacing between the supporting frames, as appropriate 5.The high-speed repositioning can be by crane or by traveling unit on rails or rollers.
See catalog See catalog
TypeZlp 800 Rated load 800£¨kg) Lifting speed8¨c10£¨m/min) Rated power2.2x2 Model of hoisterLtd 80 Model of safetyLsf30 Weight of suspension mechnis360(kg) Dimeno of suspended platform(lxwxh) (2500x3) x760x1450 Weight of lifting part 610 £¨kg) 450£¨kg) Wooden box/steel belt
Type 500 Rated load 500£¨kg) Lifting speed 9¨C11£¨m/min) Rated power 1.1x2 Model of hoister LTD 50 Model of safety LSF30 Weight of Suspension Mechnis360(kg) Dimeno of Suspended platform(LxWxH) (2500x2) x760x1450 Weight of lifting part 410 £¨kg) 290£¨kg) Frequency and voltage of motor can be manufactured with customer's requirements. wooden box/steel belt
Zlp800a Rated load : 800kg Ascend speed :8-10/min Suspended patform size :(2.54x3)x0.76 Wire rope :6x19w+iws-8.3 minimium breaking force :65kn Consisted of hoist s, safety lock type suspension mechanism , electric box , balance weight and wire rope and cable. Wooden box/steel belt
In compliance with gb17620-2008 and sgs Model Mr-300 mr-400 Mr-500 Mr-600 mr-700 mr-800 mr-900 mr-1000 Overall height(m) 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 Platform height(m) 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 Stretch film for inner packing, plywood case for outer packing
Use: right angle bolt clamps are designed to be used in conjunction with steel tube to create 90 degree angles. Material: forged steel Finish: hot dipped galvanized Description Weight(lbs/kgs) Right angle i-bolt clamp 2¡á2 3.35/1.52
